{"product_id":"10m-bullnose-stair-anti-slip-nosing-self-adhesive-vinyl-edging-strip-non-slip-st","title":"10M Bullnose Stair Anti Slip Nosing Self-Adhesive Vinyl Edging Strip,Non Slip St","description":"\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e10m Roll\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTwo-Tone Finish\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e50mm x 25mm Profile\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSelf-Adhesive Vinyl Edging\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eNon-Slip Bullnose Stair Trim for Multiple Step Edges\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eContinuous Edging for Several Stair Treads\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis bullnose stair nosing is supplied as a 10m continuous roll, making it practical for staircases where several tread edges need the same style of trim. The longer format allows each section to be measured according to the width of the individual step rather than relying on separate pre-cut profiles. This can support a more consistent appearance across the staircase while reducing unnecessary joins along a single edge. Before cutting or removing the adhesive backing, measure every intended tread separately and calculate the total required length, allowing for any fitting adjustments recommended in the supplied instructions.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eA 50mm x 25mm Bullnose Profile\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe edging has a listed cross-section of 50mm x 25mm and is described as a bullnose or angle-style stair trim. These dimensions determine how much of the horizontal tread and front stair edge the profile can cover, so they should be checked against the existing staircase before purchase. A correctly sized section should sit evenly without leaving unsupported areas, excessive overhang or a raised corner. The available information does not explain which measurement applies to each side of the angle, so the profile orientation should be confirmed from the physical product or packaging before installation begins.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eGrey and Yellow Non-Slip Surface\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe trim combines a grey body with a yellow section, creating a noticeable two-tone finish along the stair edge. This contrast can help make the front of the tread easier to identify while giving the staircase a consistent visual border. The product is described as non-slip, but this should not be interpreted as making every staircase completely slip-proof. Grip can still be affected by water, dust, loose debris, unsuitable footwear, worn material or incorrect fitting. Regular cleaning and inspection remain important, particularly on frequently used steps where dirt may collect around the raised bullnose profile.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSurface Preparation for Self-Adhesive Fitting\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe vinyl edging is supplied with a self-adhesive backing, allowing it to be installed without visible screw heads across the finished surface. Adhesive performance depends heavily on preparation, so the stair edge should be stable, level, clean and completely dry before fitting. Grease, dust, polish, loose paint and damaged surface material can prevent consistent contact. Each section should be measured, positioned and checked for alignment before the protective backing is removed. Repeatedly lifting and repositioning the trim may weaken the adhesive, so the installation instructions supplied with the product should be followed carefully.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eCutting, Cleaning and Checking the Installed Trim\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 10m roll will normally need to be divided into sections for individual steps, but the source does not specify an approved cutting tool or method. Check the supplied guidance before cutting so the ends remain straight and the material is not stretched or damaged. Once installed, loose grit can be removed with a soft brush, cloth or suitable vacuum attachment. A mild cleaner compatible with vinyl and PVC-rubber materials may be used for routine care, followed by thorough drying. Inspect the ends and adhesive edges periodically for lifting, movement or wear, and correct any loose area before normal stair use continues.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat length and profile size does this stair nosing have?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe product is supplied as a 10m continuous roll with a listed bullnose profile of 50mm x 25mm. The roll can provide material for several step edges, depending on the width and number of stairs. Measure each tread individually before ordering or cutting because stair widths can vary, even within the same staircase.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow is the self-adhesive edging installed?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe fitting surface should be firm, level, clean and completely dry before the backing is removed. Measure and position each section first, then press the adhesive side evenly onto the stair edge. Dust, polish, grease, loose coatings and moisture can reduce contact, while repeated repositioning may weaken the adhesive bond.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan the 10m roll be cut into separate stair lengths?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe roll is intended to provide a continuous supply of edging for multiple sections, but the seller information does not identify an approved cutting method or suitable tool. Check the product instructions before cutting. Each end should remain straight and smooth so it does not lift, curl or create an uneven corner at the stair edge.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the yellow and grey finish improve stair visibility?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe contrasting yellow and grey design creates a visually distinct border around the front of the tread, which may make the stair edge easier to recognise against some surrounding floor colours. Actual visibility will depend on lighting, floor finish and colour contrast. The product should not be treated as a certified visibility or accessibility aid unless supporting documentation confirms this.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the non-slip surface prevent all slips?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo. The product is described as non-slip, but no stair edging can prevent every possible slip. Water, dust, grease, loose debris, worn material, unsuitable footwear and poor installation can all affect traction. Keep the surface clean, check that the adhesive remains secure and stop using any step where the trim has lifted or moved.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhich stair materials can this edging be fitted onto?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe source confirms a self-adhesive stair trim but does not list specific compatible surfaces such as wood, tile, concrete, laminate or carpet. Adhesive performance varies between materials and finishes, so compatibility should be checked before installation. Avoid applying the strip over loose flooring, crumbling surfaces or heavily textured edges.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat do the 395mm x 248mm x 90mm dimensions represent?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe item details separately list dimensions of 395mm x 248mm x 90mm, while the product itself is described as a 10m roll with a 50mm x 25mm profile. The source does not explain the purpose of the larger figures, so they may relate to the packaged item rather than the fitted trim. This should be confirmed before publishing them as product dimensions.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rubber Fit Floors","offers":[{"title":"Default Title","offer_id":54465396080986,"sku":null,"price":54.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/6516\/4890\/files\/s-l1600_e16e6b8a-7d7d-4617-a04a-8153f39fd32e.webp?v=1784815954","url":"https:\/\/www.rubberfitfloors.co.uk\/products\/10m-bullnose-stair-anti-slip-nosing-self-adhesive-vinyl-edging-strip-non-slip-st","provider":"Rubber Fit Floors","version":"1.0","type":"link"}