{"product_id":"2-7m-aluminium-stair-noding-step-edge-nosing-trim-for-laminate-wood-41x26-6mm-1","title":"2.7m ALUMINIUM STAIR NODING STEP EDGE NOSING TRIM FOR LAMINATE, WOOD.41x26.6mm","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eA Clean Edge Solution for Laminate and Wood Stairs\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe front edge of a stair tread experiences repeated contact as people move between floors, making it an important area for both finishing and practical protection. This 2.7m aluminium stair edge nosing is designed to create a structured edge across suitable stair treads while providing a non-slip surface for everyday foot traffic.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe rigid aluminium construction gives the profile a clean, defined appearance that works particularly well with laminate and wood stair surfaces. Rather than using a flexible trim that simply follows the edge, this type of profile provides a more substantial finish across the leading section of the tread.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 41 x 26.6mm profile size gives the nosing enough coverage to create a noticeable edge treatment without relying on a bulky construction. However, stair dimensions vary considerably, so the profile should always be compared with the available tread and riser area before purchase.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eDesigned to Complement Laminate and Timber Stair Surfaces\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eLaminate and wood stairs can require an edge treatment that complements the existing surface rather than looking out of place. The modern aluminium finish provides a contrasting detail that can work alongside contemporary stair designs while creating a consistent appearance across multiple steps.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile can also help give the front of each tread a clearly defined boundary. This is useful where the stair edge needs to remain visually distinct from the main tread surface, particularly on staircases with repeated daily use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFor laminate installations, the existing covering should be firmly secured before the profile is fitted. With wooden stairs, the condition and thickness of the timber should be checked to make sure there is sufficient material for the intended mechanical fixing. The surface should be stable before installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003e2.7m Length and 41 x 26.6mm Profile\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 2.7m length provides a substantial section of edging that can be measured and prepared for stair applications. A longer profile can reduce the need to work with numerous short sections and allows installers to plan matching pieces for several treads from one continuous length.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 41 x 26.6mm dimensions are important when assessing compatibility. The profile needs to sit correctly across the leading edge without interfering with the riser, adjacent covering or available walking area. Existing laminate or timber thickness can change the amount of space available for installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhere shorter pieces are needed, the aluminium profile can generally be cut using a suitable tool. Careful measuring is particularly important when preparing several sections for the same staircase, as consistent lengths and alignment contribute to a cleaner overall finish.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eNon-Slip Edge Support for Everyday Stair Use\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe non-slip type provides a dedicated grip area at the stair edge, where users naturally place their feet when moving up and down the staircase. Keeping this area clean and free from accumulated dust or debris helps maintain the practical function of the profile during regular use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe aluminium body provides rigidity and helps the nosing maintain a consistent shape once correctly installed. This makes it suitable for staircases where a firm, visible edge profile is preferred.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA stair nosing should not be viewed as a substitute for a suitable stair surface or correct installation. The underlying tread must remain sound, and the profile should be fitted so that it sits securely without creating an unwanted obstruction. Correct positioning is especially important on stairs used frequently throughout the day.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eInstallation with Supplied Screws\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBefore installation, check that the stair edge is clean, stable and suitable for mechanical fixing. Position the aluminium profile along the front of the tread and confirm that the 41 x 26.6mm dimensions sit correctly against the existing surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOnce the alignment has been checked, mark the fixing positions and secure the profile using the supplied screws. The fixing approach should be appropriate for the substrate. Timber, laminate-covered timber and other stair constructions can have different fixing requirements, so the installer should ensure the screws have adequate material to engage securely.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFor multiple steps, use a consistent reference point when positioning each section. This helps maintain a uniform appearance across the staircase. Where the profile needs to be shortened, measure carefully and make clean cuts before final positioning.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAfter installation, routine cleaning can remove dust and debris from the aluminium and non-slip area. Periodic checks of the fixing points are also sensible, particularly on staircases receiving frequent daily traffic. If movement develops, the profile should be inspected and the fixing addressed promptly.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat is this aluminium stair nosing used for?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt is designed to finish the front edge of stair treads while providing a defined non-slip surface. It can be considered for laminate and wood stairs where a neat, rigid edge profile is required. It is designed for edge finishing during installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat are the dimensions of the profile?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile is 2.7 metres long and measures 41 x 26.6mm. These dimensions should be compared with the actual tread and riser area before ordering to confirm a suitable fit. This helps confirm compatibility before purchase.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan it be used with laminate stairs?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The product is specifically suited to laminate applications, provided the stair construction offers an appropriate surface and fixing area. Check the profile dimensions before installation. The surface should remain stable on the staircase.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs it suitable for wooden stairs?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. It can be used with suitable wood stair constructions. The substrate should be sound and capable of accepting the supplied screws securely without damaging the surrounding stair material. Take care around finished timber surfaces where appropriate.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eAre screws included with the profile?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. Screws are included with the set. The installer should confirm that the supplied fixing approach is suitable for the particular stair substrate and installation conditions. Check the substrate before fixing for the application.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the profile have a non-slip surface?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The listed type is non-slip, providing a dedicated grip area along the stair edge. This can help create a more practical tread edge for regular pedestrian movement. Keep the grip area free of debris during regular use.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan the 2.7m profile be cut?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhere shorter sections are required, aluminium profiles can generally be cut with an appropriate tool. Accurate measuring is important before cutting, especially when several stair sections need matching lengths. Measure twice before cutting when preparing sections.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow should this stair nosing be installed?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePosition the profile along the leading edge of a clean, sound tread, check its alignment, mark the fixing points and secure it with suitable screws. The substrate should provide adequate holding support. Alignment should be checked before final fixing.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWill it work with every laminate or wood staircase?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNot necessarily. Stair tread depth, covering thickness, edge construction and available fixing material vary. Measure the staircase and compare it with the 41 x 26.6mm profile before purchasing. Existing coverings can change the available space before final selection.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow should the aluminium stair trim be maintained?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRoutine cleaning can remove dust and debris from the aluminium and non-slip area. Periodically inspect the fixing points and profile condition, particularly on stairs receiving frequent daily foot traffic. Avoid abrasive cleaning methods that could unnecessarily mark the aluminium finish over time.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rubber Fit Floors","offers":[{"title":"Anodised Silver - 270cm x 41mm x 26.6mm","offer_id":54573406159194,"sku":null,"price":50.97,"currency_code":"GBP","in_stock":true},{"title":"Anodised Gold - 270cm x 41mm x 26.6mm","offer_id":54573406191962,"sku":null,"price":50.97,"currency_code":"GBP","in_stock":true},{"title":"Anodised Shampagne - 270cm x 41mm x 26.6mm","offer_id":54573406224730,"sku":null,"price":50.97,"currency_code":"GBP","in_stock":true},{"title":"Anodised Inox - 270cm x 41mm x 26.6mm","offer_id":54573406257498,"sku":null,"price":50.97,"currency_code":"GBP","in_stock":true},{"title":"Anodised Black - 270cm x 41mm x 26.6mm","offer_id":54573406290266,"sku":null,"price":50.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/6516\/4890\/files\/s-l1600_7db4793d-50ea-424d-8826-3f24e9783764.webp?v=1786617679","url":"https:\/\/www.rubberfitfloors.co.uk\/products\/2-7m-aluminium-stair-noding-step-edge-nosing-trim-for-laminate-wood-41x26-6mm-1","provider":"Rubber Fit Floors","version":"1.0","type":"link"}