{"product_id":"2-7m-aluminium-bull-nose-stair-nosing-stair-edge-profile-edging-trim-for-5mm-lvt","title":"2.7m ALUMINIUM BULL NOSE STAIR NOSING STAIR EDGE PROFILE EDGING TRIM FOR 5MM LVT","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eA Purpose-Built Edge Profile for LVT Stairs\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhen LVT is installed on stairs, the front edge needs to be finished in a way that works with both the flooring thickness and the shape of the tread. This 2.7m aluminium bull nose stair nosing is designed for stair applications using 5mm LVT, providing a defined profile around the front edge of the step.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe bull nose shape creates a rounded transition at the exposed stair edge rather than leaving the LVT finish unsupported at the front. With a 37.5 x 35 x 13mm profile, the dimensions provide substantial coverage around the stair edge while allowing the profile to work as part of a dedicated LVT stair installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eDesigned Around 5mm LVT\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFloor thickness is an important consideration when choosing stair edging. A profile that does not correspond with the finished floor thickness may leave an uneven transition or require additional adjustment during installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis product is specified for 5mm LVT, making it suitable to consider where that flooring thickness is being used on the stair tread. Before fitting, the actual LVT thickness and stair dimensions should be checked against the profile to confirm compatibility.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile can be particularly useful during stair refurbishment projects where LVT is being introduced to existing steps and a defined aluminium edge is required to complete the installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAnodised Aluminium with a Matt Finish\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile is made from anodised aluminium and has a matt finish. This gives the stair edge a clean, modern appearance while maintaining the rigid form expected from an aluminium edging profile.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe anodised aluminium construction is suited to applications where a formed metal edge is preferred over a flexible trim. Its neutral finish can work alongside different LVT colours and interior styles without making the stair edge unnecessarily dominant.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied colour options are listed as Silver, Brushed and Bronze, allowing the profile to be considered alongside different stair and interior finishes.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eBull Nose Shape for a Defined Stair Transition\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe bull nose profile is shaped around the front of the stair tread, creating a rounded edge rather than a sharp exposed transition. This profile shape can help produce a more finished appearance when LVT is carried across the stair tread.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 37.5 x 35 x 13mm dimensions should be checked against the existing stair edge before installation. Stair construction can vary, so accurate measurement remains important even when the flooring thickness matches the stated 5mm specification.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eScrew-Fix Installation\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis profile uses a screw-fix installation method. Preparing the stair correctly before fixing helps ensure the nosing sits consistently along the front edge.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe stair surface should be clean, stable and ready to receive the profile. Measure the required length carefully, position the nosing to check alignment, and confirm that the LVT sits correctly within the intended profile before completing the installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAt 2.7m long, the profile can be cut or planned around the requirements of individual stair runs where shorter sections are needed. Accurate measuring before cutting helps minimise unnecessary waste and makes it easier to achieve clean joins.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eA Practical Option for Stair Refurbishment\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis aluminium bull nose stair nosing is suited to projects involving LVT-covered stairs where a dedicated edge profile is required. It can be considered for residential staircases and other interior applications where the stated 5mm LVT specification and screw-fix installation method are appropriate.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile is supplied individually, so the number of pieces required will depend on the width and number of stairs being completed. Measuring the full staircase before ordering helps establish how much material is needed and where individual sections will be positioned.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat type of flooring is this stair nosing designed for?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis profile is specified for 5mm LVT. It is intended for stair applications where LVT is being installed and an aluminium bull nose edge profile is required. The actual flooring thickness should still be checked before installation to confirm that it corresponds with the product specification.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat is the length of this aluminium stair nosing?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile has a coverage length of 2.7m, also listed as 270cm or approximately 8.10ft. The length can be planned according to the dimensions of the staircase, with individual sections measured carefully where the full length is not required.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat are the profile dimensions?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe stated profile size is 37.5 x 35 x 13mm, with an item thickness of 3.5mm. These measurements should be compared with the stair tread, riser and LVT installation area before fitting to ensure the profile is appropriate for the particular staircase.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow is this bull nose stair nosing installed?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe listed installation method is screw fix. The profile should be positioned and aligned on the stair before fixing, with the surface properly prepared. The exact fixing process should be selected according to the staircase construction and the appropriate installation requirements for the project.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan this profile be used with LVT thicker than 5mm?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied specification identifies the product for 5mm LVT. It does not confirm compatibility with thicker flooring, so using it with a different LVT thickness should not be assumed. Check the actual flooring and profile dimensions before installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat does the bull nose shape provide?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe bull nose shape creates a rounded profile around the exposed front edge of the stair. It provides a defined transition for the LVT installation and can give the completed stair a more structured appearance compared with leaving the flooring edge exposed.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat finish does the aluminium profile have?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile is specified as anodised aluminium with a matt finish. The listed colour options are Silver, Brushed and Bronze. This provides several finish options to consider when coordinating the stair edge with the surrounding LVT and interior design.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this stair nosing suitable for refurbishment projects?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt can be considered for stair refurbishment projects where 5mm LVT is being installed and a screw-fixed aluminium edge profile is required. Before purchasing, the existing stair dimensions and surface construction should be checked against the profile measurements.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes this profile require an underlay?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied product information states that no underlayment is required. However, the suitability of the existing stair surface and the complete installation method should still be assessed before fitting the profile.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow much material is needed for a staircase?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe amount required depends on the width and number of stairs being covered. Since this profile is supplied as an individual 2.7m length, measure each stair carefully and calculate the total required length before ordering. Allowing for cuts and joins can also help with material planning.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rubber Fit Floors","offers":[{"title":"Matt Silver - 37.5 x 35 x 13mm","offer_id":54571993071962,"sku":null,"price":99.98,"currency_code":"GBP","in_stock":true},{"title":"Brushed - 37.5 x 35 x 13mm","offer_id":54571993104730,"sku":null,"price":99.98,"currency_code":"GBP","in_stock":true},{"title":"Bronze - 37.5 x 35 x 13mm","offer_id":54571993137498,"sku":null,"price":99.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/6516\/4890\/files\/s-l300_5ead11a0-04d8-48b9-b9c5-f1b9b8b0fb01.webp?v=1786607569","url":"https:\/\/www.rubberfitfloors.co.uk\/products\/2-7m-aluminium-bull-nose-stair-nosing-stair-edge-profile-edging-trim-for-5mm-lvt","provider":"Rubber Fit Floors","version":"1.0","type":"link"}