{"product_id":"stair-nosing-anodised-aluminium-anti-non-slip-edge-trim-30-x-30-mm-0-9m-35-43","title":"STAIR NOSING ANODISED ALUMINIUM ANTI NON SLIP EDGE TRIM 30 x 30 mm - 0.9M 35.43\"","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eClean Aluminium Finish for Stair Edges\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis anodised aluminium stair nosing is designed to provide a neat and practical finish along the front edge of a suitable step. Its 30 x 30mm profile gives equal coverage across the upper section and the vertical face of the stair edge, while the 0.9m length makes it suitable for steps that match or can accommodate a 900mm trim.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe aluminium construction creates a firm metal profile rather than a flexible edge. This can be useful where a compact stair trim is preferred for finishing exposed stair corners and creating a more consistent appearance across a staircase.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe anodised surface also gives the aluminium a cleaner finished appearance. Before installation, the dimensions of the stair should be checked carefully to make sure the 30 x 30mm profile and 900mm length are appropriate for the intended step.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow the 30 x 30mm Profile Fits Around a Step\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe equal-sided 30 x 30mm shape is one of the key characteristics of this stair nosing. One section sits over the upper edge of the step, while the other extends down the front face. This creates a balanced profile around the corner without using an especially deep front section.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFor buyers comparing different stair nosing sizes, the profile dimensions are just as important as the overall length. A nosing that is too large or too small for the stair edge may not sit as intended, particularly where an existing floor covering changes the finished dimensions of the step.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMeasuring the actual stair edge before ordering can therefore help avoid fitting problems. Existing carpet, laminate, vinyl, tile, wood or other floor finishes should also be considered, although the supplied product details do not confirm specific compatibility with any particular flooring material.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAnti-Slip Edge for Everyday Stair Use\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe product is described as an anti-slip stair nosing, making it relevant where additional traction around the leading edge of the step is an important consideration. Stair edges experience repeated foot contact, so the front section of the step is often one of the areas where grip and a secure finish matter most.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe nosing combines this anti-slip function with the practical role of covering the stair edge. This can help create a cleaner transition between the tread and front face while maintaining a relatively compact aluminium profile.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied information does not provide laboratory slip-resistance ratings or specific performance figures. For this reason, the product should be selected according to the stated anti-slip feature, dimensions and intended installation rather than assuming performance standards that have not been provided.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003ePractical 900mm Length for Suitable Staircases\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe total length of this stair nosing is 0.9m, equivalent to 900mm or approximately 35.43 inches. This measurement should be compared directly with the width of the intended step before ordering.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf the stair is narrower than 900mm, adjustment may be required. If it is wider, a different length may be more appropriate if full-width coverage is required. The supplied information does not provide cutting instructions, so any modification should be carried out using tools and methods suitable for aluminium.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCareful measurement is particularly useful when several stair nosings are being installed on the same staircase. Checking individual steps can help identify small differences in width that might otherwise affect the finished result.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSuitable Placement and Installation Considerations\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied specifications list the nosing for use in any room, allowing it to be considered for suitable interior staircases across different areas of a property. Its simple aluminium appearance can suit spaces where a functional metal stair edge is preferred over a softer PVC or rubber profile.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo particular fixing system is identified in the supplied details. Screws, adhesive or other fixing accessories should therefore not be assumed to be included. The appropriate installation method will depend on the stair substrate, surrounding floor finish and installation requirements.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBefore fitting, the stair surface should be checked for stability and suitable dimensions. Correct positioning is especially important around the leading edge, as the nosing should sit consistently without unwanted movement after installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eMaintaining the Anodised Aluminium Surface\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRoutine maintenance is straightforward and should focus on keeping the visible aluminium surface free from dust, grit and general debris. A soft cloth or other non-abrasive cleaning method can be used for regular care.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAvoid harsh abrasive materials that could unnecessarily mark the anodised finish. If a specialist cleaning solution is required, check that it is compatible with anodised aluminium before applying it across the trim.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe installed nosing should also be checked periodically to ensure it remains securely positioned. This is particularly useful on frequently used staircases where repeated foot traffic can place ongoing demands on the stair edge and its fixings.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat are the dimensions of this stair nosing?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe stair nosing has a 30 x 30mm profile and an overall length of 0.9m. This is equivalent to 900mm or approximately 35.43 inches. Both the profile dimensions and the total stair width should be checked before ordering to make sure the trim suits the intended installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat does a 30 x 30mm stair nosing profile mean?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 30 x 30mm measurement refers to the two sides of the profile that sit around the stair edge. One section covers the upper area near the tread edge, while the other extends down the front face. The equal dimensions create a compact and balanced shape around a suitable stair corner.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this stair nosing made from aluminium?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The supplied specifications confirm that the nosing is made from aluminium. This gives the trim a firm metal structure around the stair edge. It also has an anodised finish, which creates a cleaner finished surface than untreated aluminium while maintaining the practical characteristics of the metal profile.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this an anti-slip stair edge trim?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The supplied product title specifically describes the nosing as anti-slip. This makes it suitable for buyers looking for a stair edge profile that combines aluminium edging with additional traction around the leading part of the step. No specific slip-resistance rating is provided in the supplied information.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan the stair nosing be used in different rooms?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The supplied specifications list its room suitability as “Any Room”. Actual installation suitability still depends on the staircase dimensions, floor finish and selected fixing method. These practical details should be checked before fitting to make sure the profile is appropriate for the specific stair environment.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs the 900mm length suitable for every step?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo. Stair widths can vary, so the 900mm length should always be measured against the actual step. A narrower staircase may require adjustment, while a wider step may need a different length if complete edge coverage is required. Measuring before ordering helps reduce the risk of choosing an unsuitable size.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan this stair nosing be used on carpeted stairs?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied product information does not specifically confirm suitability for carpet. Compatibility will depend on the carpet thickness, underlay, stair construction and installation method. The finished edge should be measured carefully before selecting this 30 x 30mm profile for a carpeted staircase.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eAre fixings supplied with the aluminium nosing?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied details do not state that screws, adhesive or any other fixing accessories are included. Installation requirements vary according to the stair substrate and surrounding floor finish. Suitable fixings should therefore be selected separately if required rather than assuming that a particular fixing method comes with the product.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow should anodised aluminium stair nosing be cleaned?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRegular dust and loose dirt can normally be removed with a soft, non-abrasive cloth. Harsh scrubbing materials should be avoided where possible because they may mark the visible surface. Any cleaning solution used should first be checked for compatibility with anodised aluminium.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat should I measure before purchasing this nosing?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMeasure the full width of the step as well as the dimensions around its front edge. This product measures 900mm in length and has a 30 x 30mm profile. Existing flooring should also be considered because carpet, laminate, vinyl or other finishes may change the final dimensions around the stair edge.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rubber Fit Floors","offers":[{"title":"Gold - 30 × 30mm - 0.9M","offer_id":54554489422170,"sku":null,"price":25.96,"currency_code":"GBP","in_stock":true},{"title":"Silver - 30 × 30mm - 0.9M","offer_id":54554489454938,"sku":null,"price":25.96,"currency_code":"GBP","in_stock":true},{"title":"Champagne - 30 × 30mm - 0.9M","offer_id":54554489487706,"sku":null,"price":25.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/6516\/4890\/files\/s-l1600_a52cd2ba-5a99-42cc-96c2-e4b623f9229d.webp?v=1786429091","url":"https:\/\/www.rubberfitfloors.co.uk\/products\/stair-nosing-anodised-aluminium-anti-non-slip-edge-trim-30-x-30-mm-0-9m-35-43","provider":"Rubber Fit Floors","version":"1.0","type":"link"}