• 14 Steps

• 60cm Width

• 7m Runner Length

• Black and White Herringbone Pattern

• Polypropylene Carpet Runner for Hallway Staircases

A Defined Herringbone Finish for the Staircase

This black and white carpet stair runner combines a traditional herringbone pattern with a narrow 60cm format designed for hallway staircases. The contrasting woven appearance creates a defined central feature while allowing part of the staircase to remain visible along both sides.

The pattern is suitable for interiors where a plain carpet may feel too simple but a heavily decorated design would be difficult to coordinate. Its black and white colouring works particularly well with painted, stained or natural wooden stairs and can also complement neutral hallway walls and flooring.

As the runner is supplied in a continuous 7-metre length, it can be measured and cut according to the dimensions of the individual staircase. This makes it more adaptable than separate stair mats where visible gaps may appear between each step.

Understanding the 7m Length and 60cm Width

The runner measures 7.00 metres long and 0.60 metres wide. The 60cm width is intended to sit through the centre of the staircase, leaving an exposed section on either side. The exact border width will depend on the overall width of the stairs and how centrally the runner is positioned.

A 7-metre runner may provide enough material for up to 14 standard steps, but stair dimensions are not identical in every property. The depth of each tread, the height of each riser and any additional material required for securing or finishing the runner will affect the total length needed.

Measuring the full staircase before cutting is therefore important. Each tread and riser should be measured separately, particularly on older stairs where dimensions may vary slightly from one step to another.

Polypropylene Construction for Everyday Interior Use

The runner is made from polypropylene, also known as olefin. This synthetic carpet fibre is commonly chosen for household flooring because it provides a practical surface for areas exposed to regular foot traffic.

Its carpeted finish gives the staircase a softer appearance than exposed timber or hard flooring. It can also make the steps feel more comfortable underfoot during normal household use.

The material is intended for indoor hallway environments. It should be kept away from continuously wet areas and should not be treated as an outdoor stair covering. Any moisture or spills should be addressed promptly to protect both the runner and the surface underneath.

The Berber-influenced appearance adds visible texture without relying on a deep or highly decorative pile. This helps the herringbone pattern remain the main visual feature when installed along the staircase.

Planning the Fit Across Fourteen Steps

Although the runner is described as suitable for 14 steps, this figure should be treated as an estimated coverage guide rather than a guaranteed fit for every staircase. A step with a deep tread or tall riser will use more material than a compact standard step.

Measuring Before the Runner Is Cut

To estimate the required length, measure from the back of one tread, over its front edge and down the full riser. Multiply this measurement by the number of steps and include a reasonable allowance for positioning, trimming and securing the ends.

The measurement should also account for any curved stair edges, winders or landings. A straight staircase is generally easier to plan than a staircase with turns or irregularly shaped steps.

Cutting should only begin once the full layout has been checked. Removing too much material at the beginning can leave insufficient length for the upper steps or finishing points.

Fitting Considerations for a Secure Result

A continuous stair runner needs to be fixed correctly so that it follows the shape of each tread and riser without loose sections. The most appropriate installation method will depend on the staircase material, the condition of the existing surface and the intended finish.

Carpet grippers, underlay, stair rods or other fixings may be used depending on the chosen installation method. These accessories are not confirmed as included and should be checked separately before fitting begins.

A suitable underlay may improve the finished feel and help the runner sit more evenly, but it must be compatible with stair use and installed without creating raised or unstable edges. Where there is uncertainty, professional carpet fitting is the safer option, particularly on stairs with turns, uneven surfaces or complex finishing requirements.

The existing staircase should be clean, dry and structurally sound before installation. Loose boards, protruding fixings or damaged edges should be repaired before the carpet runner is positioned.

Cleaning and Maintaining the Pattern

Regular vacuuming will help remove dust, fibres and small particles that collect through everyday hallway use. A suitable upholstery or stair attachment can make it easier to clean along the edges and where the tread meets the riser.

Spills should be blotted rather than rubbed, as rubbing may spread the mark further into the fibres. Any cleaning product should first be tested on a small, less visible section to check its effect on the colour and material.

The exposed staircase edges should also be cleaned periodically so that dust does not build up beside the runner. Routine care will help the black and white pattern remain clearly defined and keep the staircase looking consistent from top to bottom.

Frequently Asked Questions

Will the 7-metre runner fit exactly 14 stairs?

It is described as suitable for up to 14 standard steps, but the exact coverage depends on the depth of the treads and the height of the risers. Measure the complete staircase and include extra material for positioning, cutting and finishing before confirming suitability.

Is the stair runner supplied as separate pieces?

No. It is supplied as one continuous carpet runner measuring 7.00 metres long and 0.60 metres wide. The runner can be measured and cut during installation to suit the staircase layout.

How much of the staircase will remain visible?

That depends on the width of the staircase. A 60cm runner installed centrally will leave an equal exposed border on each side when the stairs are wider than the runner. Measuring the stair width will show the approximate border before fitting.

Is this runner suitable for curved or winding stairs?

It may be possible to install it on some winding staircases, but irregularly shaped steps require more careful measuring, cutting and alignment. Professional fitting is advisable where the staircase includes turns, curves or tapered treads.

Are stair rods or fitting accessories included?

The supplied information does not confirm that stair rods, grippers, underlay or other installation accessories are included. Any required fittings should be selected separately according to the staircase and chosen installation method.

Can the polypropylene runner be cut to size?

Polypropylene carpet can normally be cut during installation, but the edges must be measured and finished carefully to reduce fraying or uneven lines. Suitable carpet-cutting tools and an accurate layout are recommended.

Is this runner suitable for outdoor stairs?

No. The material and runner format are intended for indoor hallway staircases. It should not be installed in uncovered outdoor areas or locations exposed to persistent rain and moisture.

How should the carpet stair runner be cleaned?

Vacuum it regularly using an attachment suitable for stairs. Deal with spills promptly by blotting the affected area and use only cleaning products compatible with polypropylene carpet. Always test a product on a discreet area first.

At Rubber Fit Floors, we are committed to delivering your orders efficiently and securely to your doorstep. Here’s everything you need to know about our shipping process:

1. Shipping Destinations
We currently ship to the United Kingdom, covering all regions including mainland UK, Northern Ireland, and the Scottish Highlands. If you’re located outside the UK, please get in touch with us to discuss custom shipping options.

2. Processing Time

An order confirmation email does not constitute acceptance of your order. Acceptance occurs only when the order has been dispatched. All orders are processed within 1–2 business days.
Orders placed on weekends or holidays will be processed on the next working day.

3. Delivery Time
Standard Delivery: 3–5 business days.
Express Delivery: 1–2 business days (available at an additional charge).
Delivery times are estimates only and not guaranteed. We are not liable for delays caused by couriers or external factors.

4. Shipping Charges
Standard Delivery: £7.99 (Free for orders over £100).
Express Delivery: £24.95.
For bulky or custom orders, shipping charges will be calculated based on the weight and dimensions of your package.

5. Tracking Your Order
Once your order is dispatched, you will receive an email with a tracking link to monitor your shipment. If you do not receive this information, please contact our support team.

6. Damaged or Lost Shipments
If your order arrives damaged or is delayed beyond the expected delivery time, kindly reach out to us immediately. We will assist you with replacements, refunds, or further inquiries.

7. Contact Us
For any shipping-related questions, feel free to contact our customer support:
📧 Email: procurement@rubberfitfloors.co.uk
📞 Phone: 07404270642
Address: 9 Fiveacre Close, Thornton Heath, CR7 6AS