{"product_id":"stair-nosing-anodised-aluminium-anti-non-slip-edge-40mm-x-20mm-2m-78-74","title":"Stair Nosing Anodised Aluminium Anti Non Slip Edge 40mm x 20mm - 2M (78.74\"),","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eA Defined Edge for Longer Stair Runs\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis 2m aluminium stair nosing is designed for stair edges where a longer continuous profile is required. With a 40mm x 20mm profile, it provides clearly stated dimensions that can be checked against the tread and front edge before installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe longer 2m format can be useful where individual stair sections, wider steps or multiple cut lengths need to be planned from one profile. Accurate measuring remains important because stair dimensions and installation requirements can differ considerably between properties.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIts rigid aluminium construction creates a structured edge rather than the flexible finish associated with softer trims, making it suitable for projects where a clean and clearly defined stair nose is preferred.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhy the 40mm x 20mm Profile Matters\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 40mm x 20mm measurement is an important part of determining whether this nosing suits a particular staircase. Length alone does not establish compatibility; the shape and size of the edge profile must also correspond appropriately with the existing step.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA 40mm section provides a defined area around the stair edge, while the 20mm dimension determines how the profile continues around its intended fitting position. These measurements should be compared directly with the staircase before any cutting or installation work begins.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eChecking dimensions beforehand also helps avoid selecting a profile that is unnecessarily large or too small for the intended application.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAnodised Aluminium for a Practical Stair Finish\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe stair nosing is manufactured from aluminium with an anodised surface finish. Aluminium provides the rigidity required for a well-defined stair edge while remaining practical for use as a trim profile.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAnodising treats the aluminium surface and gives the profile a more finished appearance. This is useful where stair edging needs to serve a functional role without creating an unfinished metal look.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe material can be suitable for different indoor environments because the supplied product information identifies it for use in any room. Actual compatibility should still be determined by the staircase material, dimensions and intended installation method.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAnti-Slip Support at the Leading Edge\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile is described as an anti-slip stair nosing, placing additional emphasis on the part of the stair where footwear makes regular contact. The leading edge naturally receives repeated use during movement up and down a staircase, making its surface condition particularly important.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA dedicated nosing provides a clearly defined contact area while also covering the exposed front edge of a suitable step. This can support a more finished stair arrangement while adding the intended anti-slip surface characteristic.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe nosing should still form part of a properly maintained staircase. Dirt, moisture or loose debris should be removed regularly, and any movement in the fitted trim should be investigated promptly.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eMeasuring and Planning a 2m Profile\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe full profile measures 2 metres, equivalent to approximately 78.74 inches. Before installation, the required lengths should be measured carefully so the available material can be planned efficiently.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhere the profile needs to be divided into shorter sections, each stair should be measured individually rather than assuming that all treads have identical dimensions. Older staircases in particular can have small differences from one step to another.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied information does not specify a fixing method, so it should not be assumed that this nosing is self-adhesive, screw-fixed or installed using another particular system. The profile and staircase should be assessed before choosing an appropriate method.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eKeeping the Stair Nosing Clean and Secure\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRoutine care can help maintain both the appearance of the anodised aluminium and the condition of the stair edge. Loose dirt and dust can be removed with a soft cloth or brush, while further cleaning should use products appropriate for anodised aluminium.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAbrasive cleaners or harsh tools should be avoided unless confirmed suitable for the surface finish. Scratching or unnecessary abrasion can affect the appearance of the profile over time.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe nosing should also be inspected periodically once fitted. Any movement, damage or deterioration around the stair edge should be addressed so the profile remains properly positioned during everyday use.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat is the full length of this stair nosing?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe aluminium profile measures 2 metres in total, which is approximately 78.74 inches. Its longer format allows the available length to be planned according to the staircase, but every required section should be measured carefully before cutting or installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat are the profile dimensions?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe stated profile size is 40mm x 20mm. These dimensions should be compared with the tread and front edge of the intended staircase because profile compatibility depends on more than the overall 2m length.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat material is the stair nosing made from?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe stair nosing is made from aluminium. This provides a rigid and clearly defined profile around a compatible stair edge and is useful where a structured trim is preferred to a flexible edging material.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat does an anodised finish mean for this profile?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe aluminium has an anodised surface treatment. This provides a finished appearance to the metal profile and is commonly used where aluminium edging needs a clean, practical surface for everyday interior applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this an anti-slip stair nosing?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The product is described as an anti-slip stair nosing. It creates a dedicated surface around the leading edge of the step, although regular cleaning and proper installation remain important for maintaining the staircase.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan the 2m length be divided for individual steps?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA longer aluminium profile may be suitable for dividing into required sections where appropriate. However, specific cutting instructions are not included in the supplied information, so the actual profile should be assessed before permanent modification.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan it be used in different rooms?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied product information states that it is suitable for any room. Final suitability should still be assessed according to the staircase material, environmental conditions and installation requirements of the intended location.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow is this stair nosing installed?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA specific installation method has not been provided. It should therefore not be assumed to use adhesive, screws or another particular fixing system. The actual profile and stair surface should be checked before choosing a suitable installation method.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eShould each stair be measured separately?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. Measuring individual steps is recommended, particularly when cutting a 2m profile into several sections. Stair widths can vary slightly, and accurate measurements can help produce a more consistent finished installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow should anodised aluminium stair nosing be maintained?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRemove dust and loose debris as part of normal staircase cleaning and use non-abrasive methods appropriate for anodised aluminium. The installed profile should also be checked periodically for movement or damage around the stair edge.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rubber Fit Floors","offers":[{"title":"Gold – 2M × 40 × 20 mm","offer_id":54537240084826,"sku":null,"price":37.48,"currency_code":"GBP","in_stock":true},{"title":"Silver – 2M × 40 × 20 mm","offer_id":54537240117594,"sku":null,"price":37.48,"currency_code":"GBP","in_stock":true},{"title":"Champagne – 2M × 40 × 20 mm","offer_id":54537240150362,"sku":null,"price":37.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/6516\/4890\/files\/s-l1600_d31178ea-bc46-4611-939c-640c9a166202.webp?v=1786184259","url":"https:\/\/www.rubberfitfloors.co.uk\/products\/stair-nosing-anodised-aluminium-anti-non-slip-edge-40mm-x-20mm-2m-78-74","provider":"Rubber Fit Floors","version":"1.0","type":"link"}