{"product_id":"wood-laminate-edging-silver-square-edge-900mm-m133-stair-edge-nosing-9mm","title":"Wood \u0026 Laminate Edging Silver - Square Edge 900mm M133 (Stair Edge Nosing 9mm)","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eA Clean Finish for Wood and Laminate Steps\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis silver stair nosing is designed to create a defined finish around compatible wood and laminate stair edges. It can help cover the exposed transition where flooring meets the front of a step, giving the completed staircase a cleaner and more coordinated appearance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe square-edge design is suitable for projects where a straight, structured profile is preferred. Its silver colour provides a neutral contrast against many light, dark and wood-effect floor finishes, although an exact visual match with existing trims or fittings cannot be guaranteed.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eUnderstanding the Square-Edge Profile\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA square-edge stair nosing is intended to follow a clearly defined step corner rather than a rounded or bullnose edge. The stair surface should therefore be checked carefully to confirm that the profile can sit correctly against both the horizontal tread and the exposed front section.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe shape of an existing stair edge can vary according to the flooring system, underlay and stair construction. A profile that does not sit level may leave gaps or raised sections, so compatibility should be confirmed before permanent installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eChecking the 900mm Length and 9mm Size\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile is listed as 900mm long, making it suitable for stair edges that fall within this measurement or can be completed after accurate trimming. Each step should be measured separately because stair widths may vary, particularly in older or altered properties.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe product title also identifies a 9mm measurement, but the supplied details do not clarify whether this refers to the internal flooring allowance, profile height or another part of the trim. This measurement should be confirmed against the physical profile before ordering for a specific flooring thickness.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eInstallation Details to Confirm\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe available product information does not specify whether adhesive, screws or other fixings are included. It also does not provide a recommended installation method. The correct approach will depend on the stair substrate, flooring construction and design of the profile.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBefore fitting, the stair edge should be clean, level and free from loose flooring material. Where cutting is required, appropriate tools should be used to avoid damaging the visible silver finish or leaving sharp, uneven ends. Professional fitting may be preferable where accurate alignment cannot be achieved confidently.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eCleaning and Routine Inspection\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eLoose dust and grit should be removed regularly using a soft cloth or brush. A mild cleaning product may be used once the profile material and finish requirements have been confirmed, but abrasive tools and harsh chemicals should be avoided because they may scratch or dull the silver surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe stair nosing should also be inspected periodically after installation. Any lifting, movement or loose fixing should be addressed promptly, as an unsecured profile may interfere with normal stair use and affect the quality of the finished edge.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat type of flooring is this stair nosing intended for?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe product is described as an edging profile for compatible wood and laminate flooring. Suitability still depends on the thickness of the flooring, shape of the stair edge and available fitting area. Check all relevant dimensions before ordering rather than assuming that every wood or laminate staircase uses the same profile.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow long is the silver stair nosing?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe profile has a listed length of 900mm. Measure the complete width of every intended step before ordering because staircase dimensions can vary. Where the stair is narrower than 900mm, the profile may need to be trimmed carefully while protecting the visible finish and maintaining a clean, straight end.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat does the 9mm measurement refer to?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplier title includes a 9mm measurement, but the available specifications do not explain whether it represents the flooring allowance, profile height or another dimension. Buyers should confirm the full profile measurements before using it with 9mm flooring or purchasing it as a replacement for an existing stair trim.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this profile made from aluminium?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe construction material is not stated in the supplied product details. The silver colour alone does not confirm whether the profile is made from aluminium, steel, another metal or a coated alternative. Material should be verified before selecting cutting tools, cleaning products, adhesives or mechanical fixings.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eAre screws or adhesive included with the nosing?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe package contents and fixing accessories are not identified in the available specifications. Do not assume that screws, plugs, adhesive or mounting strips are supplied. The appropriate fixing system should be selected according to the actual profile construction and the material beneath the wood or laminate flooring.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan this stair nosing be cut to fit a narrower step?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 900mm profile may potentially be shortened, but cutting instructions and material details have not been provided. Confirm the construction before selecting a tool, measure the step accurately and protect the visible silver surface during cutting. Any sharp or uneven end should be properly finished before installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWill the silver colour match my existing flooring accessories?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAn exact match cannot be guaranteed because silver flooring trims can vary in tone, texture and sheen. The profile should be compared with existing door bars, stair trims and nearby fittings where visual consistency is important. Lighting and surrounding floor colours may also affect how the silver finish appears after installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs the square-edge profile suitable for rounded stairs?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA square-edge profile is generally intended for a clearly defined stair corner, but the exact internal shape and dimensions are not supplied. It should not be forced over a rounded or incompatible edge. Compare the stair shape with the complete profile before fitting and seek professional advice where adaptation would be required.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rubber Fit Floors","offers":[{"title":"Default Title","offer_id":54480599515482,"sku":null,"price":39.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/6516\/4890\/files\/s-l1600_029f272a-724c-4eb4-805f-3e73aa773891.webp?v=1785220193","url":"https:\/\/www.rubberfitfloors.co.uk\/products\/wood-laminate-edging-silver-square-edge-900mm-m133-stair-edge-nosing-9mm","provider":"Rubber Fit Floors","version":"1.0","type":"link"}