A Defined Finish for Wood and Carpeted Steps

The exposed front edge of a stair can become worn through regular foot traffic, particularly where wood, carpet or another floor covering meets the edge of the step. This 900mm aluminium stair nosing provides a structured finish that helps cover and protect this vulnerable area.

Its modern matt aluminium surface gives the staircase a clean appearance without introducing an overly reflective finish. The black rubber insert creates a visible contrast across the top of the profile, making the step edge easier to identify against many common flooring colours.

The profile is intended for wood, carpet and other compatible flooring types. The existing stair surface must still be stable, level and suitable for mechanical fixing before installation begins.

Grooved Profile with a Black Rubber Insert

The stair nosing measures approximately 38.5mm across the upper face and 19.5mm down the front section. This shape allows the profile to sit around the outer edge of the step while leaving most of the original tread surface visible.

A black rubber insert is fitted into the grooved upper section. The textured insert provides additional grip around the area where footwear commonly contacts the stair edge, while the aluminium body protects the surrounding flooring transition.

The rubber surface should be kept free from dust, grease and moisture because surface contamination can reduce traction. The insert supports safer footing but does not remove the need for correct fitting, suitable lighting and routine staircase maintenance.

Concealed Fixings for a Cleaner Appearance

Fixing screws are supplied with the stair nosing, and the profile is designed to conceal the fixing points once installed. This creates a cleaner appearance than exposed screw heads while still allowing the profile to be mechanically secured to the step.

The exact installation process will depend on the material beneath the floor covering. Timber stairs may require a different preparation method from concrete or composite stair structures, so the correct drill bits, plugs and fixings should be selected for the underlying surface.

Before drilling, the profile should be positioned and checked along the full width of the step. Concealed pipes, electrical cables and unsuitable structural areas should be identified before any holes are made.

Measuring and Preparing the 900mm Profile

Each stair nosing is supplied in a 900mm length. Although this measurement suits many domestic stairs, individual step widths can vary, even across the same staircase. Every step should therefore be measured before cutting or installation.

Where trimming is required, the aluminium and rubber insert should be cut neatly using tools appropriate for the materials. Rough or uneven cuts may leave sharp edges or prevent the end of the profile from sitting flush against the side of the staircase.

The profile dimensions should also be compared with the thickness and position of the existing floor covering. Carpet should be firmly fitted, and wooden flooring should not be loose, damaged or uneven beneath the nosing.

Cleaning and Checking the Installed Nosing

Routine cleaning helps maintain both the appearance of the matt aluminium and the texture of the black rubber insert. Loose debris can be removed using a soft brush or vacuum, while ordinary marks may be wiped with a lightly damp cloth and a compatible mild cleaner.

Abrasive pads and aggressive chemicals should be avoided because they may scratch the aluminium finish or damage the rubber insert. Excessive water should not be allowed to collect around the profile or beneath the flooring edge.

The nosing should be inspected periodically to confirm that it remains firmly secured. Loose fixings, movement in the floor covering or damage to the rubber insert should be addressed promptly to prevent an uneven stair edge from developing.

Frequently Asked Questions

Is this stair nosing suitable for carpeted stairs?

Yes, the supplied product information lists carpet among the suitable flooring types. The carpet must be firmly secured and should not bunch, move or create an uneven surface beneath the profile. The fixing screws also need to reach a stable part of the stair structure rather than relying on the carpet alone for support.

Can the profile be fitted to wooden steps?

The aluminium profile is suitable for use with wooden flooring and timber stairs when the underlying material is stable and appropriate for screw fixing. The position of each fixing point should be checked carefully, and pilot holes may be required to reduce the risk of splitting or damaging the wood during installation.

Are the fixing screws included with the stair nosing?

Yes, fixing screws are supplied. However, the suitability of the supplied screws will depend on the material and construction of the staircase. Additional plugs or alternative fixings may be necessary for concrete, masonry or other surfaces, so the installation requirements should be assessed before fitting.

What are concealed fixings?

Concealed fixings are positioned beneath or within the finished profile so that the screw heads are not prominently visible after installation. This creates a cleaner appearance across the stair edge while still providing mechanical attachment. The profile must be installed in the correct sequence for the fixing points to remain covered.

Can the 900mm length be cut to fit a narrower stair?

Yes, the profile can be shortened when required, but it should be cut using tools suitable for aluminium and rubber. Measure the step carefully before cutting and allow for any side walls, skirting or irregular edges. The cut ends should be smooth and free from sharp sections before the nosing is installed.

Does the black rubber insert prevent slipping?

The textured rubber insert is designed to add grip around the front contact area of the step. It should not be considered a guarantee against slipping, particularly if the surface becomes wet, greasy or covered with dust. Regular cleaning, secure installation and appropriate stair lighting remain important.

Is this nosing suitable for every flooring type?

The product is described as suitable for all flooring types, including wood and carpet, but practical compatibility depends on the floor thickness, stability and stair construction. The profile should sit evenly without compressing, lifting or damaging the flooring. Suitability should be checked before drilling or cutting.

At Rubber Fit Floors, we are committed to delivering your orders efficiently and securely to your doorstep. Here’s everything you need to know about our shipping process:

1. Shipping Destinations
We currently ship to the United Kingdom, covering all regions including mainland UK, Northern Ireland, and the Scottish Highlands. If you’re located outside the UK, please get in touch with us to discuss custom shipping options.

2. Processing Time

An order confirmation email does not constitute acceptance of your order. Acceptance occurs only when the order has been dispatched. All orders are processed within 1–2 business days.
Orders placed on weekends or holidays will be processed on the next working day.

3. Delivery Time
Standard Delivery: 3–5 business days.
Express Delivery: 1–2 business days (available at an additional charge).
Delivery times are estimates only and not guaranteed. We are not liable for delays caused by couriers or external factors.

4. Shipping Charges
Standard Delivery: £7.99 (Free for orders over £100).
Express Delivery: £24.95.
For bulky or custom orders, shipping charges will be calculated based on the weight and dimensions of your package.

5. Tracking Your Order
Once your order is dispatched, you will receive an email with a tracking link to monitor your shipment. If you do not receive this information, please contact our support team.

6. Damaged or Lost Shipments
If your order arrives damaged or is delayed beyond the expected delivery time, kindly reach out to us immediately. We will assist you with replacements, refunds, or further inquiries.

7. Contact Us
For any shipping-related questions, feel free to contact our customer support:
📧 Email: procurement@rubberfitfloors.co.uk
📞 Phone: 07404270642
Address: 9 Fiveacre Close, Thornton Heath, CR7 6AS