{"product_id":"stair-nosing-15mm-self-adhesive-stick-down-edge-nosing-tread-step-3ft-0-9m","title":"Stair Nosing 15mm - Self Adhesive Stick Down Edge Nosing Tread Step - 3ft (0.9m)","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eA Simple Way to Finish Existing Stair Edges\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis 15mm stair nosing provides a straightforward finishing option for stairs and steps where a compact edge profile is required. Measuring 3ft, or approximately 0.9 metres, in length, it can be compared directly with the width of the intended step before installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile is designed as a self-adhesive, stick-down stair nosing. This makes it particularly useful where a cleaner installation method is preferred without automatically relying on visible screws or other mechanical fixings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBefore fitting, the staircase should be measured carefully so the 15mm depth and 0.9m length can be checked against the actual edge.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhy the 15mm Depth Matters\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe approximate 15mm depth is one of the most important measurements to consider when assessing compatibility. Stair nosing should sit appropriately against the existing edge rather than being selected on overall length alone.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA relatively compact profile can be useful where the aim is to add a finishing edge without introducing an unnecessarily deep section around the stair nose. The exact suitability will depend on the construction and dimensions of the existing step.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMeasure the fitting area before ordering, particularly if several stairs are being covered. Even within the same staircase, individual tread widths can sometimes vary slightly.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSelf-Adhesive Fitting for Prepared Surfaces\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe stick-down installation method allows the nosing to be applied directly to a suitable stair or step surface. Proper preparation is important because adhesive performance depends heavily on the condition of the surface beneath the profile.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe fitting area should be clean, dry and free from dust, grease or loose material. Positioning the nosing before removing the adhesive backing can also help confirm alignment and coverage before permanent contact is made.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOnce correctly positioned, even pressure should be applied along the profile so the adhesive has consistent contact with the intended surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSuitable for Stairs and Steps\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied product information specifies suitability for stairs and steps, making this profile a practical option for applications where the leading edge requires a more finished appearance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eStair edges experience repeated contact during normal use, so a fitted nosing can provide an additional layer around this exposed part of the step. It can also create a cleaner transition between the tread surface and the front edge.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCompatibility should still be checked according to the existing stair material and surface condition. A self-adhesive profile should not be fitted over loose, damaged or contaminated areas without addressing the underlying issue first.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eMaintaining the Stick-Down Stair Trim\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRoutine cleaning helps prevent dirt and debris from building up around the stair edge. A soft cloth, brush or other suitable non-abrasive cleaning method can be used according to the material and finish of the actual profile.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe adhesive connection should also be checked periodically, especially on stairs receiving frequent foot traffic. Any lifting or movement should be addressed rather than allowing the profile to remain partially detached.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eKeeping the surrounding stair surface clean and dry can also help maintain a tidy installation and reduce unnecessary stress around the fitted edge.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat is the length of this stair nosing?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe stair nosing measures approximately 3ft, which is equivalent to 0.9 metres. Measure the width of the intended stair before installation so you can confirm whether the supplied length is suitable or requires adjustment.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat is the depth of the stair nosing?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe stated depth is approximately 15mm. This measurement should be checked against the existing stair edge because profile compatibility depends on how the nosing sits around the intended fitting area.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this stair nosing self-adhesive?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The product is described as self-adhesive and stick-down, allowing it to be fitted to a suitable prepared surface without assuming that additional screw fixings are required.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat surfaces can it be used on?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied information confirms suitability for stairs and steps but does not specify individual surface materials. Check the actual staircase surface and adhesive compatibility before fitting the profile permanently.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDoes the surface need preparation before fitting?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The intended area should be clean, dry and free from grease, dust and loose debris. Proper preparation gives the adhesive a better opportunity to make consistent contact with the stair surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eShould I measure every stair separately?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. Measuring each step can be useful because widths may vary slightly, particularly on older staircases. Accurate measurements also help determine whether cutting or adjustment will be required.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan the 0.9m profile be cut shorter?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied information does not provide specific cutting instructions. If shortening is required, inspect the actual profile first and use an appropriate method for its construction rather than assuming how it should be cut.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this suitable for both stairs and individual steps?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The supplied specifications list stairs and steps as the intended applications. Final suitability still depends on the dimensions, condition and surface of the area where the nosing will be installed.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow should the stair nosing be maintained?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eKeep the profile and surrounding edge free from dust and debris using suitable non-abrasive cleaning methods. Periodically check that the adhesive remains secure and address any lifting or movement promptly.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs the product supplied new?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The stated condition is new, meaning the item is unused and undamaged. Packaging may differ depending on how the product is supplied, including the possibility of plain non-retail packaging.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rubber Fit Floors","offers":[{"title":"Silver – 3ft x 15mm x  0.9m","offer_id":54537729540442,"sku":null,"price":22.48,"currency_code":"GBP","in_stock":true},{"title":"Brass – 3ft x 15mm x  0.9m","offer_id":54537729573210,"sku":null,"price":22.48,"currency_code":"GBP","in_stock":true},{"title":"Grey – 3ft x 15mm x  0.9m","offer_id":54537729605978,"sku":null,"price":22.48,"currency_code":"GBP","in_stock":true},{"title":"Bronze – 3ft x 15mm x  0.9m","offer_id":54537729638746,"sku":null,"price":22.48,"currency_code":"GBP","in_stock":true},{"title":"Black – 3ft x 15mm x  0.9m","offer_id":54537729671514,"sku":null,"price":22.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/6516\/4890\/files\/s-l1600_f14658aa-5d67-4d0c-a198-0a1d11109dd2.webp?v=1786194195","url":"https:\/\/www.rubberfitfloors.co.uk\/products\/stair-nosing-15mm-self-adhesive-stick-down-edge-nosing-tread-step-3ft-0-9m","provider":"Rubber Fit Floors","version":"1.0","type":"link"}