{"title":"wood stair nosing","description":null,"products":[{"product_id":"stair-nose-edge-edging-self-adhesive-trim-step-modern-colours-wood-carpet-0-9m","title":"Stair Nose Edge\/Edging Self Adhesive Trim Step Modern Colours Wood Carpet 0.9m","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eA Discreet Finish for Indoor Stair Edges\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis self-adhesive stair nosing trim is designed to create a cleaner finish along the exposed edge of an indoor step. It covers the transition between the horizontal tread and the front face, helping make unfinished or worn stair edges appear more consistent without requiring a prominent metal profile.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe modern colour options allow the edging to be coordinated with different staircase finishes and interior schemes. The available colours depend on the selected product variation, so the chosen finish should be checked carefully before ordering.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eUnderstanding the 0.9m Length and 9mm Depth\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe trim is supplied in a 3ft length, which is approximately 0.9 metres. This length may suit many standard residential stair widths, although every step should be measured because staircase dimensions can differ between properties and even between individual treads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe listed depth is approximately 9mm. The supplier details do not confirm the full profile width, material thickness, or vertical coverage, so these measurements should be checked where available before installation. This is especially important when the trim must meet an existing carpet, wooden tread, or adjoining floor covering.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003ePeel-and-Stick Installation Without Visible Screws\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe self-adhesive installation method is designed for straightforward application. The backing can be peeled away before the trim is positioned along the stair edge, removing the need for visible screw heads or drilled fixing holes under suitable installation conditions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAdhesive performance depends heavily on preparation. The application area should be clean, dry, smooth, and free from dust, grease, wax, polish, or loose material. The exact adhesive type, curing time, and bond-strength rating are not provided, so the trim should be pressed firmly into place and checked before the staircase returns to regular use.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eCompatibility with Wood and Carpeted Steps\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe product is promoted for use with wood and carpet stair finishes. On wooden steps, the surface should be sealed, stable, and sufficiently smooth for the adhesive to make consistent contact. Damaged coatings, dust, or uneven edges may reduce the effectiveness of the bond.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCarpet compatibility may depend on the carpet thickness, pile, edge construction, and the amount of solid surface available beneath the trim. Adhesive products do not bond equally well to every textile surface, so suitability should be confirmed before fitting across a complete staircase. The product is listed for domestic use rather than non-domestic applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eCare, Inspection and Long-Term Positioning\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRoutine cleaning can help keep the stair edge looking neat and prevent debris from collecting around the trim. A soft brush, vacuum attachment, or lightly damp cloth may be suitable, depending on the confirmed surface material. Cleaning products that leave an oily or slippery residue should be avoided around steps.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe edging should be inspected periodically for lifting, curling, or movement, particularly at the ends and front corners. Any loose section should be addressed promptly. No commercial traffic classification, adhesive durability test, or independent slip-resistance rating is included in the supplied product information.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes this stair edging require screws?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo screws are listed as part of the intended installation method. The trim uses a self-adhesive backing that is peeled away before the profile is positioned along the stair edge. The surface must be clean, dry, smooth, and stable because dust, grease, loose finishes, or uneven areas may prevent the adhesive from forming a consistent bond.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan the trim be installed on wooden stairs?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe product is promoted for wood stair edges, but compatibility can depend on the condition and finish of the timber. Sealed, clean, and level wooden surfaces are more likely to provide reliable adhesive contact than dusty, damaged, waxed, or highly textured finishes. A small area should be checked before fitting the trim across every step.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this edging suitable for carpeted steps?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCarpet is included in the listed applications, although results may vary according to the carpet pile, thickness, edge construction, and available bonding surface. Adhesive may not hold equally well on loose, deep, or heavily textured carpet. Confirm that enough firm and stable surface is available before applying the strip to the complete staircase.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWill the 0.9m length fit a standard step?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 3ft length, approximately 0.9 metres, may suit many domestic stair treads, but there is no universal stair width. Each step should be measured individually before ordering, particularly on older or custom-built staircases. The supplied information does not confirm a cutting service or provide instructions for shortening the profile.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat does the approximate 9mm depth refer to?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe listing provides an approximate depth of 9mm but does not include a detailed profile diagram explaining every measurement. Buyers should not assume this represents the total tread coverage, vertical drop, or material thickness. Confirm the complete profile dimensions where possible, especially when matching the trim to an existing floor covering.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow should the adhesive stair trim be maintained?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eKeep the profile clear of dust and debris using a soft brush, vacuum, or suitable lightly damp cloth. Avoid soaking the adhesive area or using cleaning products that leave a slippery residue. The strip should also be checked regularly for lifted ends, curled corners, or movement so any weakening of the adhesive bond can be addressed promptly.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rubber Fit Floors","offers":[{"title":"3ft x 9mm – Silver","offer_id":54455617749338,"sku":null,"price":24.99,"currency_code":"GBP","in_stock":true},{"title":"3ft x 9mm – Grey","offer_id":54455617782106,"sku":null,"price":24.99,"currency_code":"GBP","in_stock":true},{"title":"3ft x 9mm – Black","offer_id":54455617814874,"sku":null,"price":24.99,"currency_code":"GBP","in_stock":true},{"title":"3ft x 9mm – Bronze","offer_id":54455617847642,"sku":null,"price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/6516\/4890\/files\/s-l1600_362b97be-4d1e-4155-87fc-49ac4200473e.webp?v=1784704121"},{"product_id":"stair-nosing-edging-15mm-self-adhesive-trim-step-modern-colours-wood-carpet-3ft-1","title":"Stair Nosing Edging 15mm Self Adhesive Trim Step Modern Colours Wood Carpet 3ft","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eA Neat 15mm Finish for Exposed Stair Edges\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe front edge of a step is one of the first areas to show visible wear, particularly where flooring ends directly at the tread edge. This self-adhesive stair nosing trim provides a defined finish around that exposed section without requiring a screw-down installation. Its approximate 15mm depth creates a relatively compact profile that can suit staircases where a larger or more prominent trim would look out of place. The edging is intended for domestic stair applications and is available in modern colour options, allowing the selected finish to coordinate more naturally with the surrounding floor and interior. Dimensions should still be checked carefully because the existing stair shape, covering depth and edge condition will influence the final fit.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eA 3ft Profile for Full-Width Step Coverage\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEach stair edging strip measures approximately 3ft, or 0.9 metre, making it suitable for covering many standard residential stair widths with a single continuous profile. Using one uninterrupted length can create a cleaner appearance than joining several smaller pieces across the same step. Staircases are not always uniform, however, especially in older properties, so every intended tread should be measured rather than assuming that all steps share identical dimensions. The product information does not confirm whether the trim should be cut, which tools would be suitable or whether cutting could affect the finish. Any adjustment should therefore be made only after reviewing the instructions supplied with the product and confirming that the resulting edge can remain neat and secure.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003ePeel-and-Stick Installation Without Visible Screws\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe self-adhesive backing is designed for a straightforward peel-and-stick installation. Before removing the protective layer, position the trim against the stair edge and check its alignment across the complete width. The fitting surface should be clean, dry, stable and free from dust, grease, polish or loose material that could weaken contact with the adhesive. Once aligned, the backing can be peeled away and the trim pressed firmly into position. Care is required because repeated lifting and repositioning may reduce the effectiveness of the adhesive. The product does not use supplied screws, so the quality of the finished installation will depend heavily on surface preparation, accurate placement and compatibility between the adhesive, floor covering and underlying stair structure.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eIntended for Wood and Compatible Carpeted Steps\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis edging trim is intended for wooden and carpeted stair applications, but each surface requires a slightly different fitting assessment. A smooth wooden edge should be checked for loose coatings, wax, polish or surface damage before installation. On carpeted steps, the carpet should be firmly secured and stable enough to provide consistent contact rather than allowing the trim to move with loose fibres. Deep-pile, uneven or poorly fixed carpet may not provide the same adhesive contact as a smooth, dense surface. The profile should not be used to hold loose flooring in place or compensate for an unstable stair edge. Confirming compatibility before removing the backing helps reduce the risk of lifting, uneven positioning or an unwanted raised section.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eChoosing, Maintaining and Inspecting the Trim\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eModern colour options allow the stair edging to be selected according to the surrounding wood, carpet and interior finish, although the exact available colours should be confirmed from the chosen product variation before ordering. Once installed, routine cleaning can help keep the trim visible and free from debris that may gather around the stair edge. Use a cleaning method suitable for both the profile and the neighbouring floor covering, avoiding excessive moisture around the adhesive area. The trim should also be checked regularly for lifting, movement or damage, especially at the ends where repeated contact may place additional pressure on the bond. Any loose section should be addressed promptly rather than continuing to use the stair with an unstable edge profile.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this trim suitable for wooden stair edges?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes, the product is intended for use on wooden stair edges, provided the surface is smooth, clean, dry and structurally sound. Dust, polish, grease, loose paint or an uneven finish can weaken the self-adhesive bond. Test the fit before removing the backing, and confirm that the approximate 15mm depth suits the shape of the step.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan it be fitted over carpeted stairs?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe trim is described as suitable for carpeted steps, but the result will depend on the carpet construction and how securely it is fixed at the stair edge. A dense, stable surface is more appropriate than loose fibres or deep pile. Check that the adhesive can make sufficient contact and that the fitted profile will not lift or create an uneven edge.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow is the stair edging installed?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eInstallation uses the self-adhesive backing: measure and position the trim, clean and dry the stair edge, peel away the protective layer and press the profile firmly into place. Alignment should be checked before the adhesive touches the surface because repositioning may reduce the bond. Follow any instructions supplied with the product and allow the adhesive to settle before regular use.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat size is the self-adhesive stair trim?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe trim is approximately 3ft, or 0.9 metre, in length and has a listed depth of about 15mm. Measure the full width and profile of each intended step before ordering, as stair dimensions can vary even within the same staircase. The product details do not confirm whether cutting is recommended, so any alteration should be checked against the supplied instructions.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes this stair nosing provide an anti-slip surface?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied information identifies this item as a self-adhesive stair edge trim but does not state that it has a tested anti-slip insert or certified slip rating. It can create a more defined stair edge, yet safe use still depends on correct installation, a secure floor covering and regular cleaning. Avoid treating the trim as a substitute for wider staircase safety measures.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow should the trim be cleaned and checked?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRemove dust and loose debris with a soft cloth or suitable vacuum attachment, then wipe the surface gently using a cleaner compatible with the trim and surrounding floor. Avoid saturating the adhesive area or using aggressive abrasives. Check the profile regularly for lifting, movement or damaged edges, and stop using the step until any fitting issue has been corrected.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rubber Fit Floors","offers":[{"title":"15mm x 3ft – Silver","offer_id":54465295909210,"sku":null,"price":32.99,"currency_code":"GBP","in_stock":true},{"title":"15mm x 3ft – Grey","offer_id":54465295941978,"sku":null,"price":32.99,"currency_code":"GBP","in_stock":true},{"title":"15mm x 3ft – Black","offer_id":54465295974746,"sku":null,"price":32.99,"currency_code":"GBP","in_stock":true},{"title":"15mm x 3ft – Bronze","offer_id":54465296007514,"sku":null,"price":32.99,"currency_code":"GBP","in_stock":true},{"title":"15mm x 3ft – Gold","offer_id":54465296040282,"sku":null,"price":32.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/6516\/4890\/files\/s-l1600_8d8f8c41-9b79-4982-bdcb-8229e38279bd.webp?v=1784814263"},{"product_id":"stair-nosing-aluminium-30x20mm-bronze-0-90m-retro-fit-self-adhesive-grooved-edge","title":"Stair Nosing Aluminium 30x20mm Bronze 0.90m Retro-Fit Self-Adhesive Grooved Edge","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eA Retro-Fit Finish for Existing Stair Edges\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis bronze aluminium stair nosing is designed for retro-fitting onto an existing stair edge, making it suitable for renovation and finishing work where the underlying flooring is already installed. The profile creates a defined transition between the tread and riser while helping cover minor visual imperfections around the exposed edge. Its bronze finish offers a warmer alternative to standard silver aluminium and can coordinate well with traditional, neutral or wood-effect interiors. The trim is intended to provide a practical finished appearance, but it should not be used to hide structural movement, broken stair edges or loose flooring that requires repair.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eUnderstanding the 30mm x 20mm Profile\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe stair nosing measures approximately 0.9m in length, with a listed width of 30mm and height of 20mm. These dimensions determine how much of the tread and front edge the profile will cover, so both parts of the step should be measured before ordering. A 0.9m strip may cover many standard domestic stair widths, although individual steps can vary even within the same staircase. The profile should sit evenly across the edge without leaving a noticeable gap, restricting normal foot placement or creating a raised section. Measuring the complete stair build-up is especially important where flooring has already been fitted.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSelf-Adhesive Installation Without Mechanical Fixings\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA self-adhesive strip is applied to the profile to support retro-fit installation without screws or other mechanical fixings. The stair surface should be firm, level, clean and completely dry before the protective backing is removed. Dust, polish, grease, loose coatings or uneven flooring can prevent consistent adhesive contact. Position the nosing first and check its alignment across the full stair width before pressing it into place, as repeated lifting may reduce the strength of the bond. Firm and even pressure should be applied along the entire profile, followed by any settling or curing guidance included with the product.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSuitable for Vinyl, Ceramic and Laminate Flooring\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe product is described as compatible with vinyl, ceramic and laminate wood flooring. Each material requires a slightly different preparation approach. Vinyl should be firmly secured without lifting edges, ceramic tiles should be stable and free from grease, and laminate should not move independently beneath the profile. The adhesive nosing should not be relied upon to hold loose flooring in position. Surface finishes can also affect bonding performance, so compatibility should be checked before full installation. Where the stair edge is uneven, damaged or heavily textured, additional preparation may be necessary to create consistent contact across the length of the trim.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eGrooved Bronze Surface and Routine Maintenance\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe grooved edge creates a more defined contact area at the front of the stair while contributing to the profile’s finished appearance. However, the supplied information does not provide a tested slip-resistance rating, so the grooves should not be treated as a guarantee against slipping. Dust, moisture, footwear and installation quality can still affect safety. Routine maintenance should include removing grit and wiping the aluminium with a mild cleaner that is suitable for the bronze finish. The adhesive edges should also be inspected periodically, particularly at both ends of the strip, so any lifting or movement can be addressed before it becomes more extensive.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this stair nosing suitable for vinyl, tile and laminate?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The product description lists vinyl, ceramic and laminate wood flooring as compatible surfaces. The stair edge must still be clean, dry, level and firmly attached before application. Loose tiles, lifting laminate, damaged vinyl or surface contamination should be corrected first because the adhesive relies on consistent contact with a stable base.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat are the dimensions of the bronze stair profile?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile measures approximately 0.9m in length, with a listed width of 30mm and height of 20mm. These dimensions should be compared with both the tread and riser before ordering. Measuring each intended step is sensible because stair widths and edge shapes can vary, particularly in older properties or renovated interiors.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes this stair nosing require screws?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe nosing is described as a retro-fit profile with a self-adhesive strip, so it is intended to be pressed onto a suitably prepared stair edge without mechanical fixings. Position it carefully before removing the backing, then apply firm, even pressure. Repeated lifting or repositioning may weaken the bond, so alignment should be checked in advance.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the grooved edge make the stair completely slip-proof?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe source title identifies a grooved edge, but it does not provide a tested slip rating or state that the profile makes stairs completely slip-proof. The grooves can create a more defined contact surface, yet grip will still depend on cleanliness, footwear, moisture levels and secure installation. Any lifting or movement should be corrected promptly.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan the 0.9m aluminium strip be cut to fit?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 0.9m length may suit many standard steps, but actual staircase widths vary. The supplier describes the product as available in varying depths, although only the 30mm x 20mm profile is confirmed for this item. The source does not specify an approved cutting method, so check the supplied instructions before shortening or altering the profile.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow should the bronze aluminium nosing be maintained?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRemove loose dust and grit with a soft cloth, brush or suitable vacuum attachment. Wipe the aluminium with a lightly damp cloth and a mild cleaner compatible with the finish, then dry it thoroughly. Avoid abrasive pads or harsh chemicals unless the care guidance permits them, and inspect the adhesive edges regularly for lifting or movement.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rubber Fit Floors","offers":[{"title":"30x20mm x 0.90m","offer_id":54465322615130,"sku":null,"price":34.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/6516\/4890\/files\/s-l1600_b4caa12d-ff91-4ffc-8de2-8a465a4e7325.webp?v=1784815098"},{"product_id":"stair-nosing-edge-trim-aluminium-step-stair-nose-edging-strip-for-wood-carpet-2","title":"Stair Nosing Edge Trim Aluminium Step Stair Nose Edging Strip for Wood Carpet","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eA Defined Finish for Wood and Carpeted Steps\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe exposed front edge of a stair can become worn through regular foot traffic, particularly where wood, carpet or another floor covering meets the edge of the step. This 900mm aluminium stair nosing provides a structured finish that helps cover and protect this vulnerable area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIts modern matt aluminium surface gives the staircase a clean appearance without introducing an overly reflective finish. The black rubber insert creates a visible contrast across the top of the profile, making the step edge easier to identify against many common flooring colours.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile is intended for wood, carpet and other compatible flooring types. The existing stair surface must still be stable, level and suitable for mechanical fixing before installation begins.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eGrooved Profile with a Black Rubber Insert\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe stair nosing measures approximately 38.5mm across the upper face and 19.5mm down the front section. This shape allows the profile to sit around the outer edge of the step while leaving most of the original tread surface visible.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA black rubber insert is fitted into the grooved upper section. The textured insert provides additional grip around the area where footwear commonly contacts the stair edge, while the aluminium body protects the surrounding flooring transition.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe rubber surface should be kept free from dust, grease and moisture because surface contamination can reduce traction. The insert supports safer footing but does not remove the need for correct fitting, suitable lighting and routine staircase maintenance.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConcealed Fixings for a Cleaner Appearance\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFixing screws are supplied with the stair nosing, and the profile is designed to conceal the fixing points once installed. This creates a cleaner appearance than exposed screw heads while still allowing the profile to be mechanically secured to the step.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe exact installation process will depend on the material beneath the floor covering. Timber stairs may require a different preparation method from concrete or composite stair structures, so the correct drill bits, plugs and fixings should be selected for the underlying surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBefore drilling, the profile should be positioned and checked along the full width of the step. Concealed pipes, electrical cables and unsuitable structural areas should be identified before any holes are made.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eMeasuring and Preparing the 900mm Profile\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEach stair nosing is supplied in a 900mm length. Although this measurement suits many domestic stairs, individual step widths can vary, even across the same staircase. Every step should therefore be measured before cutting or installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhere trimming is required, the aluminium and rubber insert should be cut neatly using tools appropriate for the materials. Rough or uneven cuts may leave sharp edges or prevent the end of the profile from sitting flush against the side of the staircase.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile dimensions should also be compared with the thickness and position of the existing floor covering. Carpet should be firmly fitted, and wooden flooring should not be loose, damaged or uneven beneath the nosing.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eCleaning and Checking the Installed Nosing\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRoutine cleaning helps maintain both the appearance of the matt aluminium and the texture of the black rubber insert. Loose debris can be removed using a soft brush or vacuum, while ordinary marks may be wiped with a lightly damp cloth and a compatible mild cleaner.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAbrasive pads and aggressive chemicals should be avoided because they may scratch the aluminium finish or damage the rubber insert. Excessive water should not be allowed to collect around the profile or beneath the flooring edge.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe nosing should be inspected periodically to confirm that it remains firmly secured. Loose fixings, movement in the floor covering or damage to the rubber insert should be addressed promptly to prevent an uneven stair edge from developing.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this stair nosing suitable for carpeted stairs?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes, the supplied product information lists carpet among the suitable flooring types. The carpet must be firmly secured and should not bunch, move or create an uneven surface beneath the profile. The fixing screws also need to reach a stable part of the stair structure rather than relying on the carpet alone for support.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan the profile be fitted to wooden steps?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe aluminium profile is suitable for use with wooden flooring and timber stairs when the underlying material is stable and appropriate for screw fixing. The position of each fixing point should be checked carefully, and pilot holes may be required to reduce the risk of splitting or damaging the wood during installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eAre the fixing screws included with the stair nosing?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes, fixing screws are supplied. However, the suitability of the supplied screws will depend on the material and construction of the staircase. Additional plugs or alternative fixings may be necessary for concrete, masonry or other surfaces, so the installation requirements should be assessed before fitting.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat are concealed fixings?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eConcealed fixings are positioned beneath or within the finished profile so that the screw heads are not prominently visible after installation. This creates a cleaner appearance across the stair edge while still providing mechanical attachment. The profile must be installed in the correct sequence for the fixing points to remain covered.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan the 900mm length be cut to fit a narrower stair?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes, the profile can be shortened when required, but it should be cut using tools suitable for aluminium and rubber. Measure the step carefully before cutting and allow for any side walls, skirting or irregular edges. The cut ends should be smooth and free from sharp sections before the nosing is installed.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the black rubber insert prevent slipping?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe textured rubber insert is designed to add grip around the front contact area of the step. It should not be considered a guarantee against slipping, particularly if the surface becomes wet, greasy or covered with dust. Regular cleaning, secure installation and appropriate stair lighting remain important.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this nosing suitable for every flooring type?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe product is described as suitable for all flooring types, including wood and carpet, but practical compatibility depends on the floor thickness, stability and stair construction. The profile should sit evenly without compressing, lifting or damaging the flooring. Suitability should be checked before drilling or cutting.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rubber Fit Floors","offers":[{"title":"900mm x 38.5mm x 19.5mm","offer_id":54468748116314,"sku":null,"price":34.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/6516\/4890\/files\/s-l1600_bec36d9f-2bdf-4f3f-b44a-e2a6206a63f0.webp?v=1784872893"},{"product_id":"self-adhesive-aluminium-wood-metal-effect-flooring-stair-nosing-0-9m-1","title":"Self adhesive aluminium, wood\/metal effect flooring stair nosing 0.9m","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eA Neat Edge Profile for Interior Stair Finishes\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis 0.9m aluminium stair nosing provides a defined finish where an interior floor covering meets the front edge of a step. The profile can help cover the exposed transition between the tread and riser, creating a more consistent appearance around an area that often shows wear before the rest of the flooring. Its retro-fit format makes it relevant for completed interiors where the stair surface is already installed and an additional finishing profile is required. The product is listed as both a stair nosing and a threshold, so its suitability will depend on the shape of the intended edge. It should not be used to conceal structural damage, loose flooring or an unstable stair base.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWood and Metal Effects for Different Interiors\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe decorative surface is available in wood-effect and metal-effect options, allowing the profile to coordinate with different flooring and interior styles. A wood-effect finish may complement timber or wood-look floors, while a metal-effect option can provide a more contemporary transition around the stair edge. The exact colours, grains and metallic tones are not identified in the supplied specifications, so the selected variation should be reviewed carefully before ordering. Decorative finishes may also appear different under natural light, artificial lighting or different screen settings. The profile should therefore be chosen as a coordinating finish rather than assuming it will provide an exact match with an existing floor.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSelf-Adhesive Fitting Without Visible Screws\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe stair nosing is described as self-adhesive, allowing it to be fitted without visible screw heads across the finished profile. Successful installation depends on careful preparation of the underlying surface. The stair edge should be clean, completely dry, level and free from dust, grease, polish, loose paint or unstable flooring. Position the full 0.9m strip before removing the protective backing so its alignment can be checked across the tread. Once the adhesive makes contact, repeated lifting and repositioning may weaken the bond. The source does not confirm whether additional adhesive or mechanical fixings are required for certain surfaces, so the instructions supplied with the product should be followed.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eMeasuring the Stair Before Installation\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile measures 0.9m in length, which may suit many standard domestic steps, but stair widths can vary considerably between properties. Each intended tread should be measured individually rather than assuming every step is identical. The supplied information does not state the profile width, height, angle or depth, so these measurements should be confirmed from the selected product before installation. They determine how much of the tread and riser the nosing will cover and whether it will sit correctly over the existing floor transition. No approved cutting method is provided either, so the profile should not be shortened until the manufacturer’s or package guidance has been reviewed.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eMaintaining the Decorative Aluminium Finish\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRoutine cleaning can help preserve the appearance of the wood-effect or metal-effect aluminium surface. Loose grit should be removed using a soft cloth, brush or suitable vacuum attachment because abrasive particles may gradually mark the decorative finish. The profile can then be wiped with a lightly damp cloth and a mild cleaner that is compatible with finished aluminium. Harsh chemicals, scouring pads and excessive moisture should be avoided unless specifically permitted by the care instructions. The adhesive edges should also be inspected regularly, especially at both ends of the profile. Any lifting, movement or damage should be corrected promptly so the trim does not become uneven around the stair edge.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this product a stair nosing or a threshold?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe product title identifies it as a stair nosing, while the listed type is “threshold,” so it is best understood as an interior edge or transition profile. It should be used only where its shape matches the intended stair edge. Because the exact cross-section is not supplied, compare the physical profile with the tread and riser before fitting.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow is the aluminium stair profile installed?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe product is described as self-adhesive, which means the fitting surface should be clean, dry, level and free from dust, grease, polish or loose material. Position the profile first and confirm the alignment before removing the backing. The source does not confirm whether extra adhesive or mechanical fixings are recommended, so follow the package instructions supplied with the item.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhich wood-effect and metal-effect colours are available?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe title refers to wood-effect and metal-effect finishes, but the available product information does not identify the exact colours, grain patterns or metallic tones. Select the required variation carefully and compare it with nearby flooring under normal room lighting. Images and screen settings can make finishes appear slightly different from the physical product.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWill the 0.9m profile fit a standard staircase?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile length is listed as 0.9m, which may suit many standard domestic stair widths, but staircase dimensions vary. Measure each intended step before ordering rather than assuming all treads are identical. The source does not provide the profile width, height or an approved cutting method, so those details should be confirmed before trimming or installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhich flooring types can be used with this stair nosing?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe aluminium construction is intended for interior use, but the source does not name specific compatible floor coverings. It may work with suitable wood, laminate, vinyl or other finished surfaces only where the adhesive can form secure contact and the profile sits correctly. Do not apply it over loose flooring, unstable edges or heavily uneven surfaces.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow should the decorative aluminium surface be cleaned?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRemove loose grit with a soft cloth, brush or suitable vacuum attachment, then wipe the aluminium gently with a mild cleaner that is compatible with the selected decorative finish. Avoid abrasive pads and aggressive chemicals that may mark the wood-effect or metal-effect surface. Inspect the adhesive edges regularly and address any lifting before continued use.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rubber Fit Floors","offers":[{"title":"24.5mm x 20mm x 2mm – Brushed Steel","offer_id":54468780425562,"sku":null,"price":52.99,"currency_code":"GBP","in_stock":true},{"title":"24.5mm x 20mm x 2mm – Silver","offer_id":54468780458330,"sku":null,"price":52.99,"currency_code":"GBP","in_stock":true},{"title":"24.5mm x 20mm x 2mm – Light Oak","offer_id":54468780491098,"sku":null,"price":52.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/6516\/4890\/files\/s-l1600_fe0bf27b-4670-40f6-bc0a-f7b0ccbeff3f.webp?v=1784876870"},{"product_id":"aluminium-stair-edging-self-adhesive-trim-step-nosing-edge-laminate-wood","title":"Aluminium Stair Edging - Self Adhesive - Trim Step Nosing Edge \/ Laminate Wood","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eA Slim Finish for Laminate Stair Edges\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eExposed laminate and wooden step edges can look unfinished and may become marked through repeated contact. This aluminium stair edging creates a defined transition around the front of the step while helping cover the vulnerable edge of the flooring.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe slim profile is suitable for staircases where a compact trim is preferred over a large stair nosing. Its aluminium construction provides a clean, structured finish that can coordinate with modern laminate and wood-effect flooring.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile is supplied in a 900mm, or approximately 3ft, length. Each stair should be measured before ordering because step widths can vary between properties and even across the same staircase.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eUnderstanding the 9mm Profile Depth\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe stair edging has an approximate depth of 9mm. This measurement should be compared carefully with the thickness and position of the existing laminate or wooden flooring before installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA correctly matched profile should sit neatly around the edge without forcing the floor covering upwards or leaving a noticeable gap. Differences in underlay, flooring thickness and stair construction can affect how the edging fits.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe remaining profile dimensions are not included in the supplied information. Buyers should therefore confirm that the available shape and depth are suitable for their particular stair edge before removing the adhesive backing.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003ePeel-and-Stick Installation\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile has a self-adhesive backing, allowing it to be installed by peeling away the protective layer and pressing the trim into position. Separate screws or mechanical fixings are not identified as necessary in the supplied product details.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBefore exposing the adhesive, position the profile against the stair edge and check its alignment along the full width. Once the backing has been removed, repeated lifting or repositioning may reduce the quality of the bond.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eApply firm and even pressure across the complete profile after placement. The adhesive should make consistent contact with the prepared surface rather than bridging over gaps, loose flooring or damaged sections.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003ePreparing Laminate and Wooden Steps\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe installation surface should be smooth, clean, dry and structurally secure. Dust, grease, polish, moisture and loose particles can prevent the adhesive from bonding properly to the step.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eLaminate boards should be firmly fitted before the trim is applied. The profile should not be used to hold down loose flooring or conceal movement, damaged edges or unresolved structural problems within the staircase.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHighly textured finishes, uneven joints and waxed or contaminated surfaces may require additional preparation. Testing adhesion on a small, inconspicuous section can help assess compatibility before the full profile is installed.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eCleaning and Checking the Installed Trim\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRoutine cleaning can be completed using a soft cloth and a mild product suitable for aluminium. Loose grit should be removed before wiping because abrasive particles may scratch the visible surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHarsh solvents, metal brushes and rough scouring pads should be avoided unless their compatibility with the finish has been confirmed. Excessive water should not be allowed to collect around the profile or enter beneath the laminate edge.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe trim should be inspected periodically for lifting or movement, particularly around the ends. If the adhesive begins to release, the cause should be identified and corrected before the stair continues to receive regular use.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat is the length of this aluminium stair edging?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile is supplied in a 900mm length, which is approximately 3ft. This may suit many standard domestic stairs, but every step should be measured before ordering. Stair widths can differ slightly, and the profile may require careful trimming where the available space is narrower than 900mm.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow is the stair nosing installed?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile has an integrated self-adhesive backing. Installation involves checking the position, peeling away the protective layer and pressing the aluminium trim firmly onto a prepared stair edge. The surface must be clean, dry and smooth because dust, grease or loose material can weaken the adhesive bond.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eAre screws or separate fixings required?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied information describes the profile as self-adhesive and instructs the user to peel and stick it into position. Screws or other mechanical fixings are not listed. The trim should therefore only be applied where the adhesive backing can make secure and consistent contact with a compatible surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan it be installed over laminate flooring?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes, it is intended for laminate and wood stair edges. The laminate must be firmly secured, level and free from dust, polish and moisture before installation. The trim should not be used to hold down loose boards or hide damaged flooring because movement beneath the profile may cause the adhesive to release.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat does the approximate 9mm depth refer to?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied specifications list the profile depth as approximately 9mm. This should be compared with the flooring thickness and the shape of the intended step edge. The other profile dimensions are not confirmed, so the complete fit should be checked before the adhesive backing is removed.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan the aluminium profile be shortened?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA 900mm profile may need to be shortened for narrower stairs. Aluminium can generally be cut using suitable equipment, but the exact cutting instructions are not included in the supplied details. Measure carefully, protect the visible finish and ensure that no sharp or uneven edges remain after cutting.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes this stair edging have an anti-slip surface?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo anti-slip insert, textured tread or tested slip-resistance rating is mentioned in the supplied product information. It should therefore be treated primarily as a finishing and protective stair-edge trim rather than a certified anti-slip product. Secure fitting and routine stair safety remain important.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs the profile suitable for outdoor steps?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eExterior suitability is not confirmed in the supplied information. It is safest to use the profile on suitable indoor laminate or wooden stair edges unless the manufacturer confirms that the adhesive and aluminium finish can withstand outdoor moisture, temperature changes and weather exposure.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rubber Fit Floors","offers":[{"title":"3ft x 9mm","offer_id":54469848269146,"sku":null,"price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/6516\/4890\/files\/s-l1600_247568d5-ffb5-4de1-9325-20d55032957b.webp?v=1784887688"},{"product_id":"stair-edge-nosing-trim-900mm-x-43mm-x-28mm-1-pc-anti-non-slip-step-tread-s-1","title":"Stair Edge Nosing Trim - 900mm x 43mm x 28mm - (1 pc) Anti Non Slip Step Tread S","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eA Defined Finish for Exposed Stair Edges\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis 900mm aluminium stair nosing is designed to create a clean, defined finish across the exposed front edge of an indoor stair tread. It can cover the transition between the horizontal step and vertical riser, helping the staircase look more complete where flooring edges or unfinished joints would otherwise remain visible.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe silver finish gives the profile a neutral, modern appearance that can coordinate with different flooring colours and interior styles. Each stair should be measured individually before ordering because tread widths can differ between properties and may also vary slightly across the same staircase.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAnodised Aluminium with a Textured Tread Surface\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile is manufactured from anodised aluminium, providing a firm edging structure with a consistent silver surface. The anodised finish can help the trim withstand routine indoor handling while maintaining a cleaner appearance than untreated aluminium. Abrasive tools and harsh cleaning products should still be avoided because they may scratch or dull the visible surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe product title describes the stair nosing as anti-slip or non-slip, indicating that the walking surface includes added texture or grooves. However, no independent slip-resistance test, rating, or certification is supplied. It should therefore be treated as a textured stair-edge profile rather than a guarantee that slipping cannot occur.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eUnderstanding the 43 x 28mm Profile\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe stair edging is listed with a cross-section of approximately 43 x 28mm. These measurements are likely to describe the horizontal tread coverage and vertical face of the nosing, but the supplier does not confirm which dimension applies to each section. A profile diagram or physical measurement should be checked where an exact fit is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe stated dimensions should be compared with the completed stair edge, including any laminate, wood, tile, vinyl, carpet, or underlay already installed. A profile that is too large may extend unnecessarily across the tread, while one that is too small may leave part of the flooring edge exposed.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003ePlanning the Fixing and Installation Method\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied specifications do not confirm whether the aluminium profile is self-adhesive, pre-drilled, screw-fixed, or intended for use with a separate construction adhesive. Fixings are also not listed among the included components. The package contents and intended fitting system should therefore be checked before installation begins.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe stair edge should be stable, level, clean, and dry before the profile is positioned. Loose flooring, cracked tiles, damaged timber, or uneven surfaces should be repaired first. Place the nosing in position temporarily to check the alignment and coverage before drilling holes, applying adhesive, or making permanent alterations.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eConfirming the Pack Quantity Before Ordering\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe product title describes the item as one piece, but the item specifics state that the set contains five pieces, the pack contains five items, and the listed size is “5pc-43 x 28mm.” These details conflict, so the supplied quantity cannot be confirmed confidently from the information provided.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBefore purchasing, confirm whether the selected option includes one 900mm profile or a pack of five profiles. The listed package size and weight appear more consistent with a multi-piece set, but this should not be treated as definitive proof. Checking the quantity in advance can prevent ordering too little or paying for more stair edging than the project requires.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this listing for one stair nosing or a pack of five?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe product title refers to one piece, while the item specifics list five items in the set, five in the pack, and a size described as “5pc-43 x 28mm.” These details conflict, so the supplied quantity should be confirmed before ordering. Do not assume that either one profile or five profiles will be delivered without checking the selected listing option.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat are the dimensions of each aluminium stair profile?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEach stair nosing profile is described as approximately 900mm long with a 43 x 28mm cross-section. The listing does not explain which measurement covers the horizontal tread and which forms the vertical face. Compare a confirmed profile diagram or physical dimensions with the completed stair edge before drilling, cutting, or fitting.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the anti-slip surface guarantee that the stairs will be safe?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe product title describes the profile as anti-slip or non-slip, but no independent slip-resistance rating, test certificate, or standard is provided. The textured tread area may improve contact at the stair edge, yet overall safety still depends on secure installation, clean surfaces, good lighting, suitable footwear, and regular maintenance.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhich flooring types can be used with this stair nosing?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplier does not identify specific compatible floor coverings. An aluminium stair nosing may be suitable for firm wood, laminate, tile, vinyl, or securely finished carpet edges when the 43 x 28mm profile fits correctly. Compatibility should be checked against the flooring thickness, stair shape, and intended fixing method before installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eAre screws or other fixing accessories included?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe listing does not confirm whether screws, plugs, adhesive, or pre-drilled fixing holes are supplied. Although the profile is described as stair edging, the installation system remains unclear. Inspect the package contents first and choose a fixing method suitable for both the aluminium trim and the underlying stair construction.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan the 900mm aluminium profile be cut to a shorter length?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAnodised aluminium profiles can often be shortened using suitable metal-cutting equipment, but the supplier does not provide an approved cutting method. Measure each tread separately, protect the visible silver surface, support the profile securely, and remove sharp burrs after cutting. Professional preparation is advisable where an exact finish is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDo the listed package dimensions confirm that five pieces are included?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe package dimensions are listed as approximately 91.01 x 5.99 x 4.5cm with a total weight of 1.42kg. These figures appear to describe the packaged set rather than one individual profile, although this is not explicitly confirmed. Check the delivered quantity, dimensions, finish, and condition before starting installation.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rubber Fit Floors","offers":[{"title":"900mm x 43mm x 28mm","offer_id":54470047039834,"sku":null,"price":61.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/6516\/4890\/files\/s-l1600_fa900a90-7d48-41e2-a372-e552000f45cc.webp?v=1784888031"},{"product_id":"1pc-39-37-78-74inch-stair-edge-protector-nonslip-stair-nose-edging-self-adhesive","title":"1PC 39.37\/78.74Inch Stair Edge Protector NonSlip Stair Nose Edging Self-Adhesive","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSimple Protection for Exposed Stair Edges\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis PVC stair edge protector is designed to cover the front edge of a step, where repeated foot contact can gradually mark or wear the underlying surface. It creates a defined finish across the stair nose while adding a non-slip contact area at a frequently used part of the step.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe edging is supplied as one continuous piece and is available in two length options. The 39.37-inch version is approximately 1 metre long, while the 78.74-inch version provides approximately 2 metres of coverage. The most suitable option will depend on the width and number of stair edges being completed.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSelf-Adhesive Fitting Without Mechanical Fixings\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA self-adhesive backing allows the stair edging to be installed without visible screws. This can make it a practical option for straightforward improvement or repair projects where drilling into the step is not preferred.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe existing stair surface should be clean, dry and free from dust, grease or loose material before installation. Adhesive performance depends on the condition and compatibility of the underlying surface, so the edging should be dry-positioned and checked before the protective backing is removed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFirm, even pressure should be applied along the complete length after positioning. Particular attention should be given to both ends and the front edge, as poorly bonded sections may lift during use.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003ePVC Construction for Everyday Stair Areas\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe edging is manufactured from PVC and has a plain, solid-style finish. Its straightforward appearance allows it to be used where a functional stair-edge covering is preferred over a decorative metal profile.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePVC also makes the trim easier to handle during positioning than many rigid stair-nosing systems. However, the product should still be aligned carefully so that it follows the stair edge evenly without folds, raised sections or unnecessary tension.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied information does not specify a colour, profile width or thickness. These details should therefore be checked from the selected product option or accompanying images before ordering.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eChoosing Between the Two Length Options\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 1m option is suitable where a single stair edge measures less than one metre or where the material will be cut for a smaller application. The 2m option provides additional coverage and may be more practical when completing wider steps or cutting sections for more than one stair edge.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMeasure every step separately rather than assuming the complete staircase has identical dimensions. Small differences in width can affect how much material is required, particularly when several sections are being cut from one piece.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhen trimming is necessary, mark the required length before cutting and use equipment suitable for PVC. A straight, clean edge will help the installed protector sit more neatly against the sides of the staircase.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSurface Preparation and Final Positioning\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBefore installation, remove any loose dust and clean the stair edge using a method appropriate for the existing floor material. The surface must be allowed to dry fully before the adhesive backing is exposed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBegin at one end of the step and gradually position the protector across the edge. Avoid removing the entire backing too early, as this may make alignment more difficult. Once installed, inspect the complete length to confirm that the trim is flat and that no sections are lifting.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis product is intended as a self-adhesive stair-edge covering. It should not be treated as a repair for damaged, unstable or structurally unsafe steps, which must be addressed before any finishing trim is applied.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat lengths are available?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe stair edge protector is available in approximately 1m and 2m lengths. The listed imperial measurements are 39.37 inches and 78.74 inches respectively. Measure the required stair coverage before selecting an option, allowing for any cutting or fitting adjustments.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs one piece or a pair supplied?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied information describes this as a single-piece package. One continuous stair edge protector is therefore included. The number of steps that can be covered will depend on the selected length and the measured width of each stair.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow is the edging installed?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe protector has a self-adhesive installation method. The stair edge should be cleaned and dried before fitting. Remove the backing gradually, align the material carefully and apply firm pressure across the complete surface to support an even bond.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes installation require screws?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo screw-down installation is specified for this product. It is intended to be fitted using its self-adhesive backing. However, adhesion will depend on the material, cleanliness and condition of the existing stair surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan the PVC edging be cut to size?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePVC edging can normally be shortened using a suitable cutting tool. Measure and mark the required section before cutting, and ensure the finished edge is straight and smooth so that it sits neatly against the side of the step.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWill it stick to every type of flooring?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCompatibility with every flooring material is not confirmed. Smooth, stable and properly cleaned surfaces generally provide better conditions for self-adhesive installation. Textured, dusty, damp or damaged surfaces may reduce the quality of the bond.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs the colour shown in the specifications?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo specific colour has been provided in the supplied product information. The selected listing option and product images should be checked before purchase to confirm the colour and appearance of the edging.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this a replacement for repairing a damaged stair?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo. The protector is intended to cover and finish the stair edge. Loose flooring, damaged step surfaces or structural problems should be repaired first, as self-adhesive edging requires a stable base for proper positioning.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rubber Fit Floors","offers":[{"title":"Default Title","offer_id":54477717340506,"sku":null,"price":42.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/6516\/4890\/files\/s-l300.webp?v=1785146786"},{"product_id":"oak-design-stepfloor-0-9m-stair-nosing-step-edge-trim-for-14-to-16mm-flooring","title":"OAK design StepFloor 0.9m Stair Nosing Step Edge Trim for 14 to 16mm flooring","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFinishing Thicker Flooring at the Stair Edge\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis 0.9m stair nosing is designed for steps fitted with flooring measuring between 14mm and 16mm thick. It creates a defined transition where the flooring reaches the front of the step, helping the completed staircase look more consistent and properly finished.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe oak-design surface allows the profile to coordinate with many wood-effect floors, while the underlying aluminium construction provides a structured edge. It is suitable for renovation work as well as new flooring installations where a compatible stair profile is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eDesigned Around a 14–16mm Flooring Depth\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFlooring thickness is one of the most important measurements when selecting a stair nosing. This profile is intended for finished flooring between 14mm and 16mm, making it more appropriate for thicker boards than profiles designed for standard 8mm or 10mm laminate.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe full installed depth should be checked before ordering. Flooring boards, attached backing, adhesive and underlay can all affect the final height at the edge of the step. Measuring the completed build-up helps confirm whether the flooring will sit correctly within the profile.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA profile that is too shallow may not accommodate the flooring properly, while an oversized profile can leave an untidy gap. Accurate measurement supports a cleaner transition and more consistent positioning across the staircase.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eOak Appearance with an Aluminium Core\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe visible surface has an oak-style design intended to complement wood and wood-effect flooring. The trim itself is made from aluminium rather than timber, allowing it to retain a clearly formed shape around the stair edge.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis combination is useful where a plain metal finish would contrast too strongly with the surrounding flooring. The oak appearance creates a more coordinated result while the aluminium base maintains the modern, defined look of a manufactured stair profile.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOak-effect flooring is available in many shades and grain patterns, so an exact colour match should not be assumed. Compare the profile with the installed flooring and surrounding interior before completing the installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003ePreparing the Step for Screw-Down Installation\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe stair nosing is designed to be secured using a screw-down installation method. The step must provide a stable base for mechanical fixing, and the profile should sit flat against the flooring and stair edge before any holes are marked.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDust, loose flooring, damaged material or uneven sections should be corrected before installation. Fixing the profile over an unstable surface may prevent it from sitting evenly and can affect the final appearance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePlace the nosing in its intended position and check the alignment from both ends of the step. Once the location has been confirmed, use fixings that are appropriate for the construction of the staircase. Fixings are not listed as included in the supplied product information.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eMeasuring and Adjusting the 0.9m Profile\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied profile measures 0.9m, or 900mm, in length. Each stair should be measured individually because widths may vary slightly across the same staircase, particularly in older properties or renovated interiors.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhere the profile needs to be shortened, it should be marked carefully and cut using equipment suitable for aluminium. Protect the oak-design surface during cutting and smooth any sharp or uneven edges before fitting.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDry fitting the profile before drilling allows the length, flooring depth and alignment to be checked together. This reduces the risk of positioning the nosing too far forward or leaving an inconsistent gap along the step.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhere This Stair Nosing Can Be Used\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile is suitable for indoor steps and staircases fitted with compatible 14mm to 16mm flooring. Its modern oak appearance makes it particularly relevant for hallways, landings and residential staircase projects where wood-effect flooring continues towards the steps.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOne stair nosing is supplied in each pack. A separate profile will normally be needed for every stair edge, so the total quantity should be calculated according to the number of steps being completed.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat flooring thickness is this stair nosing designed for?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile is intended for flooring between 14mm and 16mm thick. Measure the complete fitted flooring depth before ordering because attached backing, underlay or adhesive may increase the final height at the stair edge.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs the stair nosing made from oak wood?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo. The stair nosing is manufactured from aluminium and has an oak-design finish. It provides the appearance of a wood-effect profile while retaining the formed structure of an aluminium stair-edge trim.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow long is the profile?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile measures 0.9m, which is equivalent to 900mm. Measure each step before purchase because staircase widths are not always identical, even when the steps appear to have the same dimensions.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow is the stair nosing installed?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt uses a screw-down installation method. The profile should be positioned on a stable, level stair edge before the fixing points are marked. Suitable fixings should be selected according to the material and construction of the staircase.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eAre installation screws supplied?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied information does not confirm that screws are included. Suitable fixings may therefore need to be purchased separately based on whether the underlying step is made from timber, concrete or another material.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan the aluminium nosing be cut to a shorter length?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes, the profile can be shortened using equipment suitable for cutting aluminium. Measure and mark the required length carefully, protect the decorative surface and smooth the cut edge before installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWill the oak finish match all wood-effect floors?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAn exact match cannot be guaranteed because flooring manufacturers use different oak shades, textures and grain patterns. The profile should be compared with the installed flooring before it is permanently secured.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow many pieces are included in one pack?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOne 0.9m stair nosing is included. Most staircase installations require one profile for each step, so count the stair edges that need finishing before calculating the total quantity required.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rubber Fit Floors","offers":[{"title":"0.9m x 16mm","offer_id":54477726712154,"sku":null,"price":102.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/6516\/4890\/files\/s-l960_64246c89-03a6-441b-87c1-e19bcab158a7.webp?v=1785147267"},{"product_id":"stair-nosing-edge-trim-aluminium-step-stair-nose-for-wood-carpet-grooved-finish","title":"Stair Nosing Edge Trim Aluminium Step Stair Nose for Wood Carpet Grooved Finish","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eA Neat Finish for Exposed Stair Edges\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis aluminium stair nosing is designed to cover and finish the exposed front edge of a stair tread. It creates a more defined transition between the horizontal tread and the vertical stair face while helping protect the underlying edge from everyday contact and wear.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 900mm length is suitable for many standard domestic stair widths. Its modern matt appearance works with a range of wood and carpet finishes without creating an overly reflective or decorative edge.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow the Grooved Surface Supports Foot Placement\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe upper surface features a series of grooves that add texture to the area where the foot meets the stair edge. This provides a more noticeable surface than a completely smooth aluminium profile and helps users identify the front of each step underfoot.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe grooved finish should not be treated as a certified anti-slip system unless separate test information is available. Its main purpose is to provide a practical, textured surface while giving the stair edge a clean and consistent appearance.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWide Aluminium Coverage for a Defined Edge\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWith a listed overall width of 38.5mm and height of 19.5mm, the profile provides substantial coverage across the stair edge. This can be useful where the end of a wood or carpet finish requires a clearly defined trim rather than being left exposed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAluminium provides a rigid structure that holds its shape during normal stair use. Unlike flexible edging, it creates a firm border around the tread and offers a contemporary finish for residential stairs, hallways and similar interior areas.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003ePreparing the Stair Before Installation\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe stair edge should be clean, level and free from loose material before fitting. Careful measuring is important because the profile must sit evenly across the tread without obstructing normal foot placement or creating an uneven transition.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFixing screws are included with the trim. The installer should still confirm that the supplied fixings are appropriate for the underlying stair material. Additional plugs or alternative screws may be required depending on whether the nosing is being fitted over timber, board, masonry or another substrate.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eChecking the Profile Measurements Before Ordering\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied product information lists an overall width of 38.5mm and an overall height of 19.5mm. It also describes the model as a wide grooved 35mm x 15mm stair profile. These figures may refer to different parts of the trim rather than the same overall measurement.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCheck the intended installation area carefully before ordering, particularly where the carpet, wood covering or stair edge has limited clearance. Confirming the tread depth, front drop and required length will help determine whether this profile provides the correct coverage.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this stair nosing suitable for both wood and carpet?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile is described for use with wood and carpet stair finishes. Suitability will depend on the thickness of the floor covering and the dimensions of the exposed stair edge. Measure the tread, front drop and finished covering carefully to ensure the profile sits securely without creating an uncomfortable raised transition.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the grooved surface make the stair nosing anti-slip?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe grooves add texture to the aluminium surface and make the front of the tread more noticeable underfoot. However, no tested slip-resistance rating has been provided in the supplied information. It should therefore be described as a grooved or textured profile rather than as a certified anti-slip stair nosing.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eAre the installation screws included?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes, fixing screws are supplied with the stair nosing. Before installation, check whether they are suitable for the material beneath the trim. Timber stairs may require a different fixing method from masonry or composite steps, and suitable plugs may be needed where the screws cannot be fixed directly into the substrate.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan the 900mm aluminium profile be shortened?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAluminium stair profiles can generally be shortened using an appropriate metal-cutting tool and a suitable blade. The trim should be measured and marked accurately before cutting. Any cut edge should be smoothed carefully to remove sharp burrs and create a clean finish against the side of the staircase.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat do the 38.5mm x 19.5mm and 35mm x 15mm measurements mean?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe item data lists an overall width of 38.5mm and height of 19.5mm, while the model description refers to a 35mm x 15mm profile. These measurements may relate to separate external and fitting sections. Because no technical drawing has been supplied, compare both sets of measurements with the intended stair edge before purchase.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs the matt finish suitable for modern interiors?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe matt aluminium finish provides a restrained appearance with less reflection than a polished metal surface. It can complement contemporary wood, neutral carpet and modern hallway finishes. The final appearance will depend on the surrounding flooring, stair colour and how evenly the profile is cut and installed.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rubber Fit Floors","offers":[{"title":"900mm x 19.5mm x 38.5mm","offer_id":54478700577114,"sku":null,"price":32.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/6516\/4890\/files\/s-l1600_b45c178d-a98f-4588-bef8-7ad61297ae11.webp?v=1785151707"},{"product_id":"stair-nosing-matt-silver-aluminium-25x10mm-self-adhesive-retro-fit-2-7m-grooved","title":"Stair Nosing Matt Silver Aluminium 25x10mm Self-Adhesive Retro-Fit 2.7m Grooved","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eA Practical Upgrade for Finished Stair Edges\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis aluminium stair nosing is designed for retro-fit installation, allowing an existing staircase to be finished without removing the current floor covering. The 25mm x 10mm profile creates a defined border around the front of the tread while helping shield exposed flooring edges from repeated contact.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIts matt silver finish provides a clean, understated appearance that works with modern and neutral interiors. The 2.7m length can be measured and cut into individual sections, making it suitable for completing several steps depending on the width of the staircase.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eGrooved Aluminium Surface for a More Defined Step\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe upper face includes a grooved texture that makes the stair edge easier to recognise underfoot than a completely smooth metal trim. These grooves also add visual detail to the profile without making the finish appear overly decorative.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo tested slip-resistance rating has been supplied, so the product should not be described as a certified anti-slip system. The grooves provide surface texture, while safe stair use will still depend on correct installation, suitable footwear and the condition of the surrounding floor covering.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSelf-Adhesive Installation Without Visible Fixings\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAn integrated adhesive backing allows the trim to be installed without drilling holes or using exposed screws. This can provide a cleaner finish and may simplify fitting on completed stairs where mechanical fixings would be inconvenient.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe bonding surface must be clean, dry, smooth and free from dust, grease or loose material. Self-adhesive products rely heavily on surface preparation, so uneven, damp or contaminated stairs may reduce adhesion. The profile should be aligned carefully before pressure is applied because repositioning may weaken the bond.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSuitable Flooring and Profile Compatibility\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe nosing is described as compatible with vinyl, ceramic and laminate flooring. Its 25mm-wide upper section and 10mm front drop should be checked against the exact stair shape and the thickness of the existing floor finish before ordering.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA retro-fit profile sits over the completed stair edge rather than beneath the flooring. It is therefore important to confirm that the nosing will rest evenly across the tread without rocking, obstructing nearby doors or creating an uncomfortable raised point at the front of the step.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eCutting, Positioning and Ongoing Care\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 2.7m aluminium strip can normally be shortened using an appropriate metal-cutting tool and a suitable blade. Each stair should be measured separately because widths can vary across the same staircase. After cutting, sharp edges and metal burrs should be removed before the profile is installed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRoutine care can be carried out with a soft cloth or a mild cleaning solution suitable for aluminium. Harsh abrasives may mark the matt finish, while excessive water around the adhesive edge should be avoided. The trim should be checked periodically to ensure it remains fully bonded and level.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this stair nosing suitable for an existing staircase?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. It is designed as a retro-fit profile, which means it can be installed over a completed stair edge rather than being fitted beneath new flooring. The tread must still provide a smooth, level bonding area, and the 25mm x 10mm dimensions should be checked carefully to ensure the trim fits the existing stair construction.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the stair nosing require screws or drilling?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo mechanical fixings are described as necessary because the profile includes a self-adhesive backing. The final strength of the installation will depend on careful surface preparation. Dust, grease, moisture, loose flooring or an uneven tread can prevent the adhesive from forming a secure and consistent bond.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan it be installed over laminate flooring?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe product is listed as compatible with laminate, vinyl and ceramic surfaces. Before installation, check that the flooring is firmly attached and that the nosing can sit flat across the stair edge. An unstable or flexible floor covering may move beneath the aluminium trim and place additional strain on the adhesive layer.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs the grooved aluminium surface certified as anti-slip?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo certified slip-resistance test or rating is included in the available product information. The grooves create a textured surface and make the front edge of the stair more noticeable, but they should not be presented as a guaranteed anti-slip feature. Overall safety depends on fitting quality and the surrounding conditions.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow many stair steps can be covered by one 2.7m strip?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe number of steps depends on the width of each staircase. For example, narrower domestic stairs may allow several sections to be cut from the 2.7m length, while wider steps will use more material. Measure every tread individually and include a small allowance for cutting before calculating the required quantity.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan the aluminium profile be cut at home?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAluminium can generally be shortened using an appropriate fine-tooth metal saw or another tool intended for cutting aluminium profiles. Accurate marking is important to avoid wasting material. The cut end should be filed smooth so that no sharp edges remain and the trim fits neatly against the side of the staircase.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWill the self-adhesive backing work on ceramic tiles?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt may bond to ceramic flooring when the tile is smooth, secure, clean and completely dry. Textured tiles, uneven grout lines or residues from cleaning products can reduce the available contact area. The surface should be prepared thoroughly, and the profile should be test-positioned before the protective adhesive layer is removed.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rubber Fit Floors","offers":[{"title":"25 x 10mm x 2.7m","offer_id":54478756348250,"sku":null,"price":120.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/6516\/4890\/files\/s-l1600_6fede100-e85d-4612-beb6-bf311c0f31c0.webp?v=1785152087"},{"product_id":"solid-oak-nosing-stair-tread-l-nose-20mm-x-20mm-corner-angle-bead-0-9m","title":"Solid Oak Nosing | Stair Tread L-Nose | 20mm x 20mm | Corner Angle Bead | 0.9m","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSolid Oak Protection for Exposed Stair Edges\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis solid oak stair nosing provides a practical way to finish the front edge of a timber stair tread. The hardwood profile covers the exposed corner, helping create a more complete transition between the horizontal tread and the vertical face of the step. Its natural timber construction makes it particularly suitable for staircases where a metal or plastic trim would look out of place.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow the L-Shaped Profile Fits the Tread\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe right-angle design is formed to sit across two adjoining surfaces. One 20mm section rests over the top of the stair tread, while the second 20mm section covers the front edge. This L-shaped arrangement creates a defined corner and can help conceal minor imperfections where two timber surfaces meet, provided the underlying edge is straight and properly prepared.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eUnderstanding the 20mm x 20mm Dimensions\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBoth sides of the profile measure 20mm, producing a compact corner trim rather than a wide stair covering. These dimensions should be compared with the available tread space and front drop before ordering. The profile is intended to finish a defined edge, but it may not provide enough coverage where the existing staircase has extensive damage, a thick floor covering or an unusually rounded front.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eCutting the 0.9m Oak Profile to Size\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 0.9m length is suitable for many standard domestic stair widths and can be shortened when a narrower section is required. Every tread should be measured individually because stair widths can vary slightly, even within the same staircase. A fine-tooth saw suitable for hardwood will normally produce a cleaner cut, while light sanding can be used to smooth the cut end before installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003ePreparing, Fitting and Finishing the Timber\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe available product information does not specify an installation method or confirm whether fixings are included. The appropriate adhesive, pins or screws will therefore depend on the stair construction and the desired appearance. Both bonding surfaces should be dry, level and free from dust. As no coating is stated, any oil, stain, lacquer or protective finish should be tested on a small area first to confirm the preferred colour and appearance.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this profile made from solid oak?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied product details identify the material as wood, the wood species as oak and the timber classification as hardwood. It is therefore presented as a solid oak profile rather than an oak-effect or laminated trim. Natural variations in grain, shade and pattern should be expected because timber does not have the completely uniform appearance of manufactured plastic or metal edging.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat does a 20mm x 20mm L-nose measurement mean?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe measurement refers to the two sides forming the right-angle profile. One section extends approximately 20mm across the upper surface, while the other drops approximately 20mm down the front edge. These dimensions should be checked against the actual staircase because the trim must sit evenly across both surfaces without interfering with normal foot placement.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan the 0.9m length be shortened?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes, solid oak can generally be cut to the required width using a fine-tooth saw intended for hardwood. The profile should be supported securely during cutting to reduce movement and minimise splintering. Measure the individual tread before making each cut, then smooth the exposed end carefully with fine abrasive paper to create a neat edge.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eAre adhesive or fixing screws supplied?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe available specifications do not state that adhesive, screws, pins or any other installation materials are included. Suitable fixings will need to be selected according to the underlying stair material and the preferred finish. A timber staircase may accept pins or screws, while some installations may use a suitable construction adhesive to avoid visible fixings.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan this oak nosing be stained or varnished?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied information does not confirm whether the timber is unfinished or already treated. Before applying any stain, oil, varnish or lacquer, inspect the surface and test the chosen product on an offcut or concealed area. Oak can change colour noticeably when treated, so testing helps confirm the final shade and compatibility before the entire profile is finished.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this suitable for covering a badly damaged stair edge?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 20mm x 20mm profile can cover a defined corner and may conceal small marks or minor irregularities. It should not be relied upon to repair loose, broken or structurally damaged timber. Any unstable area should be repaired and levelled first, as the stair nosing requires firm, even support across both sides to achieve a secure and visually consistent installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan it be used for purposes other than stair treads?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIts right-angle shape may also suit selected interior woodworking applications where a solid oak corner bead is required. Compatibility will depend on the dimensions, surface condition and intended fixing method. The primary described use remains stair tread edging, so measurements and installation requirements should be assessed carefully before using it for another project.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rubber Fit Floors","offers":[{"title":"0.9m - Untreated - 20mm x 20mm","offer_id":54478797341018,"sku":null,"price":22.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/6516\/4890\/files\/s-l1600_a1aa0672-5e46-4a78-b0b2-96df0f530214.webp?v=1785152378"},{"product_id":"solid-oak-nosing-stair-tread-l-nose-25mm-x-25mm-corner-angle-bead-0-9m","title":"Solid Oak Nosing | Stair Tread L-Nose | 25mm x 25mm | Corner Angle Bead | 0.9m","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003ePlaned Solid Oak Finish for Exposed Stair Edges\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis solid oak stair nosing provides a natural timber finish for the exposed front edge of a stair tread. The L-shaped profile covers the upper corner and front face, creating a more complete transition between the horizontal tread and the vertical section of the step.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe oak is described as planed, giving the visible surfaces a smoother and more consistent finish than rough-sawn timber. Natural differences in grain, tone and pattern should still be expected because each piece of solid wood has its own appearance.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow the 25mm x 25mm L-Nose Profile Fits\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile has two 25mm sections positioned at a right angle. One side sits across the upper surface of the tread, while the second section covers the front edge. This design can help conceal the joint between two surfaces and provide a defined border around the step.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBoth dimensions should be checked against the existing staircase before ordering. The profile must sit evenly across the corner without rocking, leaving unsupported gaps or creating an uncomfortable obstruction near the front of the tread.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eCutting the 0.9m Length for Individual Steps\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 0.9m length is suitable for many domestic stair widths and can be shortened where a narrower section is required. Each tread should be measured separately because small width differences are common across the same staircase.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA fine-tooth saw suitable for hardwood will usually provide a cleaner cut with less risk of splintering. The profile should be supported securely while cutting, and the exposed end can be lightly sanded to remove rough fibres and achieve a neater side finish.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSelecting a Suitable Installation Method\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied information does not confirm whether adhesive, screws, pins or other fixings are included. The most appropriate installation method will depend on the stair material, the condition of the tread and whether visible fixings are acceptable.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBoth sides of the stair corner should be firm, dry, clean and level before installation. Loose timber, damaged flooring or uneven edges should be repaired first because the oak profile needs consistent support across its full length to remain secure.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFinishing and Maintaining Natural Oak\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo stain, oil, varnish or other surface coating is specified in the product details. The timber should therefore be inspected before applying a decorative or protective finish. Testing the chosen treatment on a small concealed area or offcut will help confirm how it changes the colour and grain.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRoutine care should use methods suitable for interior oak. Excess water should be avoided, and harsh abrasive products may mark the planed surface. Periodic inspection is also recommended to identify movement, loosened fixings or damage around the tread edge.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this stair nosing made from solid oak?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe product title and supplied specifications identify the profile as solid oak, with oak also listed as the wood species and timber type. As a natural hardwood product, variations in grain direction, shade and visible markings are normal. These differences are part of the timber rather than defects associated with a printed or artificial wood-effect finish.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat does the 25mm x 25mm measurement represent?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe measurement refers to the two sides that form the right-angle profile. One section extends approximately 25mm across the top of the stair tread, while the second section covers approximately 25mm of the front face. Both areas should be measured before purchase to ensure the trim provides enough coverage and sits flat against the stair edge.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan the 0.9m oak profile be shortened?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes, solid oak can generally be cut to match the width of an individual tread. A fine-tooth saw designed for hardwood can help reduce rough edges and splintering. Each stair should be measured separately before cutting, and the profile should be supported firmly so the cut remains straight and the finished section fits neatly between the staircase sides.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eAre installation fixings included with the nosing?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe available product information does not state that screws, pins, adhesive or other fixing materials are supplied. A suitable method will need to be selected for the underlying staircase. The chosen fixing should hold both sides of the L-shaped profile securely without splitting the oak or leaving unsupported areas beneath the trim.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan the oak nosing be stained, oiled or varnished?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe specifications do not confirm whether the oak has already received a protective coating. Inspect the surface before applying any treatment and test the chosen product on a concealed area where possible. Oils and stains can deepen the natural oak colour, while varnish may alter the sheen, so testing helps confirm the final appearance before full application.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this profile suitable for repairing a damaged stair edge?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe nosing can cover a defined corner and may hide small surface marks or minor imperfections. It should not be used as the only repair for loose, cracked or structurally damaged timber. The underlying tread and front face must first be made stable and level so the profile has adequate support and can be fixed securely across both surfaces.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan this L-shaped oak trim be used for other woodworking projects?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 25mm x 25mm right-angle profile may suit selected interior joinery and corner-finishing applications where a solid oak bead is required. Suitability will depend on the required coverage, fixing method and surrounding materials. The main intended purpose remains stair tread edging, so alternative uses should be assessed individually before cutting or finishing the timber.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rubber Fit Floors","offers":[{"title":"0.9m - Untreated - 25mm x 25mm","offer_id":54478831354202,"sku":null,"price":32.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/6516\/4890\/files\/s-l1600_f232226a-2709-4216-8a75-dfe02e083c16.webp?v=1785152650"},{"product_id":"solid-oak-cushion-corner-l-bead-i-0-9m-i-edge-nosing-i-20-25-30-40-45mm","title":"Solid Oak Cushion Corner L Bead I 0.9m I Edge Nosing I 20\/25\/30\/40\/45mm","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eNatural Oak Finishing for Exposed Corners\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis solid oak cushion corner L bead provides a natural timber finish where two surfaces meet at an exposed right angle. Its L-shaped construction covers both sides of the corner, helping create a cleaner transition while protecting the underlying edge from everyday knocks, scuffs and contact.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe oak construction makes the profile particularly suitable for interiors where plastic or metal edging would not complement the surrounding timber. Natural grain, colour and markings will vary between pieces because solid wood does not have the completely uniform appearance of a printed or manufactured finish.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eChoosing the Correct Profile Size\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile is available in 20mm, 25mm, 30mm, 40mm and 45mm size options. A smaller option may suit compact corners and narrow trim work, while a wider profile provides more coverage across each side of the underlying edge.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied information does not include a technical drawing showing whether the selected measurement applies equally to both sides of the L-shaped profile. Measure the top and front surfaces carefully and compare them with the selected option before ordering, especially where the bead must fit around a stair tread or existing timber feature.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSuitable Uses Around Stairs and Interior Woodwork\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe cushion corner profile can be used as stair edge nosing, a corner angle bead or a finishing trim for selected joinery projects. It may be suitable for covering exposed timber edges, defining the front of a tread or creating a more complete appearance where two wooden surfaces meet.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe term “cushion corner” describes the profile style, but the exact radius and curvature of the outer edge are not stated in the available specifications. Where a precise rounded shape is required, the profile should be checked against the intended project before cutting or permanently fixing it.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eMeasuring and Cutting the 900mm Length\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 900mm length is suitable for many domestic stair widths and smaller interior finishing projects. It can be shortened where the installation requires a narrower piece, although each stair or corner should be measured separately because dimensions can vary across the same property.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA fine-tooth saw intended for hardwood will generally produce a cleaner result with less risk of tearing the oak fibres. The profile should be supported securely while cutting, and any roughness or sharp fibres at the cut end can be removed carefully with fine abrasive paper.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFixing, Finishing and Maintaining the Oak\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied details do not confirm that adhesive, screws, pins or other installation materials are included. The fixing method should therefore be selected according to the underlying surface, the intended use and whether visible fixings are acceptable. Both sides of the corner must be clean, dry, stable and level before fitting.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo oil, stain, lacquer or varnish is specified. Any decorative or protective treatment should be tested on a concealed section or offcut first because oak can darken or change tone after finishing. Routine care should avoid excessive moisture and harsh abrasives that could affect the timber surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this corner bead made from solid oak?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe product title and supplied specifications identify the profile as solid oak, with oak also stated as the wood species and timber type. As a natural hardwood product, each length may display slightly different grain patterns, markings and colour tones. These natural variations should be expected and can help the trim blend with other genuine timber features.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhich size should I choose for my project?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eChoose a size that provides enough coverage across both sides of the corner without extending too far onto the surrounding surfaces. Measure the upper and front faces of the edge before ordering. Because the supplied information does not include a detailed cross-section drawing, avoid assuming that every listed measurement refers to a specific internal or external dimension.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan this profile be used as stair nosing?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt is described as an edge nosing and may be used to finish selected stair tread corners where its dimensions and shape match the staircase. The underlying tread must be stable and level, and the profile should not reduce usable tread space or create an awkward raised edge. Confirm the selected size and fixing method before installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat does cushion corner mean?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCushion corner generally refers to the outer shape or softened appearance of the edge rather than a completely sharp square corner. However, the exact radius and degree of rounding are not supplied in the product information. Where the precise shape is important, particularly for matching existing joinery, it should be checked before the material is cut.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan the 0.9m oak bead be cut shorter?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes, solid oak profiles can generally be shortened using a fine-tooth saw suitable for hardwood. Measure and mark the required length carefully, then support the bead securely during cutting to reduce movement and splintering. The cut end can be sanded lightly to remove rough fibres and create a cleaner finish against the side of the installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eAre screws or adhesive included?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe available product details do not state that screws, pins, adhesive or other installation materials are supplied. A suitable fixing method will need to be selected according to the substrate and application. The chosen fixing should secure both sides of the L profile without splitting the oak or leaving unsupported gaps underneath it.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan the solid oak be stained or varnished?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied information does not confirm whether the timber has already received a surface treatment. Inspect the profile before applying stain, oil, wax, lacquer or varnish, and test the chosen finish on a concealed area first. Oak can become noticeably darker or warmer after treatment, so testing helps confirm the final appearance.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rubber Fit Floors","offers":[{"title":"0.9m - Untreated - 20mm x 20mm","offer_id":54478888796506,"sku":null,"price":22.99,"currency_code":"GBP","in_stock":true},{"title":"0.9m - Untreated - 25mm x 25mm","offer_id":54478888829274,"sku":null,"price":32.99,"currency_code":"GBP","in_stock":true},{"title":"0.9m - Untreated - 30mm x 30mm","offer_id":54478888862042,"sku":null,"price":39.99,"currency_code":"GBP","in_stock":true},{"title":"0.9m - Untreated - 40mm x 40mm","offer_id":54478888894810,"sku":null,"price":48.99,"currency_code":"GBP","in_stock":true},{"title":"0.9m - Untreated - 45mm x 45mm","offer_id":54478888927578,"sku":null,"price":57.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/6516\/4890\/files\/s-l1600_d554d275-332e-4be6-ab46-27549568907a.webp?v=1785152912"},{"product_id":"uni-oak-lacquered-wood-floor-stair-nose-2-7-metre-length","title":"UNI Oak Lacquered Wood Floor Stair Nose 2.7 Metre Length","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFinished Oak Profile for Wood Flooring Stairs\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis 2.7m oak stair nose is designed to create a more complete finish where wood flooring meets the exposed front edge of a stair tread. It provides a defined transition around the step and helps cover the unfinished edge that may otherwise remain visible after the flooring has been installed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe natural appearance of oak makes the profile suitable for interiors where the stair trim needs to complement timber flooring rather than contrast with it. As oak is a natural material, variations in grain pattern and shade may be visible along the length.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat the Lacquered Surface Provides\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile is supplied with a lacquered finish, so the visible oak surface has already received a coating. This can reduce the preparation required compared with completely unfinished timber and gives the nosing a more complete appearance before installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe exact sheen, colour tone and lacquer specification are not stated in the supplied information. The profile should therefore be compared with the existing floor in natural and artificial light, particularly where a close colour match is important.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eMaking Practical Use of the 2.7m Length\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA total length of 2.7 metres provides enough material to cut several stair-width sections in many domestic installations. The actual number of steps covered will depend on the width of each tread and the amount of material lost during measuring and cutting.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEach step should be measured separately because staircase widths are not always identical from top to bottom. Planning the cuts before shortening the profile can help reduce waste and make better use of the available length.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eChecking Compatibility with the Stair Edge\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied details do not state the width, height or cross-sectional shape of the stair nose. These dimensions are important because the profile must fit the flooring thickness and sit correctly around the front of the tread.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBefore ordering, check the depth of the installed wood flooring, the shape of the stair edge and the available fitting area. A technical drawing or confirmed profile measurement may be needed where the staircase has a rounded edge, an overhang or limited clearance.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eCutting, Installation and Ongoing Care\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOak can generally be cut using a fine-tooth saw suitable for timber. The profile should be measured accurately and supported securely while cutting to reduce splintering. Any rough fibres at the cut ends can be smoothed carefully before fitting.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo fixing method or included installation materials are confirmed in the supplied details. The appropriate adhesive or mechanical fixing will depend on the profile design and the stair substrate. Once installed, the lacquered surface should be cleaned with products suitable for coated wood, avoiding excessive moisture and abrasive cleaners.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this stair nose made from oak?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied product information lists the material as oak. It has therefore been described as an oak stair nosing rather than as an oak-effect profile. The available details do not state whether the construction is one solid piece, engineered timber or another oak-based format, so no more specific construction claim has been made.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs the oak stair nosing already finished?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes, the product title identifies the oak as lacquered, which indicates that a surface coating has already been applied. However, the lacquer type, sheen level and exact colour are not specified. It is sensible to compare the profile with the intended wood floor before installation because lacquer can make oak appear darker or warmer.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow many steps can be covered with a 2.7m length?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe number of steps depends entirely on the width of the staircase. A 2.7m profile may provide several individual sections after cutting, but allowances should be made for trimming and possible errors. Measure each tread separately, add the required widths together and compare that total with the full profile length before cutting.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat are the width and height of the stair nose?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplier information confirms the 2.7m length but does not provide the width, height or cross-sectional dimensions. These measurements are essential for confirming compatibility with the flooring thickness and stair edge. They should be checked before purchase where the fit must match an existing installation precisely.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eAre adhesive or screws supplied?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied specifications do not confirm that adhesive, screws or any other installation materials are included. They also do not identify the required fixing method. The correct installation approach will depend on the shape of the profile, the type of staircase and the condition of the underlying surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan the profile be cut to match individual steps?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOak profiles can generally be shortened using an appropriate fine-tooth timber saw. Each section should be measured and marked carefully before cutting, and the profile should be supported to reduce movement and splintering. The cut end can be smoothed lightly so it sits neatly against the side of the staircase.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan additional stain or lacquer be applied?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile is already described as lacquered, so an additional coating may not bond correctly without suitable surface preparation. Applying another stain, oil or lacquer could also change the appearance. Check compatibility with the existing coating and test any intended treatment on an offcut or concealed area before treating the full profile.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Rubber Fit Floors","offers":[{"title":"2.7 M","offer_id":54478932148570,"sku":null,"price":172.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/6516\/4890\/files\/s-l960_e368a4ca-40b9-4510-86ed-eef6a68c557c.webp?v=1785153251"},{"product_id":"solid-oak-nosing-stair-tread-l-nose-30mm-x-30mm-corner-angle-bead-0-9m","title":"Solid Oak Nosing | Stair Tread L-Nose | 30mm x 30mm | Corner Angle Bead | 0.9m","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWider Coverage for Exposed Stair Corners\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis solid oak stair nosing is designed to finish the exposed front corner of a timber stair tread. Its L-shaped construction covers both the upper tread surface and the vertical front edge, creating a cleaner transition where the two sections meet.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 30mm profile provides more coverage than narrower 20mm or 25mm trims. This can make it useful where a broader section is required to conceal the underlying joint, protect the edge or create a more noticeable timber border around the step.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eUnderstanding the 30mm x 30mm Profile\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile consists of two sections positioned at a right angle, with each side measuring approximately 30mm. One section sits across the top of the tread, while the second section extends down the front face of the stair.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBoth surfaces should be measured before ordering. The profile needs firm and even support across its full width, and it should not create an excessive raised area or reduce the usable depth of the stair tread.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eNatural Hardwood Appearance and Variation\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOak is a hardwood valued for its visible grain and natural character. Individual profiles may show differences in shade, grain direction and small natural markings, so the appearance may not be completely uniform along the full length or between separate pieces.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThese natural variations can help the nosing blend with genuine timber stairs and other interior woodwork. Where a close match is required, the profile should be compared with the surrounding timber before any permanent surface treatment is applied.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eMeasuring and Cutting the 0.9m Length\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 0.9m profile is suitable for many domestic stair widths and can be shortened when a narrower section is needed. Every step should be measured separately because tread widths may vary slightly across the same staircase.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA fine-tooth saw intended for hardwood can help produce a cleaner cut with less risk of splintering. The profile should be supported securely while cutting, and the exposed end can be sanded lightly to remove rough fibres and improve the finished appearance.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eInstallation and Surface Finishing\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied product details do not confirm whether adhesive, screws, pins or other installation materials are included. The fixing method should therefore be selected according to the construction of the staircase and whether visible fixings are acceptable.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe stair edge should be dry, stable, clean and level before fitting. No oil, stain, lacquer or varnish is specified, so any intended treatment should first be tested on an offcut or concealed area to confirm the resulting colour and finish.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this stair nosing made from solid oak?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe product title identifies the profile as solid oak, while the supplied specifications list oak as both the wood species and timber type. As a natural hardwood product, it may display differences in grain, tone and markings. These variations are expected and help distinguish genuine timber from a printed wood-effect trim.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat does the 30mm x 30mm measurement mean?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe measurement refers to the two sides forming the right-angle profile. One side extends approximately 30mm across the upper tread surface, while the other covers approximately 30mm of the front face. Both areas should be measured carefully to confirm that the profile provides suitable coverage without obstructing normal stair use.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow does this differ from a smaller L-nose profile?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA 30mm x 30mm stair nosing covers a wider area on both sides of the corner than narrower alternatives. This may make it more suitable where additional coverage is required around the edge. The wider profile also needs more clear space, so it may not be appropriate where the tread surface or front drop is limited.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan the 0.9m profile be cut shorter?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes, oak profiles can generally be shortened using a fine-tooth saw suitable for hardwood. The stair should be measured before each cut because individual tread widths can differ. Supporting the profile firmly during cutting helps reduce movement, while light sanding can remove rough fibres from the exposed end.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eAre adhesive or screws supplied?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe available information does not state that adhesive, screws, pins or other fixing materials are included. The most suitable method will depend on the underlying stair material and the intended appearance. Any fixing should hold both sides of the L-shaped profile securely without splitting the oak or leaving gaps beneath it.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan the oak nosing be stained or varnished?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo surface treatment is confirmed in the supplied specifications. Before applying stain, oil, wax, varnish or lacquer, inspect the timber and test the selected finish on a concealed area where possible. Oak can change noticeably in colour after treatment, so testing helps confirm whether it will match the surrounding staircase.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan this profile cover a damaged stair edge?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 30mm x 30mm profile may conceal minor marks, uneven joints or small cosmetic imperfections. It should not be used as a substitute for repairing loose, cracked or structurally damaged timber. The underlying tread and front face must be stable and level so the nosing has firm support after installation.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rubber Fit Floors","offers":[{"title":"0.9m - Untreated - 30mm x 30mm","offer_id":54478972059994,"sku":null,"price":39.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/6516\/4890\/files\/s-l1600_c5131298-0366-48d3-aeda-25a7af785647.webp?v=1785153479"},{"product_id":"solid-hardwood-oak-universal-stair-nosing-900mm-60mm-wide-x-10","title":"Solid Hardwood Oak Universal Stair Nosing 900MM 60mm Wide x 10","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSolid Oak Detail for a Natural Stair Finish\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis universal stair nosing is made from solid hardwood oak, providing a natural timber finish for exposed stair edges. The visible wood grain gives each piece an individual appearance, making the nosing suitable for projects where a coordinated wooden finish is preferred over metal, PVC or synthetic edging.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOak is particularly suited to interiors where the staircase forms part of the overall design rather than serving only a functional purpose. Its natural colour can complement wooden stairs, flooring and other timber features, although the grain and shade may vary slightly between pieces because oak is a natural material.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eUnderstanding the 60mm Nosing Width\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEach stair nosing measures 60mm wide. This measurement should be checked against the available surface area on the stair edge before ordering, particularly where the nosing will meet existing flooring, underlay or another covering.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe universal format gives it potential for different staircase projects, but compatibility depends on the stair construction and the exact profile required. Measuring the tread edge, surrounding floor height and intended fitting position helps prevent gaps or an unsuitable transition after installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eTen Matching Lengths for Larger Projects\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe pack contains ten pieces, with each stair nosing measuring 900mm in length. This quantity is practical for completing several steps while maintaining the same material and general appearance throughout the staircase.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBefore purchasing, count the number of stairs that require nosing and measure the width of each step separately. Stair widths are not always identical, particularly in older properties, so checking every tread can reduce unnecessary cutting and material waste during fitting.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003ePlanning Cutting and Installation\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSolid oak stair nosing can generally be trimmed using appropriate woodworking equipment when a stair is narrower than the supplied 900mm length. Every piece should be measured and marked individually before cutting to account for wall angles, skirting positions and small variations between steps.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplier information does not confirm a particular fixing method or whether fixings are included. The suitable installation approach will depend on the nosing profile, stair material and existing floor finish. A competent joiner or flooring installer should confirm the correct adhesive or mechanical fixing method before installation begins.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eLooking After Natural Oak Nosing\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRoutine cleaning should be carried out with methods suitable for natural hardwood. Loose dust and grit should be removed regularly because abrasive particles can gradually mark the surface in busy stair areas.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAvoid leaving excessive moisture on the timber, and use cleaning products intended for the final treatment applied to the oak. As the supplier details do not specify whether the nosing is supplied finished, sealed or untreated, its surface condition should be checked before installation and any required finishing work planned accordingly.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat is included in this pack of solid oak stair nosing?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe pack contains ten individual solid hardwood oak stair nosings. Each piece measures 900mm in length and 60mm in width. Fixings, adhesives and surface treatments are not confirmed in the supplied product information, so these should not be assumed to be included. Check the complete package contents when the order arrives and arrange any installation materials separately where required.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs every stair nosing in the pack 900mm long?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The supplied information states that each of the ten pieces measures 900mm in length. Measure every stair tread before ordering because staircase widths can differ slightly, especially in older or altered properties. Where a tread is narrower than 900mm, the nosing may require accurate trimming to produce a clean fit against walls, strings or surrounding joinery.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan the oak stair nosing be cut to fit my staircase?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSolid oak can normally be cut using suitable woodworking tools, although the exact cutting method will depend on the nosing profile and the finish required. Measure and mark each piece independently rather than relying on one measurement for the entire staircase. Clean, controlled cutting is important because visible splintering or uneven ends may affect the quality of the completed stair edge.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes this stair nosing come with adhesive or fixing screws?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplier specifications do not confirm that adhesive, screws or other fixings are included. The correct fixing method also depends on the stair substrate, the shape of the nosing and the floor covering that meets it. Before installation, ask a qualified joiner or flooring fitter to confirm whether an appropriate adhesive, concealed fixing or mechanical fastening method should be used.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWill all ten oak pieces have exactly the same colour and grain?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNatural oak contains variations in grain, tone and surface character, so the pieces may not look completely identical. These differences are a normal feature of real hardwood rather than a manufacturing defect. Laying the pieces out before fitting allows the installer to arrange the grain and colour variation across the staircase in a balanced and visually consistent order.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this universal stair nosing suitable for every staircase?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe term universal indicates broad potential use, but it does not guarantee compatibility with every staircase, floor covering or edge profile. Confirm the 900mm length, 60mm width and physical profile against the existing steps before purchasing. The stair material, floor height, tread depth and proposed fixing position should all be considered to ensure a secure and correctly aligned installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs the oak supplied sealed or ready to install?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplier information does not state whether the oak is sealed, lacquered, oiled or supplied untreated. Inspect the surface before installation and confirm whether sanding, sealing or another protective treatment is required. Any finish used should be suitable for hardwood stair components and applied according to the product manufacturer’s instructions before the staircase is placed into regular use.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rubber Fit Floors","offers":[{"title":"Default Title","offer_id":54479594422618,"sku":null,"price":373.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/6516\/4890\/files\/s-l1600_9e9a147e-679e-4c6e-9234-e6fb6a500d5b.webp?v=1785157736"},{"product_id":"stair-nosing-aluminium-grooved-oak-durable-30x20mm-retro-fit-self-adhesive-2-7m","title":"Stair Nosing Aluminium Grooved Oak Durable 30x20mm Retro-Fit Self-Adhesive 2.7m","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAdd a Natural Oak Finish While Protecting Stair Edges\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eStaircases are exposed to constant daily pressure from walking, footwear, and general movement. Over time, the front edges of stairs can become worn, damaged, or lose their original appearance. This aluminium stair nosing with a grooved oak finish provides a practical retro-fit solution for improving the look of existing stairs while helping protect vulnerable stair edges.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDesigned with a 30x20mm profile and a 2.7m length, this stair nosing offers extended coverage for larger stair projects where a consistent finish is required. The oak effect surface creates a natural appearance that complements wooden interiors, laminate flooring, and modern renovation styles.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe combination of aluminium construction and decorative oak finishing makes this product suitable for homeowners, installers, and interior improvement projects where both durability and appearance matter.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eA Practical Alternative for Stair Renovation Projects\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eReplacing complete stair systems can involve significant cost, time, and disruption. Retro-fit stair nosing provides a simpler way to refresh existing staircases by adding a finished edge detail without requiring major structural changes.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis aluminium profile is designed to cover the front edge of stairs, creating a cleaner transition between the horizontal tread and vertical riser. The oak finish helps maintain a warm, natural appearance while giving the staircase a more complete and professionally finished look.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 2.7m length is particularly useful for projects requiring longer continuous sections, helping reduce unnecessary joins and creating a more uniform installation across multiple steps.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAluminium Strength Combined With Oak Style\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAluminium is widely used in stair edging applications because it provides a stable and lightweight profile that can handle regular indoor foot traffic. The material helps the nosing maintain its shape while protecting the exposed stair edge from everyday contact.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe grooved oak finish adds a decorative layer that blends well with natural and contemporary interiors. Unlike plain metal trims, the wood-effect appearance creates a softer visual transition, making it suitable for homes and commercial interiors where design is an important consideration.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis combination of aluminium durability and oak styling provides a balanced solution for improving both the function and appearance of stair edges.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eGrooved Surface Design for a Defined Stair Finish\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe grooved surface gives the stair nosing a textured appearance that enhances the overall edge detail of the staircase. This design creates a more refined finish compared with a standard flat trim and works well in areas where a decorative yet practical stair solution is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile helps define the front edge of each step, making the staircase look more structured while providing a finished border between different flooring materials.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSelf-Adhesive Retro-Fit Installation Made Simple\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis stair nosing is designed for convenient retro-fit installation using a self-adhesive backing system. It allows suitable existing stair surfaces to be upgraded without the need for complicated fixing methods.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBefore installation, the stair edge should be cleaned thoroughly and allowed to dry. Removing dust, grease, and loose particles helps create a suitable surface for adhesion and supports a cleaner final result.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis makes the product a practical choice for renovation projects, DIY improvements, and professional installations where a straightforward stair upgrade is preferred.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eCaring for Your Aluminium Stair Trim\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMaintaining this stair nosing is straightforward. Regular cleaning with a soft cloth helps remove dust and everyday marks while keeping the oak finish looking neat.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAvoiding harsh abrasive cleaners helps protect the surface appearance. With correct installation and suitable indoor use, this stair trim can continue to provide a practical and attractive finishing detail for your staircase.\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat is oak effect aluminium stair nosing used for?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOak effect aluminium stair nosing is used to protect and improve the appearance of stair edges while adding a decorative finish. Stair fronts experience regular impact from footwear and daily movement, which can lead to visible wear over time. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhy choose a 2.7m length stair nosing?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA 2.7m stair nosing length provides extended coverage compared with shorter profiles, making it useful for larger stair projects or installations requiring fewer joins. Longer sections can help create a more consistent visual finish across multiple steps.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eCan this stair nosing be installed on existing stairs?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes, this product is designed as a retro-fit solution for existing staircases. The self-adhesive backing allows the trim to be applied to suitable prepared surfaces. Before installation, the stair edge should be clean, dry, and free from dust or loose material. Proper preparation helps improve adhesion and creates a more professional-looking finish.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the oak finish look suitable with wooden flooring?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes, the oak finish is designed to complement many wood-based interior styles. It can work well alongside wooden stairs, laminate flooring, and other wood-effect surfaces where a matching or coordinated appearance is required. The finish provides a warmer alternative to traditional metallic stair trims.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs aluminium stair nosing suitable for homes and offices?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAluminium stair nosing can be suitable for both residential and light commercial environments. It is commonly used in homes, apartments, offices, and interior renovation projects where stair edges need additional protection and a cleaner appearance. The suitability depends on the installation environment and expected level of foot traffic.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow do I maintain oak effect stair nosing?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMaintenance is simple and usually requires regular wiping with a soft cloth to remove dust and surface marks. Mild cleaning methods can be used when necessary, but abrasive cleaners should be avoided to help preserve the decorative oak finish. Keeping the stair trim clean helps maintain its appearance over time.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rubber Fit Floors","offers":[{"title":"30x20mm x 2.7m","offer_id":54484579025242,"sku":null,"price":124.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/6516\/4890\/files\/s-l1600_3514e226-1b30-481b-97f3-db3ba829dfdb.webp?v=1785331296"},{"product_id":"aluminium-stair-nosings-step-edge-nosing-for-laminate-wood-carpet-tile-40x25mm","title":"ALUMINIUM STAIR NOSINGS STEP EDGE NOSING FOR LAMINATE, WOOD,CARPET,TILE 40x25mm","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAluminium Stair Nosing for Laminate, Wood, Carpet and Tile\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis aluminium stair nosing provides a practical finishing solution for stair edges used with laminate, wood, carpet and tile flooring. With a 40mm x 25mm profile, it is designed to create a more clearly defined stair edge while helping protect the exposed front section of the step from everyday contact.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eStair edges experience repeated foot traffic and can be vulnerable to knocks, scuffs and general wear. Adding a dedicated aluminium step edge nosing creates a structured transition around this area while giving the staircase a cleaner and more complete appearance.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAluminium Construction for Practical Stair Edge Protection\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eManufactured from aluminium, the stair nosing provides a structured profile suitable for finishing different staircase surfaces. The material creates a neat edge without introducing an unnecessarily bulky appearance, making it suitable where both practical protection and a professional finish are important.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCovering the exposed stair edge can help reduce direct everyday contact with the underlying flooring material. This is particularly useful around areas where laminate, timber, carpet or tile meets the front edge of a step and requires a more defined finishing profile.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003e40mm x 25mm Profile for a Defined Finish\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 40mm x 25mm dimensions provide a clearly defined profile around the stair edge. This allows the nosing to form a visible transition between the tread and the front section of the step while helping create a more consistent overall finish.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe aluminium profile can also contribute to a tidier appearance by covering vulnerable or unfinished stair edges. Before installation, the dimensions of the staircase and flooring should be measured carefully to confirm that the 40mm x 25mm profile is appropriate for the intended application.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSuitable for Different Flooring Types\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis stair nosing is described as suitable for laminate, wood, carpet and tile, making it a versatile option for different staircase finishing projects. It can be considered for suitable stairs in homes, apartments, hallways, offices, retail premises and other residential or commercial interiors where the flooring and staircase construction are compatible with the profile.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eInstallation Considerations\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMeasure each stair edge carefully before preparing the aluminium profile so that sections can be positioned accurately and consistently. The intended installation area should be clean, properly prepared and free from loose dirt or debris before fitting. Check the alignment carefully to achieve an even finished edge. As no specific fixing method has been supplied, adhesive, screws, drilling or other installation methods should not be assumed.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eCleaning and Maintenance\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRoutine cleaning can help maintain the appearance of the aluminium stair nosing. Remove loose dust and debris regularly and wipe the surface using a soft or slightly damp cloth when required. Avoid unnecessarily abrasive cleaning methods that could affect the finish, and periodically inspect the profile and surrounding flooring to ensure the stair edge remains in suitable condition.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat flooring types can this stair nosing be used with?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis aluminium stair nosing is described as suitable for laminate, wood, carpet and tile flooring. Compatibility should still be checked against the particular staircase construction and flooring dimensions before installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat size is the aluminium stair nosing?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe stair nosing has a 40mm x 25mm profile. These dimensions create a defined stair edge and should be compared carefully with the intended step before selecting the product.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat material is the stair edging made from?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile is manufactured from aluminium. This provides a structured finishing element that helps cover exposed stair edges while maintaining a clean and relatively slim appearance.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow does stair nosing help protect step edges?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe aluminium profile covers the exposed front section of the stair. This can help reduce direct everyday contact from footwear, knocks and general movement around the vulnerable flooring edge.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan this stair nosing be used with laminate flooring?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. Laminate is specifically listed as one of the compatible flooring types. Always measure the existing flooring and stair edge carefully to confirm that the profile dimensions are suitable.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this profile suitable for wooden stairs?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied product information states that it can be used with wood. Its aluminium construction creates a defined finishing edge that can complement suitable timber staircase applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan this stair nosing be used with carpet?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. Carpet is included among the stated compatible flooring types. Suitability should be confirmed according to the carpet thickness, stair dimensions and overall installation requirements.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs the stair edging suitable for tiled steps?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. Tile is one of the flooring types listed for this aluminium stair nosing. The stair edge dimensions should be checked carefully before installation to ensure an appropriate fit.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan it be used in residential and commercial interiors?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile may be considered for suitable staircases in homes, offices, retail areas and other interiors. Final suitability depends on the staircase construction, flooring type and project requirements.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow should the aluminium stair nosing be cleaned?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRemove loose dust and debris regularly and wipe the aluminium surface with a soft or slightly damp cloth. Avoid unnecessarily abrasive products or cleaning methods that may affect its appearance.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rubber Fit Floors","offers":[{"title":"Screw Mounted – Silver – 910mm × 40mm × 20mm","offer_id":54495786434906,"sku":null,"price":27.99,"currency_code":"GBP","in_stock":true},{"title":"Screw Mounted – Gold – 910mm × 40mm × 20mm","offer_id":54495786467674,"sku":null,"price":27.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/6516\/4890\/files\/s-l1600_44640cd8-8598-4218-b5a2-a7e70643e85e.webp?v=1785762710"},{"product_id":"15x-aluminium-stair-nosing-edge-trim-step-nose-edging-nosing-for-carpet-wood-a37","title":"15x ALUMINIUM STAIR NOSING EDGE TRIM STEP NOSE EDGING NOSING FOR CARPET WOOD A37","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eA37 Aluminium Nosing for Neater, More Practical Stair Edges\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eExposed stair edges take repeated contact from footwear and can quickly become one of the most noticeable parts of a staircase. This A37 aluminium stair nosing provides a practical way to finish the front edge of a step while adding a more consistent appearance across the staircase.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile is made from aluminium and supplied with an anodised finish, giving the visible edge a clean appearance that works well with functional residential and general indoor staircase projects. It is intended for carpet and wood applications, making it useful when the step edge needs a dedicated finishing profile rather than being left exposed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSupplied as a set of 15 pieces, it is particularly convenient for staircases where multiple steps need a matching edge treatment.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAnodised Aluminium Built for Everyday Step Edge Protection\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAluminium is well suited to stair edging because it provides a firm profile without adding unnecessary bulk to the front of the step. On a staircase, the nosing sits at an area that receives frequent foot contact, so a properly fitted edge profile can help protect the underlying stair edge from direct everyday wear.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe anodised surface provides a finished outer layer rather than leaving the aluminium untreated. This gives the profile a cleaner appearance and makes it easier to integrate with a range of staircase finishes.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied product information also identifies the profile as non-slip. This makes the design particularly relevant to the front portion of a step, where additional surface control can support more confident footing during normal use. Correct installation remains important, as the overall stability of any stair nosing depends on the condition of the step and how securely the profile is fitted.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eCarpet and Wood Stair Applications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis A37 profile is intended for use with both carpeted and wooden staircases. On carpeted steps, aluminium nosing can create a more structured transition at the front edge and provide a cleaner boundary where the floor covering reaches the step nose.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOn wooden stairs, it can be used as a visible edge finish where the existing step construction is suitable for the profile. Before fitting, the stair edge should be checked for damage, uneven areas, loose coverings, or other conditions that could prevent the nosing from sitting correctly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile is most suitable where users want a functional aluminium finish rather than a soft or concealed stair edge. Its neutral construction makes it practical for domestic stairs, entrance staircases, corridors, utility areas, and similar indoor spaces with carpet or wood finishes.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eA Consistent Finish Across Multi-Step Staircases\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA major advantage of the 15-piece quantity is consistency. Instead of sourcing individual profiles separately, the set can be used across several steps where the same A37 stair nosing is required. This helps create a more uniform appearance from the bottom of the staircase to the upper landing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBefore installation, each step should be measured individually rather than assuming every stair is identical. Older or previously finished staircases can have small differences between steps, particularly around corners and existing floor coverings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied information does not provide the exact length, width, or height of each profile, so those dimensions should be confirmed from the selected product variation before ordering or cutting. This avoids assuming a measurement that may not match the intended staircase.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSimple Care for the Anodised Surface\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRoutine cleaning is usually enough to keep anodised aluminium stair edging looking tidy. Surface dust can be removed with a soft cloth, while mild cleaning methods suitable for anodised aluminium can be used when more thorough cleaning is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHarsh abrasive pads or aggressive cleaning tools are best avoided because they may mark the visible finish. Particular attention should also be given to the joint between the nosing and the stair covering, where dust can gradually collect.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profiles should be checked periodically after installation to make sure they remain securely positioned. Any movement should be addressed before continued use, particularly on frequently used staircases.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this A37 stair nosing suitable for carpeted stairs?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The product title identifies it for carpet and wood applications. It can finish exposed stair edges where an aluminium profile suits the existing floor covering and step construction.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan this stair nosing also be used on wooden steps?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. Wood is listed as a suitable application. Check the stair edge, surface condition, and chosen fixing method before installation so the profile sits securely and evenly.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat does the anodised finish provide?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe anodised finish gives the aluminium a clean surface suited to visible stair edges. It also helps maintain a consistent appearance during normal indoor use and routine cleaning.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs the nosing described as non-slip?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The supplied specifications describe the product as non-slip. It provides a practical stair-edge profile while supporting traction at the front edge of the step.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow many pieces are included?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe product title states 15x, so the set contains fifteen stair nosing pieces. This is useful where several matching steps need the same edge finish.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs the A37 profile supplied in a specific size?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo dimensions were included in the supplied information, so no length, width, or height should be assumed. Check the selected listing measurements before ordering for a particular staircase.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan it be used on indoor staircases?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The supplied category and product details position it as a stair edging solution suitable for typical indoor staircase projects using carpet or wood finishes.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes aluminium stair nosing help protect step edges?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt can help cover exposed stair edges and reduce direct contact with the underlying edge during everyday use. Suitability still depends on correct fitting and stair condition.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow should the anodised surface be cleaned?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUse a soft cloth or mild cleaning method suitable for anodised aluminium. Avoid harsh abrasive tools that could mark the visible finish, and remove dust regularly.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this product manufactured in the United Kingdom?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The supplied information lists the country or region of manufacture as the United Kingdom. This can be included as a specification without adding any brand reference.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rubber Fit Floors","offers":[{"title":"Silver - 900mm x 36mm x 20mm","offer_id":54571765989722,"sku":null,"price":272.99,"currency_code":"GBP","in_stock":true},{"title":"Gold - 900mm x 36mm x 20mm","offer_id":54571766022490,"sku":null,"price":272.99,"currency_code":"GBP","in_stock":true},{"title":"Champagne - 900mm x 36mm x 20mm","offer_id":54571766055258,"sku":null,"price":272.99,"currency_code":"GBP","in_stock":true},{"title":"Black - 900mm x 36mm x 20mm","offer_id":54571766088026,"sku":null,"price":272.99,"currency_code":"GBP","in_stock":true},{"title":"Inox - 900mm x 36mm x 20mm","offer_id":54571766120794,"sku":null,"price":272.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/6516\/4890\/files\/s-l1600_43fa8400-4f2a-4e1d-9dee-1b5116b07adb.webp?v=1786604420"},{"product_id":"2-7m-aluminium-stair-noding-step-edge-nosing-trim-for-laminate-wood-41x26-6mm-1","title":"2.7m ALUMINIUM STAIR NODING STEP EDGE NOSING TRIM FOR LAMINATE, WOOD.41x26.6mm","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eA Clean Edge Solution for Laminate and Wood Stairs\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe front edge of a stair tread experiences repeated contact as people move between floors, making it an important area for both finishing and practical protection. This 2.7m aluminium stair edge nosing is designed to create a structured edge across suitable stair treads while providing a non-slip surface for everyday foot traffic.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe rigid aluminium construction gives the profile a clean, defined appearance that works particularly well with laminate and wood stair surfaces. Rather than using a flexible trim that simply follows the edge, this type of profile provides a more substantial finish across the leading section of the tread.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 41 x 26.6mm profile size gives the nosing enough coverage to create a noticeable edge treatment without relying on a bulky construction. However, stair dimensions vary considerably, so the profile should always be compared with the available tread and riser area before purchase.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eDesigned to Complement Laminate and Timber Stair Surfaces\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eLaminate and wood stairs can require an edge treatment that complements the existing surface rather than looking out of place. The modern aluminium finish provides a contrasting detail that can work alongside contemporary stair designs while creating a consistent appearance across multiple steps.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile can also help give the front of each tread a clearly defined boundary. This is useful where the stair edge needs to remain visually distinct from the main tread surface, particularly on staircases with repeated daily use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFor laminate installations, the existing covering should be firmly secured before the profile is fitted. With wooden stairs, the condition and thickness of the timber should be checked to make sure there is sufficient material for the intended mechanical fixing. The surface should be stable before installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003e2.7m Length and 41 x 26.6mm Profile\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 2.7m length provides a substantial section of edging that can be measured and prepared for stair applications. A longer profile can reduce the need to work with numerous short sections and allows installers to plan matching pieces for several treads from one continuous length.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 41 x 26.6mm dimensions are important when assessing compatibility. The profile needs to sit correctly across the leading edge without interfering with the riser, adjacent covering or available walking area. Existing laminate or timber thickness can change the amount of space available for installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhere shorter pieces are needed, the aluminium profile can generally be cut using a suitable tool. Careful measuring is particularly important when preparing several sections for the same staircase, as consistent lengths and alignment contribute to a cleaner overall finish.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eNon-Slip Edge Support for Everyday Stair Use\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe non-slip type provides a dedicated grip area at the stair edge, where users naturally place their feet when moving up and down the staircase. Keeping this area clean and free from accumulated dust or debris helps maintain the practical function of the profile during regular use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe aluminium body provides rigidity and helps the nosing maintain a consistent shape once correctly installed. This makes it suitable for staircases where a firm, visible edge profile is preferred.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA stair nosing should not be viewed as a substitute for a suitable stair surface or correct installation. The underlying tread must remain sound, and the profile should be fitted so that it sits securely without creating an unwanted obstruction. Correct positioning is especially important on stairs used frequently throughout the day.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eInstallation with Supplied Screws\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBefore installation, check that the stair edge is clean, stable and suitable for mechanical fixing. Position the aluminium profile along the front of the tread and confirm that the 41 x 26.6mm dimensions sit correctly against the existing surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOnce the alignment has been checked, mark the fixing positions and secure the profile using the supplied screws. The fixing approach should be appropriate for the substrate. Timber, laminate-covered timber and other stair constructions can have different fixing requirements, so the installer should ensure the screws have adequate material to engage securely.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFor multiple steps, use a consistent reference point when positioning each section. This helps maintain a uniform appearance across the staircase. Where the profile needs to be shortened, measure carefully and make clean cuts before final positioning.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAfter installation, routine cleaning can remove dust and debris from the aluminium and non-slip area. Periodic checks of the fixing points are also sensible, particularly on staircases receiving frequent daily traffic. If movement develops, the profile should be inspected and the fixing addressed promptly.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat is this aluminium stair nosing used for?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt is designed to finish the front edge of stair treads while providing a defined non-slip surface. It can be considered for laminate and wood stairs where a neat, rigid edge profile is required. It is designed for edge finishing during installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat are the dimensions of the profile?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile is 2.7 metres long and measures 41 x 26.6mm. These dimensions should be compared with the actual tread and riser area before ordering to confirm a suitable fit. This helps confirm compatibility before purchase.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan it be used with laminate stairs?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The product is specifically suited to laminate applications, provided the stair construction offers an appropriate surface and fixing area. Check the profile dimensions before installation. The surface should remain stable on the staircase.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs it suitable for wooden stairs?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. It can be used with suitable wood stair constructions. The substrate should be sound and capable of accepting the supplied screws securely without damaging the surrounding stair material. Take care around finished timber surfaces where appropriate.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eAre screws included with the profile?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. Screws are included with the set. The installer should confirm that the supplied fixing approach is suitable for the particular stair substrate and installation conditions. Check the substrate before fixing for the application.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the profile have a non-slip surface?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The listed type is non-slip, providing a dedicated grip area along the stair edge. This can help create a more practical tread edge for regular pedestrian movement. Keep the grip area free of debris during regular use.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan the 2.7m profile be cut?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhere shorter sections are required, aluminium profiles can generally be cut with an appropriate tool. Accurate measuring is important before cutting, especially when several stair sections need matching lengths. Measure twice before cutting when preparing sections.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow should this stair nosing be installed?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePosition the profile along the leading edge of a clean, sound tread, check its alignment, mark the fixing points and secure it with suitable screws. The substrate should provide adequate holding support. Alignment should be checked before final fixing.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWill it work with every laminate or wood staircase?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNot necessarily. Stair tread depth, covering thickness, edge construction and available fixing material vary. Measure the staircase and compare it with the 41 x 26.6mm profile before purchasing. Existing coverings can change the available space before final selection.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow should the aluminium stair trim be maintained?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRoutine cleaning can remove dust and debris from the aluminium and non-slip area. Periodically inspect the fixing points and profile condition, particularly on stairs receiving frequent daily foot traffic. Avoid abrasive cleaning methods that could unnecessarily mark the aluminium finish over time.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rubber Fit Floors","offers":[{"title":"Anodised Silver - 270cm x 41mm x 26.6mm","offer_id":54573406159194,"sku":null,"price":60.99,"currency_code":"GBP","in_stock":true},{"title":"Anodised Gold - 270cm x 41mm x 26.6mm","offer_id":54573406191962,"sku":null,"price":60.99,"currency_code":"GBP","in_stock":true},{"title":"Anodised Shampagne - 270cm x 41mm x 26.6mm","offer_id":54573406224730,"sku":null,"price":60.99,"currency_code":"GBP","in_stock":true},{"title":"Anodised Inox - 270cm x 41mm x 26.6mm","offer_id":54573406257498,"sku":null,"price":60.99,"currency_code":"GBP","in_stock":true},{"title":"Anodised Black - 270cm x 41mm x 26.6mm","offer_id":54573406290266,"sku":null,"price":60.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/6516\/4890\/files\/s-l1600_7db4793d-50ea-424d-8826-3f24e9783764.webp?v=1786617679"},{"product_id":"2-7m-aluminium-stair-nosing-edge-trim-step-edging-carpet-wood-tile-30x20mm","title":"2.7m ALUMINIUM STAIR NOSING EDGE TRIM STEP EDGING CARPET, WOOD, Tile 30x20mm","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eA Versatile Edge Profile for Different Stair Surfaces\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eStair edges can experience more wear than the main tread surface because footwear repeatedly contacts the front of each step. A suitable nosing profile provides a defined edge while helping create a consistent finish across the staircase. This 2.7m aluminium stair nosing is designed for use with carpet, wood and tile applications where a compact 30 x 20mm profile is appropriate.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe aluminium construction gives the trim a firm structure and a modern appearance. Its matt finish provides a restrained look that can work with different interior styles without making the stair edge unnecessarily prominent. The profile is supplied in a 2700mm length, allowing it to be measured and prepared according to individual stair requirements.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe listed installation method is glue down, making this profile suitable for applications where adhesive fixing is preferred. Before installation, the existing surface should be clean, dry, stable and suitable for the selected adhesive.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003e30 x 20mm Dimensions for Controlled Stair Edge Coverage\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe dimensions of a stair nosing are important because the profile needs to sit correctly across the leading edge without interfering with the usable tread area. This model measures 30mm wide by 20mm high, giving it a relatively compact profile for suitable stair constructions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 2mm item thickness relates to the aluminium profile itself and should be considered when checking how the trim will meet the surrounding surface. Existing carpet, wood or tile thickness can affect the final position, so measurements should be taken from the actual staircase rather than relying solely on general dimensions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 2700mm length provides a continuous section that can be measured for individual steps. Where shorter pieces are needed, the aluminium can be prepared to the required length using an appropriate cutting method. Accurate measurement before cutting is particularly important when several steps require matching sections.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eDesigned Around Carpet, Wood and Tile Applications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOne of the useful aspects of this stair edge trim is its stated suitability across several common stair surface types. Carpeted stairs can require a defined transition at the front edge, while wood and tiled stairs may benefit from a contrasting aluminium detail that separates the tread from the riser.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe installation surface should always be assessed before fitting. Carpet should be securely installed, timber should be sound, and tiles should be firmly bonded without loose or damaged sections. Any uneven areas should be addressed before the profile is positioned.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe trim is listed with moisture-resistant, mould-resistant and frost-resistant characteristics, which can be relevant when selecting a profile for different interior conditions. However, the actual environment should still be considered carefully, particularly where stairs are exposed to persistent moisture or significant temperature changes.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eGlue-Down Installation and Practical Fit\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis profile is designed for glue-down installation. The preparation of the substrate therefore has an important effect on the finished result. Dust, loose material, grease and moisture should be removed from the bonding area before applying a suitable adhesive.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePosition the 2700mm profile along the stair edge and check its alignment before permanently fixing it. When several steps are being fitted, maintaining a consistent position from one tread to the next helps create a more uniform appearance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile is also described as easy to install and easily replaceable, which can be useful when planning maintenance or future stair alterations. If replacement becomes necessary, the existing adhesive and substrate should be dealt with according to the adhesive manufacturer's guidance before a new section is fitted.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe matt aluminium finish can be cleaned as part of normal stair maintenance. Keeping the surface free from accumulated dirt also helps preserve its appearance and keeps the non-slip area clear during everyday use.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eChoosing the Right Profile for Your Staircase\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe most important consideration before purchasing is compatibility with the existing stair construction. Measure the tread edge, covering thickness and available fixing area, then compare these measurements with the 30 x 20mm profile.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis trim can be considered for areas including basements, bathrooms, bedrooms, conservatories, kitchens, living rooms and mudrooms according to the supplied product information. Its listed features include hard-wearing, moisture-resistant, mould-resistant, noise-resistant and frost-resistant characteristics, providing several practical considerations for different interior environments.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe product has an AC4 commercial medium-traffic rating listed in the supplied specifications. This information can be useful when assessing suitability for areas with regular use, although the staircase construction and installation method remain equally important.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFor the best result, select an adhesive appropriate for both the substrate and aluminium profile, follow its application instructions, and allow the bond to establish as recommended before putting the staircase into regular use.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan this stair nosing be used with carpet?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The profile is listed for carpet applications and can provide a defined aluminium edge where the carpet meets the stair front. The carpet should be securely fitted and the installation surface prepared before glue-down installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs it suitable for wood and tile stairs?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The supplied details list carpet, wood and tile applications. Always check the 30 x 20mm dimensions against the actual stair edge and make sure the existing surface is sound before installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat size is the aluminium stair trim?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile measures 30mm wide by 20mm high and is supplied in a 2700mm length. The listed item thickness is 2mm, so these dimensions should be considered when checking the available stair-edge space.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow is this stair nosing installed?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt is designed for glue-down installation. The bonding surface should be clean, dry and stable before applying a suitable adhesive. Position the profile carefully and follow the adhesive manufacturer's instructions.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan the 2700mm profile be cut?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes, the long profile can be prepared into shorter sections where required using a suitable cutting method for aluminium. Accurate measuring is recommended before cutting, particularly when matching several stair treads.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the trim have a non-slip design?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The product is listed as non-slip. The profile creates a dedicated stair-edge surface, while keeping the area clean and free from accumulated debris supports its intended everyday function.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat finish does the profile have?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied specification lists a matt finish. This gives the aluminium trim a more subdued appearance that can work alongside different stair surfaces and interior styles without an overly reflective appearance.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan it be used in moisture-prone rooms?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied features include moisture-resistant and mould-resistant characteristics, and the listed rooms include bathrooms and mudrooms. The substrate and adhesive should nevertheless be appropriate for the conditions.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this profile suitable for commercial areas?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied information lists an AC4 commercial medium-traffic rating. It may therefore be considered for suitable commercial environments, subject to the staircase construction, expected traffic and correct installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow should the aluminium nosing be maintained?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRoutine cleaning can remove dust and debris from the profile and non-slip area. Avoid methods that could unnecessarily damage the matt finish, and inspect the trim periodically to ensure the bonded edge remains secure.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rubber Fit Floors","offers":[{"title":"Silver - 2.7m x 30mm x 20mm","offer_id":54573543686490,"sku":null,"price":57.99,"currency_code":"GBP","in_stock":true},{"title":"Matt Brass - 2.7m x 30mm x 20mm","offer_id":54573543719258,"sku":null,"price":57.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/6516\/4890\/files\/s-l1600_de78afc0-6320-4743-954b-494c965170e4.webp?v=1786618517"},{"product_id":"1-8m-aluminium-stair-nosing-edge-trim-step-nose-edging-nosings-for-carpet-wood","title":"1.8m ALUMINIUM STAIR NOSING EDGE TRIM STEP NOSE EDGING NOSINGS FOR CARPET WOOD","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eA Practical Edge Trim for Carpet and Wood Stairs\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe front edge of a staircase is exposed to repeated foot contact, making it one of the most important areas to finish correctly. This 1.8m aluminium stair nosing provides a practical edge profile for suitable carpet and wood stair applications, helping create a more structured transition at the front of each tread.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWith a 1.8m overall length, the profile offers a manageable section for individual stair applications while allowing the installer to measure each tread before cutting where necessary. The aluminium construction provides a rigid edge detail, while the non-slip specification adds a functional feature for stairs used regularly throughout the day.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis profile is particularly relevant where the staircase combines a hard stair structure with carpet or wood surfaces. Before installation, the existing tread dimensions and covering should be checked carefully to make sure the profile is appropriate for the available edge area.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eBringing Definition to Carpeted and Wooden Steps\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCarpet and wood create very different visual and tactile finishes, but both require careful attention around the front of a stair tread. A suitable nosing can help establish a clear edge and provide a more complete appearance once the main stair covering has been installed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOn carpeted stairs, the profile can be considered where the front edge requires additional definition. The installer should check how the carpet meets the tread and whether there is sufficient structure beneath the intended fixing area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFor wooden stairs, the aluminium trim can provide a contrasting or complementary metal detail depending on the surrounding interior. Its straightforward design can work in both contemporary and more traditional settings without making the stair edge unnecessarily elaborate.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 1.8m length is also useful when planning individual sections. Measuring each stair before cutting helps account for variations in tread width and ensures that the finished profile is correctly positioned from one step to the next.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAluminium Construction with Non-Slip Functionality\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAluminium provides a firm and rigid material for a stair edge profile, making it suitable where a more structured trim is preferred over a flexible edge treatment. The product is specified as non-slip, which makes this feature particularly relevant to a stair environment where people regularly place their footwear close to the front edge of each tread.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA non-slip stair edge should still be kept clean and properly maintained. Dust, dirt or other debris can accumulate on frequently used stairs and may affect the condition of the surface over time. Regular inspection is therefore sensible, particularly on staircases with heavy daily traffic.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile has a simple appearance that can integrate with different interior finishes. Whether the staircase uses carpet, timber or another compatible surface around the tread, the aluminium edge can provide a distinct visual boundary.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe product information identifies the country of manufacture as the United Kingdom, providing a UK-origin specification for this particular profile.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eMeasuring and Preparing the Stair Edge\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAccurate measurement should be completed before installation. Measure the exposed front edge of each tread and compare it with the 1.8m profile length. If the profile needs to be cut, allow for accurate measurements rather than assuming that every step has exactly the same dimensions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe existing stair surface should also be inspected before fitting. Carpet should be properly positioned, while wooden treads should be stable and free from loose sections around the proposed installation area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePositioning is important because the nosing should sit consistently along the front of the tread without creating an obstruction to normal foot placement. When multiple stairs are being completed, establishing a consistent alignment can help produce a more professional overall appearance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied product information identifies the profile as non-slip but does not specify the exact fixing method. The appropriate fixing system should therefore be selected according to the staircase construction and the installation requirements rather than assuming a particular method.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eChoosing the Right Length for Your Staircase\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 1.8m length makes this profile suitable for stair projects where individual sections can be prepared according to the width of each tread. It is important to calculate the required quantity before installation, particularly when covering a complete staircase.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile should be selected according to the actual dimensions and surface construction of the stairs. Carpet thickness, wooden tread design and the available edge area can all influence how successfully a particular nosing will fit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFor a staircase with varying tread widths, measure every step individually. This reduces the risk of cutting sections incorrectly and helps maintain consistent coverage across the installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRoutine cleaning can help preserve the appearance of the aluminium and keep the non-slip surface free from accumulated debris. Periodic checks are also worthwhile on heavily used stairs. If the profile becomes loose, damaged or incorrectly positioned, the installation should be inspected and corrected before continued regular use.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat is the length of this stair nosing?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe aluminium stair nosing is supplied in a 1.8m length, equivalent to 180cm or approximately 6ft. The length should be compared with the individual tread width before installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this profile suitable for carpeted stairs?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The supplied product information specifically identifies the profile for carpet and wood applications. Carpet thickness and the underlying stair construction should still be checked for compatibility.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan it be used on wooden stairs?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. It is suitable for appropriate wooden stair applications where an aluminium edge trim is required. The timber should be stable and suitable for the chosen fixing method.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the profile have a non-slip feature?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The product is listed as non-slip. Keeping the stair edge clean and free from accumulated dirt can help maintain its intended surface condition during normal use.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat material is the nosing made from?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile is made from aluminium. This provides a rigid metal construction suitable for creating a defined edge along compatible stair treads.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow should I measure my stairs?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMeasure the exposed front width of each tread individually and compare it with the 1.8m profile length. Individual measurements are recommended because stair widths can vary.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan one 1.8m profile cover several stairs?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt may be possible if the required sections are shorter than the supplied length, but the exact number depends on individual tread widths and how the profile is intended to be installed.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs a fixing method included in the specification?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied information identifies the product as non-slip but does not provide a specific fixing method. The fixing approach should therefore be selected according to the stair construction.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhere is this product manufactured?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied specification lists the country or region of manufacture as the United Kingdom. This information refers to the product specification provided for this stair nosing.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow should the aluminium stair nosing be maintained?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRegular cleaning can remove dust and debris from the profile and help maintain its appearance. Periodic inspection is also recommended, particularly on stairs receiving frequent daily use.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rubber Fit Floors","offers":[{"title":"Silver - 1800mm x 36mm x 20mm","offer_id":54573921993050,"sku":null,"price":54.99,"currency_code":"GBP","in_stock":true},{"title":"Gold - 1800mm x 36mm x 20mm","offer_id":54573922025818,"sku":null,"price":54.99,"currency_code":"GBP","in_stock":true},{"title":"Champagne - 1800mm x 36mm x 20mm","offer_id":54573922058586,"sku":null,"price":54.99,"currency_code":"GBP","in_stock":true},{"title":"Black - 1800mm x 36mm x 20mm","offer_id":54573922091354,"sku":null,"price":54.99,"currency_code":"GBP","in_stock":true},{"title":"Inox - 1800mm x 36mm x 20mm","offer_id":54573922124122,"sku":null,"price":54.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/6516\/4890\/files\/s-l1600_990017c9-3c14-44d1-81df-d0f522413aaa.webp?v=1786620319"},{"product_id":"aluminium-stair-nosing-edge-trim-step-edging-nosings-for-carpet-wood-30x20mm","title":"ALUMINIUM STAIR NOSING EDGE TRIM STEP EDGING NOSINGS FOR CARPET WOOD 30x20mm","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eA Neat Stair Edge Solution for Carpet and Wood\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe leading edge of a staircase can experience considerable wear, particularly where carpet, wood or another finished surface meets the front of the tread. A stair nosing provides a dedicated profile for this exposed area, helping create a cleaner transition while giving the step edge a more finished appearance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis aluminium stair nosing measures 30 x 20mm with a 900mm length, providing a practical profile for suitable stair applications. Its non-slip design adds a grip-focused surface to the leading edge, while the aluminium construction gives the trim a firm structure.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile is designed for glue-down installation, making it an option where adhesive fixing is preferred. Its modern matt finish can work across a range of interior settings, including residential rooms and areas with regular everyday foot traffic.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAluminium Construction and a Modern Matt Finish\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAluminium provides a rigid base for stair edging and is useful where a more structured finish is required along the front of a step. The matt finish gives the profile a relatively understated appearance, allowing it to work alongside different interior surfaces without becoming an overly prominent feature.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 2mm item thickness contributes to the overall profile construction, while the 30 x 20mm dimensions determine how the nosing sits across the stair edge. These measurements should be checked against the actual staircase before installation to make sure the profile provides the intended coverage.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 900mm length is suitable for stairs where the available edge length can be covered within this measurement. For wider or longer steps, the required number of profiles and the installation layout should be considered before starting the project.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eNon-Slip Edge for Everyday Stair Traffic\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe leading edge of a stair is an important contact area because users naturally place their feet close to the front of the tread. A non-slip stair nosing introduces a dedicated surface in this position, providing additional grip as part of the overall stair finish.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis makes the profile relevant to areas where stairs are used regularly throughout the day. It can be considered for domestic spaces as well as suitable interior areas with medium levels of traffic.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe product is also described as hard-wearing, moisture resistant, mould resistant and frost-resistant. These characteristics may be useful when assessing the profile for different environments, although the suitability of any stair nosing should always be considered alongside the specific installation conditions and surrounding materials.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eGlue-Down Installation for Carpet and Wood Stair Surfaces\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis stair nosing is designed for glue-down installation. Adhesive fixing can provide a clean installation approach where drilling or mechanical fixings are not preferred, provided the selected adhesive is compatible with both the nosing and the underlying surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBefore installation, the stair edge should be clean, dry, stable and free from dust, grease or loose material. Accurate measurement is particularly important because the 900mm profile needs to be positioned correctly along the leading edge.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhere carpet or wood is already installed, check how the nosing will meet the existing surface before applying adhesive. The profile should sit consistently along the edge without creating an unwanted obstruction.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAllow the adhesive to cure according to the adhesive manufacturer's instructions before exposing the installation to normal traffic. Proper surface preparation and correct adhesive selection are important parts of achieving a reliable finished result.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSuitable Interior Areas and Everyday Applications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe combination of aluminium construction, non-slip design and glue-down installation makes this profile suitable for a range of interior stair projects. It can be considered for stairs finished with carpet or wood where a defined edge trim is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe listed room applications include basements, bathrooms, bedrooms, conservatories, kitchens, living rooms and mudrooms. This broad range reflects the profile's suitability for different indoor settings, although moisture levels, substrate condition and installation requirements should still be assessed for each location.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe modern styling and matt finish can complement contemporary interiors, while the relatively compact 30 x 20mm profile avoids using an unnecessarily large edging section where a smaller trim is sufficient.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFor buyers comparing stair nosing options, the key considerations are the tread dimensions, existing surface, installation method, profile size and expected traffic level. This 30 x 20 x 900mm aluminium profile provides a practical option where those requirements align with the staircase.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat size is this aluminium stair nosing?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe stair nosing measures 30 x 20mm and has an overall length of 900mm. The item thickness is listed as 2mm. Check these dimensions against the available stair edge before purchasing.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this stair nosing suitable for carpet?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The product is specifically listed for carpet and wood applications. The existing carpet surface and stair edge should be checked beforehand to ensure the profile can be positioned correctly.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan it be used with wood stairs?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. It can be considered for suitable wood stair surfaces. The surface should be stable, clean and prepared appropriately before the glue-down installation is carried out.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow is this stair nosing installed?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe product is designed for glue-down installation. A suitable adhesive should be selected according to the nosing and substrate, while the stair surface should be clean, dry and free from loose material.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs the profile non-slip?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. It is specified as a non-slip stair nosing. The profile is intended to provide a grip-focused surface along the leading edge of the tread during everyday stair use.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat is the length of the profile?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe listed item length is 900mm. This provides a 900mm section of stair edging, so the width of the individual step should be measured to determine whether one piece provides sufficient coverage.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat finish does the stair nosing have?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile has a matt finish and a modern style. This gives it a relatively understated appearance that can work with different interior stair finishes and surrounding décor.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs the profile suitable for medium traffic?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied information lists an AC4 commercial medium-traffic rating. This can be considered when assessing the product for suitable interior applications, but the actual suitability should also be assessed against the specific stair environment.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan it be used in moisture-prone rooms?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe product is listed as moisture resistant and mould resistant and is specified for rooms including bathrooms. Nevertheless, installation conditions and the compatibility of the adhesive and substrate should be checked carefully in areas exposed to moisture.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat should I check before buying this stair nosing?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMeasure the stair edge, check the existing surface material and confirm that the 30 x 20mm profile and 900mm length provide suitable coverage. Also consider the glue-down installation method and the condition of the substrate.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rubber Fit Floors","offers":[{"title":"Silver - 900mm x 30mm x 20mm","offer_id":54574485176666,"sku":null,"price":37.99,"currency_code":"GBP","in_stock":true},{"title":"Matt Brass - 900mm x 30mm x 20mm","offer_id":54574485209434,"sku":null,"price":37.99,"currency_code":"GBP","in_stock":true},{"title":"Oak - 900mm x 30mm x 20mm","offer_id":54574485242202,"sku":null,"price":37.99,"currency_code":"GBP","in_stock":true},{"title":"Black - 900mm x 30mm x 20mm","offer_id":54574485274970,"sku":null,"price":37.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/6516\/4890\/files\/s-l1600_d3d9fd14-35bc-4810-9247-29e3bf6b5ee2.webp?v=1786626614"},{"product_id":"aluminium-stair-noding-step-edge-nosing-trim-for-laminate-wood-41x26-6mm-a42","title":"ALUMINIUM STAIR NODING STEP EDGE NOSING TRIM FOR LAMINATE, WOOD..41x26.6mm A42","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eA Defined Edge for Laminate and Wood Stairs\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe front edge of a stair is exposed to regular foot contact and can become one of the most noticeable areas of wear on a staircase. An aluminium stair nosing provides a dedicated trim for this exposed section, helping create a cleaner transition while giving the step a more clearly defined leading edge.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis 41 x 26.6mm stair edge nosing is designed for suitable laminate and wood stair applications. Its aluminium construction provides a firm profile, while the non-slip design introduces a grip-focused surface at the front of the tread.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile can be considered for both new stair projects and refurbishment work. Before installation, the existing stair dimensions should be checked carefully to make sure the 41 x 26.6mm profile provides the required coverage without creating an unsuitable projection.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAluminium Construction for a Clean Stair Finish\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAluminium is a practical material for stair edging where a rigid and clearly structured profile is required. When fitted correctly, the nosing follows the front edge of the step and creates a defined transition between the tread and riser.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis can be particularly useful on laminate and wood stairs, where protecting the exposed edge and maintaining a consistent finish are important considerations. The profile also provides a straightforward visual boundary between the walking surface and the front of the step.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe actual performance of the nosing depends on correct sizing, preparation and installation. The underlying stair should therefore be checked before fitting, particularly if the existing laminate or wood surface has areas of damage, movement or unevenness.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eNon-Slip Support at the Leading Edge\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe leading portion of a stair receives repeated foot placement as users move from one step to another. A non-slip stair nosing adds a dedicated grip-focused surface to this area, helping create a more functional finish along the front edge.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCorrect positioning is important. The profile should run evenly across the stair and sit firmly against the intended edge. An accurately aligned installation gives the staircase a more consistent appearance and helps avoid uneven sections along the tread.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA non-slip stair nosing should be viewed as one component of a properly maintained stair system. The condition of the stairs, surrounding surface and overall installation should also be considered when planning a refurbishment.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003e41 x 26.6mm Profile with Screw Fixing\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 41 x 26.6mm dimensions determine how the profile sits over the front portion of the stair. Measuring the existing tread before ordering is therefore important, especially where laminate or wood already covers the step.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile is supplied with screws for mechanical fixing. Before fitting, the surface should be clean, dry and suitable for the selected fixing method. Position the nosing carefully along the leading edge and mark the fixing points to maintain a straight, even installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhere required, appropriate pilot holes can be prepared according to the material beneath the stair surface. Once fixed, check along the complete profile to make sure it is seated firmly and does not move under normal pressure.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied screws provide the basic fixing components, while the exact installation approach should take account of the construction and condition of the individual staircase.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSuitable for Stair Refurbishment and Interior Applications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis aluminium stair nosing can be considered for suitable domestic and interior commercial stairways finished with laminate or wood. It may be useful where an existing stair edge needs a new finishing profile or where a dedicated nosing is being incorporated into a refurbishment project.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFor residential stairs, the profile provides a practical option for frequently used steps where a defined aluminium edge and non-slip surface are desirable. It can also be considered for suitable office or commercial interiors where the stair construction and fixing requirements are compatible.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBefore purchasing, compare the 41 x 26.6mm profile with the actual dimensions of the stair. The condition of the laminate or wood should also be assessed so that the nosing can be installed onto a suitable, stable surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWith its aluminium construction, non-slip design, laminate and wood suitability, 41 x 26.6mm dimensions and supplied screws, this stair edge profile offers a practical option for finishing and protecting suitable stair edges.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat is this aluminium stair nosing designed for?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis profile is designed to finish the leading edge of suitable stairs while providing a non-slip surface at the front of the tread. It is intended for applications where laminate or wood stair surfaces require a defined edge profile.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat are the dimensions of this stair edge trim?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile measures 41 x 26.6mm. These measurements determine the amount of stair-edge area covered, so the existing tread should be measured before purchasing to confirm that the profile is suitable.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan this nosing be used on laminate stairs?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The product is specified for laminate applications. The laminate should be securely installed and the underlying surface should be clean, stable and suitable for mechanical fixing before fitting the nosing.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs it suitable for wood stair surfaces?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. It can be considered for suitable wood stair applications. Check the condition and construction of the wood before installation to ensure the supplied screws and chosen fixing approach are appropriate.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs the stair nosing non-slip?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The product is specified as non-slip. The profile is designed to provide a grip-focused surface along the leading edge of the stair tread during everyday use.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eAre screws included with the product?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. Screws are included in the set. The actual fixing process should be adapted to the construction and condition of the staircase to achieve an appropriate installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan this profile be used for stair refurbishment?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. It can be considered for refurbishment projects where existing laminate or wood stair edges require a new finishing profile. Measure the staircase and inspect the substrate before installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow should I prepare the stair before installation?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe installation area should be clean, dry and structurally stable. Any loose, damaged or uneven material should be addressed before positioning the nosing so that it can sit correctly along the stair edge.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this profile suitable for commercial interiors?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt may be suitable for appropriate interior commercial applications where the stair dimensions, substrate and fixing method are compatible. Traffic levels and installation conditions should be assessed before fitting.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow do I know if 41 x 26.6mm is the right profile size?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMeasure the tread depth and the available front-edge area of your stair, then compare those measurements with the 41 x 26.6mm profile. This helps confirm that the nosing will provide suitable coverage without an unsuitable projection.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rubber Fit Floors","offers":[{"title":"Anodised Silver - 900mm x 41mm x 26.6mm","offer_id":54574502510938,"sku":null,"price":37.99,"currency_code":"GBP","in_stock":true},{"title":"Anodised Gold - 900mm x 41mm x 26.6mm","offer_id":54574502543706,"sku":null,"price":37.99,"currency_code":"GBP","in_stock":true},{"title":"Anodised Champagne - 900mm x 41mm x 26.6mm","offer_id":54574502576474,"sku":null,"price":37.99,"currency_code":"GBP","in_stock":true},{"title":"Anodised Inox - 900mm x 41mm x 26.6mm","offer_id":54574502609242,"sku":null,"price":37.99,"currency_code":"GBP","in_stock":true},{"title":"Anodised Black - 900mm x 41mm x 26.6mm","offer_id":54574502642010,"sku":null,"price":37.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/6516\/4890\/files\/s-l1600_1a8727e8-80e4-4d9e-85a5-4a0419d8ebb9.webp?v=1786626970"},{"product_id":"2-7m-aluminium-stair-nosing-edge-trim-step-nose-edging-nosings-for-carpet-wood","title":"2.7m ALUMINIUM STAIR NOSING EDGE TRIM STEP NOSE EDGING NOSINGS FOR CARPET WOOD","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eA Longer Profile for Consistent Stair Edge Finishing\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis 2.7m aluminium stair nosing is designed for stair projects where a practical edge trim is required across carpet or wood finished steps. The longer profile provides useful coverage for larger stair areas while allowing the section to be measured and cut to suit individual tread widths.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMade from aluminium, the profile provides a rigid structure around the front edge of a stair. Its 36mm width and 20mm height create a noticeable edge treatment without relying on a bulky construction. This makes it suitable for projects where the stair covering needs a defined transition at the front of each tread.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe modern profile can also provide a more consistent appearance when several steps are finished using the same trim. Rather than treating every stair edge as a separate detail, the 2.7m length allows the installation to be planned as part of the wider staircase design.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003e36mm Width and 20mm Height for Practical Coverage\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe dimensions are an important consideration when choosing stair nosing. At 36mm wide and 20mm high, this profile provides coverage around the stair edge while creating a visible front section.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe width should be compared with the available tread area before ordering. This is particularly important where carpet, timber or another stair covering has already been installed, as the finished surface can affect how the profile sits against the step.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 20mm height also needs to be considered alongside the existing stair construction. A correct dimensional match helps the trim sit neatly and reduces the need for adjustments during installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFor a staircase with multiple steps, measuring each tread before cutting is worthwhile. Even small differences between steps can affect the final appearance, particularly when profiles meet at corners or side edges.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eDesigned Around Carpet and Wood Stair Applications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis aluminium stair edging profile is suitable for staircases incorporating carpet or wood finishes. These materials can create different edge conditions, so the profile should be selected according to the finished tread rather than simply the underlying subfloor.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOn carpeted stairs, the nosing can provide a structured edge around the front of the tread. On wood stairs, it can introduce a contrasting aluminium detail while helping create a consistent finish along the stair edge.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile can work particularly well where the staircase requires a modern, straightforward appearance. Aluminium has a clean visual character that can complement both contemporary interiors and practical stair installations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBefore fitting, the stair edge should be checked for loose material, uneven surfaces or other conditions that could affect the profile's position. A clean and properly prepared surface gives the installation a better starting point.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003ePlanning Cuts and Sections Across the Staircase\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 2.7m length offers flexibility when planning a staircase with several individual treads. Depending on the width of the steps, one section can be measured and cut into suitable lengths, helping reduce unnecessary material joins.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAccurate measurement is important because each cut contributes to the finished appearance. The required length should be marked carefully, with attention given to side edges and any areas where two pieces meet.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe aluminium construction also makes the profile suitable for projects where a rigid stair-edge trim is preferred over softer edging materials. However, the installation method should always be selected according to the stair substrate and the requirements of the specific project.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhere multiple profiles are required, planning the layout before installation can help maintain consistent positioning from the first step to the last.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eA Practical Choice for Residential and Light Commercial Stairs\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis stair nosing can be considered for a variety of residential and light commercial staircase projects where carpet or wood finishes require an additional edge profile. Its modern appearance and longer 2.7m format make it suitable for both individual stair improvements and larger installations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFor domestic staircases, the profile can provide a more finished appearance around frequently used step edges. In offices and other light commercial interiors, it can form part of a consistent stair-edge treatment where appearance and practical finishing both matter.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied specifications identify the profile as aluminium, with a 36mm width, 20mm height and 2.7m length. These measurements should be checked carefully against the actual staircase before purchase, particularly when replacing an existing nosing or matching another profile.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this stair nosing suitable for carpet and wood?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. It is suitable for stair edges finished with carpet or wood where the 36mm width and 20mm height fit the step. Check the finished tread dimensions before installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat is the benefit of the 2.7m length?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 2.7m length can reduce the number of joins across longer stair runs. It is useful when a consistent appearance is preferred across several steps and accurate cutting can be planned.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat are the profile dimensions?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis stair nosing is supplied at 2.7m long, with a 36mm width and 20mm height. Check these measurements against the finished stair edge before ordering to ensure suitable coverage.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs aluminium suitable for busy stairs?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAluminium provides a rigid, hard-wearing profile for regularly used stair edges. Its performance will depend on correct installation, traffic levels and the condition of the supporting stair surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan the profile improve stair-edge visibility?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe raised profile creates a distinct line along the front of the step. This can make the tread edge easier to identify, particularly where the stair covering has limited contrast with surrounding surfaces.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan this profile be cut to individual step lengths?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 2.7m section can be cut to suit individual steps when suitable cutting tools are used. Measure carefully, allow for clean end finishing, and confirm the required length before cutting.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs 2.7m better than shorter stair nosing?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA 2.7m section is useful for longer runs and can reduce joins. Shorter sections may be easier to handle in smaller projects, so the best choice depends on stair width, layout and installation requirements.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan it be used in homes and offices?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. It can suit residential and light commercial stair projects when the dimensions and construction match the application. Always assess the substrate, finished stair covering and fixing requirements before installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow should I check fit before installation?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMeasure the stair width, tread edge and available fixing area. Confirm that the 36mm width and 20mm height suit the finished step, then plan cuts and joins before fitting the profile.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the product include a brand name?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e The product content is kept brand-neutral. The supplied specification identifies an aluminium stair edging profile with a modern style and a 2.7m length, without adding the supplier's brand to the product content.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Rubber Fit Floors","offers":[{"title":"Silver - 2700mm x 36mm x 20mm","offer_id":54575520842074,"sku":null,"price":69.99,"currency_code":"GBP","in_stock":true},{"title":"Gold - 2700mm x 36mm x 20mm","offer_id":54575520874842,"sku":null,"price":69.99,"currency_code":"GBP","in_stock":true},{"title":"Champagne - 2700mm x 36mm x 20mm","offer_id":54575520907610,"sku":null,"price":69.99,"currency_code":"GBP","in_stock":true},{"title":"Black - 2700mm x 36mm x 20mm","offer_id":54575520940378,"sku":null,"price":69.99,"currency_code":"GBP","in_stock":true},{"title":"Inox - 2700mm x 36mm x 20mm","offer_id":54575520973146,"sku":null,"price":69.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/6516\/4890\/files\/s-l1600_dd97eff8-51c1-4335-945b-48e4b55e0bb8.webp?v=1786633631"}],"url":"https:\/\/www.rubberfitfloors.co.uk\/collections\/wood-stair-nosing.oembed?page=3","provider":"Rubber Fit Floors","version":"1.0","type":"link"}