{"product_id":"12m-self-adhesive-stair-nosing-rubber-pvc-non-slip-step-edge-trim-bullnose-strip","title":"12m Self Adhesive Stair Nosing Rubber PVC Non-Slip Step Edge Trim Bullnose Strip","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eLong-Length Edging for a Consistent Stair Finish\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis 12-metre PVC stair nosing is designed for covering and finishing the exposed front edges of multiple steps. Rather than working with individual pre-cut profiles, the continuous roll can be measured and divided according to the width of each stair, giving greater flexibility when working across a complete staircase.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 98mm-wide format provides coverage around the step edge and across part of the tread surface. This helps create a more uniform appearance where several stair edges need matching treatment while adding a dedicated surface over an area that experiences regular contact during everyday use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBecause the roll provides a substantial continuous length, it can also reduce the number of separate pieces that need to be ordered for larger installations. The exact number of steps covered will depend on the width of each tread, so measuring the entire staircase before cutting is important.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eBullnose Shape Around the Front of the Step\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe bullnose-style profile is intended to follow the front section of the stair edge, giving the tread a more finished appearance rather than leaving the edge exposed. This type of profile can be useful where existing step edges look worn, unfinished or visually inconsistent.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCorrect positioning is important when installing a bullnose trim. The profile should sit evenly along the step so that the front section remains properly aligned from one side to the other. Taking accurate measurements before cutting helps avoid short sections, uneven ends or unnecessary gaps.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUsing the same profile across multiple stairs can also provide greater visual consistency, particularly where black or grey edging is being used alongside neutral flooring and stair finishes.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003e98mm PVC Profile for Practical Surface Coverage\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied specifications identify the material as PVC and the width as 98mm. The profile covers more than just the immediate front edge, extending across part of the tread to provide a broader fitted area.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePVC offers enough flexibility for the trim to be measured and cut into individual stair lengths. This makes it practical when steps are not all exactly the same width, which can occur even within a single staircase.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEach stair should therefore be measured separately. Assuming identical measurements across every tread can lead to visible gaps or sections that require additional trimming. Planning the cuts in advance also helps make efficient use of the 12-metre roll.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSelf-Adhesive Fitting with Fewer Installation Steps\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA self-adhesive backing is integrated into the profile, allowing the stair nosing to be positioned without separate mechanical fixings being specified for normal installation. This can provide a cleaner finished appearance where exposed screws or other fixings are not preferred.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe quality of the installation will depend heavily on preparation. Before fitting, remove dust, grease, moisture, loose debris and any residue that could prevent the adhesive from making proper contact with the stair surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOnce the section has been cut, align it carefully before pressing it firmly into place. Applying even pressure across the complete length helps the backing make consistent contact. Repositioning should be kept to a minimum once the adhesive has been pressed against the surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eNon-Slip Surface for the High-Contact Stair Edge\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe product is described as non-slip, with the surface intended to provide additional traction around the front section of the step. This is a particularly important contact area because footwear regularly meets the stair nose during both ascending and descending movement.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe non-slip profile should still be maintained properly. Dust, grit and other loose particles can build up on frequently used stairs, so routine cleaning is useful for keeping the surface clear.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe trim is listed for use in any room, allowing it to be considered for different indoor staircase locations where a self-adhesive PVC profile is suitable for the existing surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003ePlanning Cuts from a 12-Metre Roll\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBefore cutting the material, measure the width of every stair that will receive the nosing. Add these measurements together to calculate the total amount required, then compare this figure with the available 12-metre roll.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAllowing a small amount of spare material can be useful for final trimming and minor measurement differences. Where several steps have similar dimensions, planning the cutting order beforehand can help reduce unnecessary offcuts.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt is also worth checking the condition of each stair edge before installation begins. The trim should not be relied upon to correct loose, damaged or unstable underlying surfaces. Any problems with the base should be addressed before the self-adhesive nosing is applied.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eMaintaining the Fitted PVC Edging\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRoutine care can help keep the stair nosing looking tidy and free from loose debris. Regular wiping or vacuuming is generally suitable for removing everyday dust and grit from the surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAvoid cleaning methods that could damage the PVC or disturb the adhesive around the edges. Periodically checking the fitted sections is also sensible, particularly on frequently used stairs, so any lifting or movement can be identified early.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied details do not confirm suitability for exposed outdoor conditions, so use in locations subject to continuous rain, standing water or significant weather exposure should be assessed separately.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this stair nosing suitable for indoor stairs?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The supplied details list it for use in any room, making it suitable for indoor stair edges where a self-adhesive PVC profile is appropriate. Fit it to a clean, dry and stable surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat size is the stair nosing roll?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe roll measures 12 metres in length and 98mm in width. This can cover several steps, depending on individual tread widths and the total number of stair edges being finished.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs the stair nosing self-adhesive?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The trim has a self-adhesive backing for straightforward fitting without separate fixings being specified. Preparation matters because dust, grease or moisture can reduce adhesive contact.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat material is the stair edging made from?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied specifications identify the material as PVC. This gives the profile flexibility for measuring, cutting and fitting around suitable stair edges while maintaining a neat finish.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat colours are available?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe product details list black and grey options. These neutral colours can work with interior stair styles, but the selected variation should be checked before ordering.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan the 12M roll be cut for individual steps?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The roll can be measured and cut into separate sections for each stair. Measuring every tread individually is recommended because step widths can vary slightly.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat is the benefit of the 98mm width?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 98mm profile covers the stair edge and part of the tread surface. This provides broader coverage and helps create a more consistent finish along frequently used step edges.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the non-slip surface provide additional grip?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe product is described as non-slip and is intended to add traction around the front of the step. Keep the surface clean because dust and loose debris can affect grip.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow should the stair surface be prepared?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRemove dirt, dust, grease, moisture, loose material and old adhesive residue before fitting. A clean, dry and stable base helps the self-adhesive backing make consistent contact.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow should this stair nosing be maintained?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRegular wiping or vacuuming helps remove dirt and grit. Avoid aggressive cleaning methods that could damage the PVC or disturb the adhesive around the fitted edges.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rubber Fit Floors","offers":[{"title":"Black - 12M x 98mm","offer_id":54603134959962,"sku":null,"price":59.94,"currency_code":"GBP","in_stock":true},{"title":"Grey - 12M x 98mm","offer_id":54603134992730,"sku":null,"price":59.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/6516\/4890\/files\/s-l1600_0fe61a62-1bc7-4692-838d-bd74d89d3b41.webp?v=1787038848","url":"https:\/\/www.rubberfitfloors.co.uk\/products\/12m-self-adhesive-stair-nosing-rubber-pvc-non-slip-step-edge-trim-bullnose-strip","provider":"Rubber Fit Floors","version":"1.0","type":"link"}