• 900mm Length

• Matt Aluminium Finish

• Black Anti-Slip Rubber Insert

• Concealed Fixings with Screws Supplied

• Protective Stair Edge Profile for Wood, Carpet and Other Floors

A Clean, Protective Finish for Stair Edges

Exposed stair edges can begin to look worn where regular foot traffic repeatedly contacts the same area. This 900mm aluminium stair nosing provides a defined protective profile across the front of a step, helping create a cleaner transition between the tread and riser. Its modern matt finish offers a practical appearance that can work with domestic staircases, office interiors and other indoor areas where a neat finish is important. The aluminium construction also gives the profile a firm structure without creating an unnecessarily bulky edge. Before installation, the stair should be measured carefully to confirm that the 38.5mm width and 19.5mm height are appropriate for the intended step and floor covering.

Grooved Aluminium with Added Rubber Traction

The upper surface combines a grooved aluminium profile with a black anti-slip rubber insert. This creates a more clearly defined contact area at the front of the step, where footwear is most likely to make contact when someone moves up or down the staircase. The rubber section is intended to improve traction, while the aluminium body supports the edge and provides a consistent finish across the 900mm length. Although the insert can support safer footing, it should not be treated as a substitute for proper stair maintenance. Dust, loose flooring, moisture and poorly secured trims can still affect safety, so the nosing should be kept clean and checked periodically for movement.

Suitable for Wood, Carpet and Other Floor Finishes

This stair edge trim is intended for use with different flooring types, including wooden and carpeted steps. On wooden stairs, it can provide a finished edge while helping protect the most frequently contacted part of the tread. When used with carpet, the profile can help define and secure the transition at the stair nose, provided the carpet thickness and underlying structure are compatible with the trim. It may also suit other flooring finishes where the dimensions and fixing method are appropriate. The profile should always be attached to a firm, stable base rather than depending on a loose floor covering for support. Checking the complete stair build-up before installation helps achieve better alignment and a more secure result.

Concealed Screw Fixings for a Neater Installation

Fixing screws are supplied with the stair nosing, allowing the aluminium profile to be mechanically secured to the step. The concealed fixing arrangement helps keep visible hardware to a minimum, giving the fitted edge a more continuous and professional appearance. Correct positioning is important because an uneven profile or poorly placed screw can leave the trim unstable underfoot. The stair surface should be clean, level and structurally suitable before installation begins. The supplied fixings should also be checked against the base material, as timber, masonry and composite stair structures may require different preparation or suitable anchors to achieve a dependable installation.

Practical Maintenance and Fit Considerations

Routine care is straightforward because both the aluminium profile and rubber insert can be cleaned without specialist maintenance. Loose grit should be removed regularly, as accumulated debris can affect traction and may mark the matt surface. A lightly damp cloth and a mild cleaner suitable for aluminium and rubber can be used for general cleaning, followed by drying around the profile and fixing points. The trim should also be inspected occasionally to confirm that it remains level and securely attached. Before ordering, measure the full stair width as well as the tread and riser dimensions, since the supplied profile is 900mm long, 38.5mm wide and 19.5mm high.

Frequently Asked Questions

Is this stair nosing suitable for carpeted steps?

It can be used with carpeted stairs when the profile dimensions, carpet thickness and fixing surface are compatible. The trim should be secured into a firm stair edge rather than relying on the carpet alone for support. Check that the 38.5mm width and 19.5mm height sit correctly before drilling or fixing the profile in place.

Does the rubber insert make the step completely slip-proof?

The black rubber insert is designed to add traction at the stair edge, but no stair nosing can make every step completely slip-proof in all conditions. Dust, moisture, loose flooring and unsuitable footwear can still affect grip. Keep the surface clean, inspect the fixing points regularly and address any movement as soon as it appears.

Are the installation screws included with the trim?

Yes. Fixing screws are supplied with the single 900mm stair nosing profile. The concealed fixing design helps keep the finished surface neat once installation is complete. Before fitting, confirm that the supplied screws are appropriate for the stair substrate, as timber, masonry and other base materials may require different preparation or anchors.

What size is this aluminium stair edge profile?

The profile is listed as 900mm long, approximately 38.5mm wide and 19.5mm high. These measurements should be checked against the tread and riser area of the intended step before purchase. Measuring the stair edge carefully helps avoid poor alignment, an exposed gap or interference with doors and surrounding floor finishes.

Can this stair nosing be fitted over wooden flooring?

The trim is suitable for wooden flooring when the stair edge is solid, level and able to accept secure screw fixings. The matt aluminium profile protects the exposed edge, while the rubber insert adds a defined contact area underfoot. Always check for hidden pipes, cables or unsuitable substrates before drilling into an existing staircase.

How should the aluminium and rubber surface be cleaned?

For routine care, remove loose dust and grit, then wipe the aluminium and rubber surfaces with a lightly damp cloth and a mild cleaner suitable for both materials. Avoid aggressive abrasives that may mark the matt finish or damage the rubber insert. Dry the profile after cleaning so moisture does not remain around the fixings or stair edge.

At Rubber Fit Floors, we are committed to delivering your orders efficiently and securely to your doorstep. Here’s everything you need to know about our shipping process:

1. Shipping Destinations
We currently ship to the United Kingdom, covering all regions including mainland UK, Northern Ireland, and the Scottish Highlands. If you’re located outside the UK, please get in touch with us to discuss custom shipping options.

2. Processing Time

An order confirmation email does not constitute acceptance of your order. Acceptance occurs only when the order has been dispatched. All orders are processed within 1–2 business days.
Orders placed on weekends or holidays will be processed on the next working day.

3. Delivery Time
Standard Delivery: 3–5 business days.
Express Delivery: 1–2 business days (available at an additional charge).
Delivery times are estimates only and not guaranteed. We are not liable for delays caused by couriers or external factors.

4. Shipping Charges
Standard Delivery: £7.99 (Free for orders over £100).
Express Delivery: £24.95.
For bulky or custom orders, shipping charges will be calculated based on the weight and dimensions of your package.

5. Tracking Your Order
Once your order is dispatched, you will receive an email with a tracking link to monitor your shipment. If you do not receive this information, please contact our support team.

6. Damaged or Lost Shipments
If your order arrives damaged or is delayed beyond the expected delivery time, kindly reach out to us immediately. We will assist you with replacements, refunds, or further inquiries.

7. Contact Us
For any shipping-related questions, feel free to contact our customer support:
📧 Email: procurement@rubberfitfloors.co.uk
📞 Phone: 07404270642
Address: 9 Fiveacre Close, Thornton Heath, CR7 6AS