{"product_id":"15pc-step-edge-trim-stair-nosing-rubber-90cm-non-slip-bullnose-strip-50x25mm","title":"15PC Step Edge Trim Stair Nosing Rubber 90cm Non-Slip Bullnose Strip 50x25mm","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eProtect Stair Edges from Repeated Everyday Wear\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe front edge of a stair receives constant contact whenever people move between different levels, making it one of the areas most likely to show signs of wear. These 90cm stair nosing strips provide a practical covering for exposed step edges while creating a cleaner and more defined finish across the staircase.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEach piece is designed to sit around the leading section of the step, helping reduce direct contact with the underlying flooring material. This can be particularly useful on staircases where the original edge is vulnerable to scuffing, repeated foot traffic or general surface deterioration.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBecause the pack contains 15 pieces, it is suited to projects involving multiple steps where a consistent finish is required throughout the staircase. Measuring the stair dimensions before installation remains important so the supplied profile can be matched correctly to the intended surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003e50mm x 25mm Bullnose Profile for a Defined Stair Edge\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplier title lists a 50mm x 25mm bullnose profile, providing a shaped section designed to cover the front area of the step. This profile gives the staircase a more finished appearance while adding a dedicated protective layer around the exposed edge.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBullnose-style trims can be useful where a softer, rounded edge appearance is preferred rather than leaving a sharp or unfinished transition between the tread and riser. The profile also helps create a more consistent visual line across several steps when the same trim is installed throughout the staircase.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBefore ordering, the available tread and riser space should be checked carefully. Existing stair dimensions can vary, particularly where laminate, vinyl or other flooring has already been fitted, so the 50mm x 25mm profile should be compared against the actual step.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003ePVC Construction with a 3.3mm Low-Profile Design\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe item specifics identify PVC as the material used for these stair edge trims. PVC provides a lightweight and practical construction that can be formed into a consistent profile through the listed extruding process.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe stated thickness is 3.3mm, keeping the trim relatively slim while still creating a distinct covering around the stair edge. A lower-profile design can be useful where unnecessary build-up around the front of the step needs to be limited.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied colour is grey, giving the nosing a neutral appearance that can work alongside a range of common flooring finishes. Suitability should still be assessed according to the staircase, surrounding flooring and intended installation conditions rather than relying on colour or profile alone.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eM3 Tape Mounting Supports a Simpler Installation Process\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied specifications list an M3 tape stick mounting method, removing the need for assembly before installation. This can make the trims convenient for refurbishment work where a straightforward fitting method is preferred.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSurface preparation is particularly important with adhesive-backed stair edging. The intended stair edge should be clean, dry and free from dust, grease or loose material before the strip is positioned. Contamination beneath the tape can reduce the amount of direct contact between the adhesive and the substrate.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCareful alignment should also be completed before firm pressure is applied. Once positioned, each strip should sit evenly across the stair edge without unnecessary movement or raised areas. The suitability of adhesive fixing can depend on the stair surface, so the substrate should always be checked before fitting.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003e15-Piece Pack for Consistent Multi-Step Stair Projects\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA 15-piece pack provides enough individual trims to cover several stair edges within the same project, helping maintain a consistent appearance across the staircase. Each piece is listed as 90cm long, so stair width should be measured before installation to determine whether the supplied length suits the intended steps.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe complete pack has a listed gross weight of approximately 4kg, which can also be useful when planning handling and delivery. The supplier states that delivery is made from the nearest UK warehouse.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAfter installation, routine cleaning should focus on removing dust and loose debris from the stair edge. Each strip should also be checked periodically to confirm that it remains properly positioned, particularly on frequently used steps where repeated contact can place additional demand on adhesive-mounted edging.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat material is this stair nosing made from?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe item specifics list the material as PVC. Although the supplier title uses the word “rubber,” the detailed specification identifies PVC as the construction material, so this description follows the stated specification for accuracy.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow many stair nosing strips are included?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe pack contains 15 individual stair edge trims. This makes it useful for projects where several steps need to be finished in the same style, provided the 90cm length and 50mm x 25mm profile suit the staircase.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat is the length of each stair edge trim?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEach strip is listed as 90cm long. Before ordering, measure the width of the intended steps and compare it with the supplied length so you can confirm whether trimming or another size will be required.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat profile size does the nosing have?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplier title states a 50mm x 25mm bullnose profile. This gives the trim a defined section around the stair edge. Checking the tread and riser area first helps confirm that the profile is appropriate.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow is the stair nosing mounted?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe item specifics list an M3 tape stick mounting method. The stair surface should be clean, dry and free from loose dust before positioning so the adhesive backing has the best available contact with the substrate.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs any assembly required before fitting?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo assembly is listed as required. The product is supplied as stair edge trim pieces intended for direct positioning and installation. Measuring and surface preparation are still important before the adhesive-backed strips are fixed in place.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat colour and finish does the product have?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe listed colour is grey, giving the stair edge a neutral appearance that can work with many flooring tones. The supplier title also describes the trim as non-slip, with a bullnose-style stair edge format.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow should the stair nosing be maintained?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRoutine care should focus on keeping the trim and surrounding stair surface free from dust and debris. Periodically check that each strip remains properly positioned, especially on frequently used stairs where repeated foot contact may affect the installation over time.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rubber Fit Floors","offers":[{"title":"90cmx50x25mm","offer_id":54498309341530,"sku":null,"price":86.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/6516\/4890\/files\/s-l1600_5477822e-833b-499c-a649-5b71de3d6686.webp?v=1785849081","url":"https:\/\/www.rubberfitfloors.co.uk\/products\/15pc-step-edge-trim-stair-nosing-rubber-90cm-non-slip-bullnose-strip-50x25mm","provider":"Rubber Fit Floors","version":"1.0","type":"link"}