{"product_id":"3ft-0-9m-stair-edging-self-adhesive-stick-down-edge-nosing-tread-step","title":"3ft (0.9m) - Stair Edging - Self Adhesive Stick Down - Edge Nosing Tread Step","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eA Compact 0.9m Profile for Individual Stair Edges\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis self-adhesive stair edging is supplied in a practical 3ft, or approximately 0.9m, length for finishing stair and step edges. The compact length makes it easier to plan individual sections without starting with an unnecessarily long profile.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBefore installation, measure the full width of the stair edge and compare it with the supplied 0.9m length. Accurate measuring helps determine whether the profile can be fitted as supplied or whether an adjustment may be required. The supplier information does not provide specific cutting instructions, so any alteration should only be made after confirming that the profile can be trimmed appropriately.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSelf-Adhesive Installation for Straightforward Fitting\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe stick-down design uses a self-adhesive fitting method, removing the need to begin with conventional screw fixing based on the supplied product information. This can make installation more straightforward where the existing stair surface is suitable for adhesive contact.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePositioning should be planned carefully before firm pressure is applied. Once the adhesive begins making contact with the stair edge, repeated repositioning may affect the quality of the installation. Checking alignment from both ends before securing the full length can help create a cleaner and more consistent finished edge.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo separate screws, drilling method, or additional mechanical fixing process is specified in the supplied details.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSurface Preparation for Better Adhesive Contact\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA self-adhesive profile depends heavily on the condition of the surface underneath it. Before installation, the stair edge should be cleaned thoroughly so that dust, grease, loose particles, and moisture do not sit between the adhesive backing and the fitting surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe underlying area should also be stable rather than loose or damaged. Applying an adhesive-backed profile over an unsuitable surface can prevent consistent contact along the full length.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSpecific compatible flooring materials have not been provided in the supplier information. For this reason, suitability should be assessed according to the actual stair surface rather than assuming that the edging is appropriate for every flooring material.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSuitable Placement on Stairs and Steps\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied information identifies the edging for use on stairs and steps. Its 0.9m format can work well where individual stair edges require a separate measured section and a stick-down installation method is preferred.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFor a full staircase, calculate the quantity by measuring the width and number of stair edges that need finishing. This is more reliable than estimating from the staircase size because individual steps can vary in width.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe product details do not state a particular domestic, commercial, indoor, or outdoor performance classification. It is therefore best to base the purchasing decision on the stated stair and step suitability and the conditions of the intended installation area.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eRoutine Care After Installation\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOnce fitted, normal care should focus on keeping the stair edge and surrounding area clean and checking periodically that the profile remains properly attached. Dust and debris can be removed as part of routine stair cleaning without unnecessarily disturbing the fitted edge.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePersistent moisture, grease, or contamination around the adhesive contact area should be avoided where possible. If any section begins to lift or move, inspect the installation rather than continuing to leave a loose edge in place.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRegular visual checks are particularly useful on frequently used stairs because they allow movement or loss of adhesion to be identified before it becomes more noticeable.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this stair edging suitable for stairs and steps?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The product is intended for stair and step applications where a self-adhesive stick-down edge profile is appropriate. Check the fitting surface before installation to make sure it suits adhesive fixing.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow long is each stair edging piece?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEach piece is 3ft long, approximately 0.9 metres. Measure the stair width before fitting so you can confirm whether the supplied length matches the required edge.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow is this stair edging installed?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt uses a self-adhesive stick-down method. The stair edge should be clean, dry, stable, and free from dust, grease, or loose debris before the edging is positioned and pressed firmly into place.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes installation require screws?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied details describe a self-adhesive stick-down fitting method, so screws are not listed as part of the intended installation. No separate mechanical fixing instructions are provided.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan the 0.9m length be cut?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplier information does not state a cutting method. If trimming is required, measure carefully and confirm that the edging can be cut appropriately before making any permanent adjustment.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhich surfaces can it be fitted to?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSpecific compatible flooring materials are not listed. The product is described for stairs and steps, so the intended surface should be clean, stable, dry, and suitable for adhesive contact.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs one piece enough for a staircase?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThat depends on the number and width of the stairs. Each piece measures 0.9m, so measure every stair edge and calculate the number of lengths required before fitting.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat preparation is needed before fitting?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRemove dust, moisture, grease, and loose particles from the stair edge. Good surface preparation helps the adhesive backing make consistent contact and supports a cleaner installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs the stair edging supplied new?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The condition is listed as new, meaning it is supplied unused and undamaged as described by the seller. Packaging may vary depending on how the item is supplied.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhere is this stair edging made?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eGermany is listed as the country of origin. No additional material or technical performance details are supplied, so those characteristics should not be assumed.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rubber Fit Floors","offers":[{"title":"Default Title","offer_id":54556813525338,"sku":null,"price":23.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/6516\/4890\/files\/s-l1600_cb792d7d-97ae-4937-a7bb-a6549966a8ce.webp?v=1786440044","url":"https:\/\/www.rubberfitfloors.co.uk\/products\/3ft-0-9m-stair-edging-self-adhesive-stick-down-edge-nosing-tread-step","provider":"Rubber Fit Floors","version":"1.0","type":"link"}