A Neat Finish for LVT Stair Edges

This 90cm aluminium stair nosing is intended for staircases finished with 5mm LVT or compatible vinyl flooring. It provides a dedicated profile around the front of the step, helping the flooring transition more neatly across the stair edge rather than leaving the cut flooring edge exposed.

LVT stair installations require careful finishing because the flooring must correspond with the shape and dimensions of the step. A purpose-made stair profile can help create a more consistent appearance where the tread meets the front section of the stair.

The supplied title identifies this profile specifically for 5mm LVT flooring. Flooring thickness should therefore be checked carefully before ordering, particularly where an existing installation includes underlay, additional layers, or previously fitted materials that could affect the finished height.

Why the 5mm Flooring Thickness Matters

The 5mm reference relates to the LVT flooring thickness that the stair nosing is intended to accommodate. This is an important measurement because stair profiles are generally selected according to the flooring they need to work with rather than overall staircase dimensions alone.

Using flooring that is significantly thicker or thinner than the intended profile may affect how neatly the materials meet around the stair edge. For this reason, the finished flooring thickness should be confirmed before the profile is selected.

It is also worth checking whether the stated 5mm measurement represents the complete installed flooring thickness in your project. Any additional layer beneath the LVT could change how the flooring sits in relation to the aluminium edging.

Accurate checking at this stage can make the final stair finish more consistent and reduce the need for unnecessary adjustments during installation.

Measuring the 90cm Profile Against Your Stairs

The stair nosing measures 90cm in overall length, equivalent to approximately 35.49 inches. Before ordering, measure the full width of each stair where the profile will be installed.

Do not assume every step has exactly the same width. Small variations are common, particularly on older staircases or where previous flooring work has changed the edges. Measuring several steps can help identify these differences before the aluminium profiles are prepared.

Where the stair is narrower than 90cm, the profile may need to be shortened. The supplied information does not include cutting instructions, so any trimming should be carried out using suitable guidance and tools intended for aluminium profiles.

The remaining dimensions of the profile are not included in the supplied information. If those measurements are important for your installation, they should be confirmed before fitting.

Aluminium Construction for Vinyl Flooring Installations

The supplied specifications list aluminium as the construction material. Aluminium profiles are commonly chosen where a structured edge finish is required around flooring transitions, and this particular product is presented specifically for LVT and vinyl stair applications.

The aluminium creates a separate finishing section between the flooring and the exposed stair edge. This can help produce a more consistent appearance across multiple steps where the same flooring material is being installed throughout the staircase.

The supplied information does not confirm additional properties such as an anti-slip insert, self-adhesive backing, or a particular fixing system. These features should therefore not be assumed when planning the installation.

The profile is listed as suitable for any room, although the staircase dimensions, flooring thickness, and installation conditions should remain the main factors when deciding whether it is appropriate for a particular project.

Preparing the Flooring and Stair Before Fitting

Before installation, make sure the stair edge and surrounding flooring area are properly prepared. Loose material, uneven edges, or incorrect flooring alignment can affect how consistently the profile sits along the step.

The 5mm LVT should be checked against the profile before permanent fitting begins. A trial placement can help confirm the relationship between the flooring surface, stair edge, and aluminium trim before the installation is completed.

The supplied product information does not state whether adhesive, screws, or another fixing system is required. The fitting method should therefore be confirmed from the actual profile design rather than copied from another type of stair nosing.

Once installed, routine cleaning will help keep the aluminium edge free from dust and grit. Periodic inspection is also useful, particularly on frequently used stairs, to ensure the profile remains properly positioned and the surrounding LVT continues to sit neatly against the edging.

Frequently Asked Questions

Is this stair nosing suitable for 5mm LVT flooring?

The title identifies this profile for 5mm LVT flooring. Check the flooring thickness and stair edge dimensions so the profile can sit correctly around the finished step.

What is the overall length of this stair nosing?

The profile measures 90cm, approximately 35.49 inches. Measure the stair width before ordering to confirm whether the supplied length is suitable for the intended installation.

What material is this stair profile made from?

The supplied specifications list aluminium as the material. No alternative construction material is confirmed, so aluminium should be treated as the listed material for this profile.

What does the 5mm size refer to?

The 5mm reference in the title relates to the LVT flooring thickness this profile is intended to accommodate. It does not describe the overall dimensions of the nosing.

Can this profile be used with vinyl flooring?

Yes. The title describes it as a vinyl flooring stair edge profile and specifically references LVT. Check that the flooring thickness corresponds with the profile before fitting.

Should every stair be measured before ordering?

Yes. Measure several steps because widths and edge conditions can vary, especially on older or renovated staircases. This also helps confirm whether the 90cm length is appropriate.

Does the product information specify a fixing method?

No. The supplied details do not confirm whether the profile uses adhesive, screws, or another system. Check the profile design and installation requirements before choosing a fixing method.

Can the 90cm aluminium profile be shortened?

The supplied information confirms the 90cm length but gives no cutting instructions. If trimming is required, use suitable guidance and tools intended for aluminium profiles.

Is this stair nosing suitable for any room?

The supplied specifications state that it is suitable for any room. Final suitability depends on the staircase dimensions, flooring thickness, and condition of the existing step edge.

How should this aluminium stair profile be maintained?

Keep the profile free from dust, grit, and debris through routine cleaning. Periodically inspect the fitted edge to make sure it remains properly positioned during everyday use.

Natural Oak Finishing for Exposed Corners

This solid oak cushion corner L bead provides a natural timber finish where two surfaces meet at an exposed right angle. Its L-shaped construction covers both sides of the corner, helping create a cleaner transition while protecting the underlying edge from everyday knocks, scuffs and contact.

The oak construction makes the profile particularly suitable for interiors where plastic or metal edging would not complement the surrounding timber. Natural grain, colour and markings will vary between pieces because solid wood does not have the completely uniform appearance of a printed or manufactured finish.

Choosing the Correct Profile Size

The profile is available in 20mm, 25mm, 30mm, 40mm and 45mm size options. A smaller option may suit compact corners and narrow trim work, while a wider profile provides more coverage across each side of the underlying edge.

The supplied information does not include a technical drawing showing whether the selected measurement applies equally to both sides of the L-shaped profile. Measure the top and front surfaces carefully and compare them with the selected option before ordering, especially where the bead must fit around a stair tread or existing timber feature.

Suitable Uses Around Stairs and Interior Woodwork

The cushion corner profile can be used as stair edge nosing, a corner angle bead or a finishing trim for selected joinery projects. It may be suitable for covering exposed timber edges, defining the front of a tread or creating a more complete appearance where two wooden surfaces meet.

The term “cushion corner” describes the profile style, but the exact radius and curvature of the outer edge are not stated in the available specifications. Where a precise rounded shape is required, the profile should be checked against the intended project before cutting or permanently fixing it.

Measuring and Cutting the 900mm Length

The 900mm length is suitable for many domestic stair widths and smaller interior finishing projects. It can be shortened where the installation requires a narrower piece, although each stair or corner should be measured separately because dimensions can vary across the same property.

A fine-tooth saw intended for hardwood will generally produce a cleaner result with less risk of tearing the oak fibres. The profile should be supported securely while cutting, and any roughness or sharp fibres at the cut end can be removed carefully with fine abrasive paper.

Fixing, Finishing and Maintaining the Oak

The supplied details do not confirm that adhesive, screws, pins or other installation materials are included. The fixing method should therefore be selected according to the underlying surface, the intended use and whether visible fixings are acceptable. Both sides of the corner must be clean, dry, stable and level before fitting.

No oil, stain, lacquer or varnish is specified. Any decorative or protective treatment should be tested on a concealed section or offcut first because oak can darken or change tone after finishing. Routine care should avoid excessive moisture and harsh abrasives that could affect the timber surface.

Frequently Asked Questions

Is this corner bead made from solid oak?

The product title and supplied specifications identify the profile as solid oak, with oak also stated as the wood species and timber type. As a natural hardwood product, each length may display slightly different grain patterns, markings and colour tones. These natural variations should be expected and can help the trim blend with other genuine timber features.

Which size should I choose for my project?

Choose a size that provides enough coverage across both sides of the corner without extending too far onto the surrounding surfaces. Measure the upper and front faces of the edge before ordering. Because the supplied information does not include a detailed cross-section drawing, avoid assuming that every listed measurement refers to a specific internal or external dimension.

Can this profile be used as stair nosing?

It is described as an edge nosing and may be used to finish selected stair tread corners where its dimensions and shape match the staircase. The underlying tread must be stable and level, and the profile should not reduce usable tread space or create an awkward raised edge. Confirm the selected size and fixing method before installation.

What does cushion corner mean?

Cushion corner generally refers to the outer shape or softened appearance of the edge rather than a completely sharp square corner. However, the exact radius and degree of rounding are not supplied in the product information. Where the precise shape is important, particularly for matching existing joinery, it should be checked before the material is cut.

Can the 0.9m oak bead be cut shorter?

Yes, solid oak profiles can generally be shortened using a fine-tooth saw suitable for hardwood. Measure and mark the required length carefully, then support the bead securely during cutting to reduce movement and splintering. The cut end can be sanded lightly to remove rough fibres and create a cleaner finish against the side of the installation.

Are screws or adhesive included?

The available product details do not state that screws, pins, adhesive or other installation materials are supplied. A suitable fixing method will need to be selected according to the substrate and application. The chosen fixing should secure both sides of the L profile without splitting the oak or leaving unsupported gaps underneath it.

Can the solid oak be stained or varnished?

The supplied information does not confirm whether the timber has already received a surface treatment. Inspect the profile before applying stain, oil, wax, lacquer or varnish, and test the chosen finish on a concealed area first. Oak can become noticeably darker or warmer after treatment, so testing helps confirm the final appearance.

A Practical Finish for Stair Edges

This 10FT vinyl rubber stair edge trim is designed to provide a neat and practical finish along the front edges of stairs. Its flexible vinyl rubber construction allows it to follow the shape of the stair edge while providing a consistent profile across the installation area.

The trim is suitable for stairs and can be used where a waterproof and non-slip edge finish is required. Its simple design makes it a practical choice for updating existing stair edges or completing a new stair installation.

Flexible Vinyl Rubber Construction

Made from vinyl rubber, this stair edge protector offers a flexible alternative to rigid metal stair nosing. The material can provide coverage around the leading edge of the step while maintaining a clean appearance.

The listed width is 1.97 inches, while the item height is 1.89 inches. These dimensions should be checked against your existing stair edge before installation to ensure the trim provides suitable coverage.

The waterproof material is also useful in areas where the stair edge may be exposed to occasional moisture. However, the suitability of the complete installation will depend on the surface and surrounding materials.

Non-Slip Finish for Everyday Stair Use

The trim features a non-slip finish designed to provide additional grip along the stair edge. This can be particularly useful on steps where maintaining a practical and clearly finished leading edge is important.

Before fitting, check that the stair surface is clean, dry, stable and free from loose material. Accurate measurement is also important so the trim sits evenly across the complete step edge.

10FT Length for Flexible Installation

With a 10FT length, this stair edge trim can be measured and cut according to the requirements of individual steps. This makes it suitable for projects involving multiple stairs where a continuous length can be divided into suitable sections.

Measure each step carefully before cutting, especially if the staircase contains different widths or unusual shapes. Planning the cuts beforehand can help minimise waste and produce cleaner joins between sections.

Suitable for Stair Edge Protection

This vinyl rubber stair edge trim is designed specifically for stair applications and provides a straightforward way to finish exposed step edges. Its waterproof construction, non-slip finish and flexible material make it a practical option for a variety of stair projects.

For the best result, ensure the installation surface is properly prepared and the profile is positioned accurately before fixing. Check the 10FT length and 1.97 x 1.89 inch profile dimensions before ordering to confirm compatibility with your stairs.

Frequently Asked Questions

What is this stair edge trim used for?

This trim is designed to finish and cover exposed stair edges while providing a practical non-slip surface. It can be used on stairs where a flexible vinyl rubber profile is preferred.

What material is the stair trim made from?

The trim is made from vinyl rubber. This provides a flexible alternative to rigid aluminium or other metal stair-edge profiles.

How long is the stair edge trim?

The listed length is 10FT. It can be measured and cut into suitable sections depending on the width and number of steps in your project.

What are the profile dimensions?

The listed width is 1.97 inches and the height is 1.89 inches. Check these measurements against your stair edge before purchasing.

Does the trim have a non-slip finish?

Yes. The product is listed with a non-slip finish, making it suitable for stair areas where additional grip at the step edge is required.

Is this stair trim waterproof?

Yes. The product is described as waterproof and is made from vinyl rubber. The surrounding installation area should still be assessed for suitability where moisture is present.

Can the 10FT trim be cut?

Yes. The length can be measured and cut to suit individual stairs. Accurate measurements before cutting can help reduce waste and create cleaner joins.

Is it suitable for all types of stairs?

It is specifically listed as suitable for stairs, but compatibility depends on the dimensions and condition of your particular stair edges. Check the profile size before installation.

How should the stairs be prepared?

The surface should be clean, dry and stable before fitting. Remove dust, grease and loose material so the trim can sit correctly against the stair edge.

What should I check before ordering?

Check the 10FT length, 1.97 inch width, 1.89 inch height and non-slip finish. Also confirm that the profile shape and material are suitable for your intended stair installation.

A Versatile Edge Profile for Stair Projects

This 10FT stair edge protector provides a practical way to finish exposed stair edges while creating a more structured and consistent appearance. Made from vinyl rubber and supplied with a non-slip finish, the trim is designed for stair applications where a functional edge profile is needed.

The 10FT continuous length provides useful material for projects involving multiple stair sections. Rather than working with several short pieces, the trim can be measured and cut according to the requirements of individual steps. This makes it useful for both new installations and suitable renovation projects.

The product is listed for indoor and outdoor use, giving it flexibility across different stair environments. Before installation, always compare the profile dimensions with the available stair edge and consider the surface conditions of the intended application.

Vinyl Rubber Construction for Practical Stair Finishing

The stair edge protector is manufactured from vinyl rubber, offering a practical combination of flexibility and everyday usability. This material is suitable for a profile that needs to follow the front edge of a stair while providing a clean finished appearance.

The non-slip finish gives the surface an additional functional characteristic for stair applications. It is particularly relevant where a clearly finished stair nose is preferred as part of the overall step design.

With an item width of 1.97 inches and height of 1.89 inches, the profile has a substantial visible presence. These measurements should be checked carefully against the dimensions of your existing stair edge before ordering to ensure the trim is appropriate for the project.

Suitable for Indoor and Outdoor Stair Applications

This stair edge protector is listed as suitable for both indoor and outdoor use, making it a flexible option for different stair projects. It can be considered for suitable residential, commercial or general access areas where the profile dimensions and installation conditions are compatible.

For indoor applications, it can provide a neat finishing detail on frequently used stairways. For outdoor projects, assess the condition of the installation surface and surrounding environment before fitting to ensure the product is appropriate for the intended location.

Regardless of where it is used, accurate measurements and proper surface preparation are important. The stair edge should be clean, stable and suitable for the chosen installation method before the trim is fitted.

10FT Continuous Length for Flexible Coverage

The 10FT length gives you flexibility when planning a project across several steps. Each stair can be measured individually, allowing the material to be cut into sections that correspond with the actual dimensions of the staircase.

Measuring every step is recommended because stair dimensions can vary, particularly on older properties, renovated staircases or individually constructed steps. Marking each required section before cutting can help maintain consistent coverage and reduce avoidable offcuts.

For larger projects, calculate the total required coverage before installation. This allows the 10FT length to be planned more efficiently and helps determine whether additional material may be required.

Practical Installation and Finished Stair Appearance

The stair edge trim is designed as a practical option for installation on suitable stairs. Preparing the surface properly before fitting can make the installation process more straightforward and help achieve a cleaner final appearance.

Start by checking the stair edge and removing loose dirt, dust or unsuitable material from the fitting area. Measure the required section carefully before cutting, then position the trim accurately along the front edge of the step.

It is important to use an installation method appropriate for the particular stair surface and project requirements. Once correctly fitted, the vinyl rubber profile provides a clearly finished stair edge that can complement both indoor and outdoor applications.

Frequently Asked Questions

What material is this stair edge protector made from?

This stair edge protector is made from vinyl rubber. The material provides a practical and flexible profile for finishing stair edges, while the non-slip finish adds a functional surface characteristic for stair applications.

How long is the stair edge trim?

The product has a listed item length of 10FT. This continuous length can provide useful coverage across several stair sections, depending on the dimensions of the individual steps and the amount required for each section.

Is this stair edge protector suitable for indoor use?

Yes. The product is listed as suitable for indoor and outdoor use. For indoor projects, check the stair dimensions and surface condition before installation to make sure the profile is appropriate for the intended application.

Can it be used on outdoor stairs?

Yes, it is listed for indoor and outdoor applications. However, the suitability of any installation depends on the stair surface, environmental conditions and dimensions. Check these factors carefully before fitting the trim.

What is the width of the stair edge profile?

The listed item width is 1.97 inches. Measure your existing stair edge before ordering so you can compare the available space with the dimensions of the trim.

What is the height of this stair nose trim?

The listed item height is 1.89 inches. This measurement should be considered alongside the width when checking whether the profile will work with your particular stair edge.

Does the trim have a non-slip finish?

Yes. The listed finish is Non-Slip. This provides an additional functional characteristic to the stair edge profile while contributing to its practical use on stairs.

Can the 10FT length be cut for individual steps?

The continuous 10FT length can be measured and prepared for individual stair sections. Measure each step carefully before cutting, particularly where stair dimensions differ, to help achieve accurate coverage.

How should the stair surface be prepared?

The installation area should be clean, dry and stable before fitting. Remove loose dirt, dust and unsuitable surface material where necessary, then measure and position the trim carefully for a neat result.

What should I check before purchasing this stair edge protector?

Check the available stair edge dimensions, required total length, installation surface and intended indoor or outdoor application. Compare these details with the 10FT length, 1.97-inch width and 1.89-inch height of the product.

A Practical Finish for Stair Edges

This 3.3FT stair edge protector is designed to provide a practical and neat finish along the front edge of stairs and steps. Made from vinyl rubber, the trim offers a flexible alternative to rigid metal stair-edge profiles while providing useful coverage around the leading edge.

The non-slip finish adds a functional surface to the profile, making it suitable for stair areas where additional grip and a clearly finished step edge are required. Its compact 3.3FT length makes it particularly useful for individual steps, repairs and smaller stair projects.

Flexible Vinyl Rubber Construction

The vinyl rubber construction provides a flexible edge profile that can adapt to suitable stair surfaces. The listed width is 1.97 inches and the height is 1.89 inches, so these dimensions should be checked against the existing stair edge before installation.

This profile can be considered where a softer and more adaptable stair-edge trim is preferred over aluminium or other rigid materials. Its simple design provides a practical way to cover and finish the exposed front portion of a step.

Non-Slip Trim for Everyday Stair Use

The non-slip finish is designed to provide additional grip along the stair edge. This can be useful in areas where stairs receive regular foot traffic and a practical step-edge surface is required.

Before fitting, the stair surface should be clean, dry, stable and free from dust, grease and loose material. Proper preparation helps the trim sit correctly and supports a cleaner finished installation.

Suitable for Indoor and Outdoor Applications

This stair edge protector is listed as suitable for both indoor and outdoor use. It can therefore be considered for different stair environments, provided the profile dimensions and installation requirements are suitable for the particular application.

For outdoor use, check the condition of the substrate and surrounding surface before installation. For indoor projects, it can be considered for stair refurbishment, replacement work and general step-edge finishing.

3.3FT Length for Individual Step Projects

The 3.3FT length provides a convenient section for individual stairs or smaller areas. The trim can be measured and cut where necessary to match the required step width.

Before cutting, measure the stair carefully and plan the installation to minimise unnecessary waste. Also check the 1.97 x 1.89 inch profile dimensions to ensure the trim provides suitable coverage around the step edge.

With its vinyl rubber construction, non-slip finish and indoor/outdoor suitability, this stair edge protector offers a practical option for improving the appearance and functionality of exposed stair edges.

Frequently Asked Questions

What is this stair edge protector used for?

This trim is designed to cover and finish exposed stair edges while providing a non-slip surface. It can be used for stair repairs, refurbishment and new installations where the profile dimensions are suitable.

What material is the stair trim made from?

The stair edge protector is made from vinyl rubber. This provides a flexible alternative to rigid aluminium or metal stair nosing and allows it to suit various stair-edge applications.

How long is the stair edge trim?

The listed length is 3.3FT. This makes it suitable for individual steps, short stair sections and smaller repair or replacement projects.

What are the dimensions of the profile?

The listed profile is 1.97 inches wide and 1.89 inches high. Compare these dimensions with your existing stair edge before purchasing.

Does it have a non-slip finish?

Yes. The product is listed with a non-slip finish, providing an additional grip-focused surface along the front edge of the stair during everyday use.

Can it be used outdoors?

Yes. The product is listed as suitable for both indoor and outdoor use. For outdoor installation, check the substrate and surrounding conditions before fitting.

Can the 3.3FT trim be cut?

Yes. The trim can be measured and cut to suit individual stair widths. Planning measurements before cutting can help reduce waste and create cleaner finished edges.

Is it suitable for every staircase?

It is listed for stair use, but suitability depends on the shape, dimensions and condition of the existing stair edge. Check the profile size before installation.

How should the surface be prepared?

The stair surface should be clean, dry, stable and free from dust, grease and loose material. Proper preparation provides a better base for fitting the trim.

What should I check before buying?

Check the 3.3FT length, 1.97 inch width, 1.89 inch height and non-slip finish. Also confirm that the vinyl rubber profile is suitable for your intended indoor or outdoor stair application.

A Practical Stair Nose for Everyday Use

This 10FT vinyl rubber stair nose molding is designed to provide a practical finish along the front edges of stairs. Its vinyl rubber construction creates a flexible alternative to rigid metal stair-edge profiles, while the non-slip finish adds a functional surface for everyday stair use.

The 10FT length is useful for projects involving multiple steps or longer stair runs. The material can be measured and cut into suitable sections according to individual step widths, making it suitable for refurbishment, replacement and new stair-edge projects.

The product is listed specifically as a stair edge protector and is designed to cover the leading edge of the step while giving the staircase a more consistent finished appearance.

Vinyl Rubber Construction with Non-Slip Finish

Made from vinyl rubber, this stair nose provides a flexible profile that can be considered where a softer edge treatment is preferred. The material is suitable for stair applications and can provide practical coverage around the front of the step.

The non-slip finish is designed to provide additional grip at the stair edge. This can be useful in areas where stairs receive regular daily use and maintaining a practical step surface is important.

The listed profile dimensions are 1.97 inches wide and 1.89 inches high. These measurements should be compared with the existing stair edge before purchasing to ensure the profile provides suitable coverage.

Designed for High Traffic Stair Areas

The 10FT format makes this stair nose suitable for areas where several steps need a consistent edge treatment. A continuous length can be measured and divided into sections, helping maintain the same profile across multiple stairs.

For high traffic areas, correct installation and surface preparation are particularly important. The stair edge should be clean, dry, stable and free from dust, grease and loose material before fitting.

The condition of the existing step should also be checked before installation. Any loose or damaged surface material should be addressed so the stair nose has a suitable base.

10FT Length for Flexible Cutting

The long 10FT length provides flexibility when planning a stair installation. Measure each step carefully before cutting, especially where individual stairs have different widths.

Planning the cuts in advance can help reduce unnecessary waste and produce cleaner joins between sections. The 1.97 x 1.89 inch profile should also be considered when checking how the trim will sit over the front edge.

For a single step, only the required length needs to be cut. For multiple stairs, calculate the combined requirement before installation to ensure sufficient material is available for the complete project.

Simple Protection for Stair Edges

This vinyl rubber stair nose combines a non-slip finish with a flexible construction and 10FT length. It offers a straightforward option for finishing stair edges in areas where steps receive frequent everyday use.

Accurate measuring, suitable surface preparation and careful positioning can help achieve a neat finished installation. Regular cleaning can also help maintain the appearance of the non-slip surface.

Before ordering, check the 10FT length, 1.97 inch width and 1.89 inch height against your existing staircase. This will help confirm that the profile is appropriate for the intended stair-edge application.

Frequently Asked Questions

What is this stair nose molding used for?

This stair nose molding is designed to cover and finish the front edge of stairs while providing a non-slip surface. It can be used for replacement, refurbishment and new stair-edge projects.

How long is the stair nose?

The listed length is 10FT. This provides enough material for longer stair runs or multiple individual steps, depending on the width of each staircase.

What material is it made from?

The product is made from vinyl rubber. This offers a flexible alternative to rigid metal stair nosing and provides practical coverage around the leading edge.

What are the profile dimensions?

The listed width is 1.97 inches and the height is 1.89 inches. Compare these measurements with your existing stair edge before purchasing.

Does it have a non-slip surface?

Yes. The product has a non-slip finish designed to provide additional grip at the stair edge during everyday use, particularly where regular foot traffic is expected.

Can the 10FT length be cut?

Yes. The material can be measured and cut into individual sections for different steps. Accurate measurements before cutting can help minimise waste and create cleaner joins.

Is it suitable for high traffic areas?

The product title specifies high traffic areas, making it intended for stair applications that receive frequent everyday use. Correct installation and surface preparation remain important.

How should the stair surface be prepared?

The surface should be clean, dry, stable and free from dust, grease and loose material. Proper preparation provides a suitable base for fitting the stair-edge trim.

Can it be used on any staircase?

It is listed as suitable for stairs, but compatibility depends on the size and shape of your stair edge. Check the 1.97 x 1.89 inch profile before installation.

What should I check before ordering?

Check the 10FT length, profile dimensions, stair width and existing surface condition. Confirm that the vinyl rubber construction and non-slip finish suit your intended application.

A Practical Trim for Stair Edges

This heavy duty stair edge trim is designed to provide a practical finish around exposed stair and step edges. Made from vinyl rubber, it offers a flexible alternative to rigid metal profiles while providing a substantial edge covering for everyday stair applications.

The trim has a 1.97 inch width and 1.89 inch height, creating a noticeable profile around the front edge of the step. Its non-slip finish makes it suitable for areas where additional grip along the stair edge is an important consideration.

With a 3.3FT length, the trim can be measured and cut according to the requirements of individual steps. This makes it useful for smaller repair, refurbishment and stair-edge finishing projects.

Vinyl Rubber Construction and Non-Slip Surface

The vinyl rubber construction provides flexibility while maintaining a practical profile for stair-edge applications. It can be considered where a softer and more adaptable material is preferred over aluminium or other rigid stair nosing options.

The non-slip finish adds a functional surface to the trim and can provide additional grip at the leading edge of the step. The profile dimensions should be checked against your existing stairs before ordering to ensure the trim provides suitable coverage.

The product is listed as a stair edge protector, making it particularly suitable for finishing exposed step edges and creating a more consistent appearance across the staircase.

Suitable for Indoor and Outdoor Use

This stair edge trim is listed as suitable for both indoor and outdoor use, giving it flexibility across different installation environments. It can be considered for residential, utility, commercial and other stair applications where the profile dimensions are suitable.

Before installation, check the condition and shape of the stair edge. The surface should be clean, dry and stable, with dust, grease and loose material removed before fitting.

For outdoor applications, consider the condition of the underlying surface and the exposure of the installation area before choosing the appropriate fixing method.

3.3FT Length for Flexible Cutting

The 3.3FT length allows the trim to be cut into a section suitable for an individual stair or step. Measure the required length carefully before cutting to minimise material waste and achieve a clean finished edge.

The 1.97 inch width and 1.89 inch height should also be considered when planning the installation. Comparing these dimensions with the existing stair construction helps ensure the profile can sit correctly without interfering with surrounding surfaces.

For multiple steps, calculate the total length required before purchasing, as one 3.3FT section may not cover a complete staircase.

Simple Stair Edge Protection and Finishing

This vinyl rubber stair edge trim combines a heavy duty profile with a non-slip finish and flexible material. Its compact 3.3FT length makes it practical for individual stair repairs, replacements and smaller installation areas.

For a neat result, accurate measuring and proper surface preparation are important. Position the trim carefully and ensure the selected fixing method is appropriate for the stair surface.

Overall, this profile provides a straightforward option for finishing stair edges where a vinyl rubber construction, non-slip surface and indoor or outdoor suitability are required.

Frequently Asked Questions

What is this stair edge trim used for?

This trim is designed to cover and finish exposed stair edges while providing a non-slip surface. It can be used for stair repairs, refurbishment projects and new installations where the profile dimensions are suitable.

What material is the trim made from?

It is made from vinyl rubber. This provides a flexible alternative to rigid aluminium or metal stair-edge profiles and allows the trim to suit various stair-edge applications.

How long is the trim?

The listed length is 3.3FT. This makes it particularly suitable for individual steps, smaller repairs or short sections requiring stair-edge protection.

What are the profile dimensions?

The listed width is 1.97 inches and the height is 1.89 inches. These dimensions should be compared with your existing stair edge before ordering.

Does it have a non-slip finish?

Yes. The product is listed with a non-slip finish. This provides additional grip at the stair edge and adds a practical feature to the profile.

Can it be used outdoors?

Yes. The product is listed as suitable for both indoor and outdoor use. For outdoor fitting, consider the condition of the substrate and the installation environment.

Can the trim be cut?

Yes. The 3.3FT length can be measured and cut to suit individual stair sections. Careful measuring before cutting can help reduce waste and create cleaner edges.

Is it suitable for different stair types?

It may suit various stair applications, but compatibility depends on the dimensions, shape and condition of the existing stair edge. Check the profile measurements before installation.

How should the surface be prepared?

The stair surface should be clean, dry and stable before installation. Remove dust, grease and loose material so the trim can sit correctly against the edge.

What should I check before buying?

Check the 3.3FT length, 1.97 inch width, 1.89 inch height, non-slip finish and intended indoor or outdoor application. Confirm the profile suits your stair dimensions.

A Clean Finish for LVT and Vinyl Stair Edges

This aluminium stair nosing profile is designed to provide a neat and practical finish along the front edge of stairs finished with LVT or vinyl materials. The profile helps create a consistent transition at the leading edge while giving the staircase a more complete and professionally finished appearance.

With a 900mm length and 44mm width, the profile provides useful coverage for individual stair sections. Its aluminium construction makes it suitable for projects where a rigid and durable edge profile is preferred. The C25 design provides a defined shape around the stair edge without creating an unnecessarily bulky appearance.

Aluminium Profile with a Matt Finish

The profile is manufactured from aluminium and features a matt finish. This gives the stair edge a clean, understated appearance that can work with a range of interior styles.

The 17.5mm profile dimension should be considered alongside the 44mm width when checking compatibility with your existing stair construction. Measuring the tread and front edge before installation helps ensure the profile sits correctly and provides the required coverage.

The aluminium construction is particularly useful where a rigid stair-edge profile is required. It provides a firm edge treatment for LVT and vinyl stair installations while maintaining a simple, modern appearance.

Screw-Mounted Installation for a Secure Fit

This stair nosing is designed for screw-mounted installation. Unlike adhesive-only profiles, mechanical fixing allows the trim to be secured directly to the appropriate stair surface using suitable screws and installation methods.

Before fitting, measure the stair edge carefully and position the profile so it aligns evenly across the front of the step. The fixing points should be planned according to the stair construction and the installation requirements of the project.

The stair surface should be clean, stable and properly prepared before installation. Taking time to align the profile correctly will help achieve a straight and consistent finish across the full 900mm length.

Designed for Individual Stair Sections

The 900mm length makes this profile suitable for individual stair edges and smaller installation sections. If your steps are wider or require additional coverage, measure the complete area before purchasing to determine how many profiles are needed.

The 44mm width and 17.5mm profile dimension should also be compared with the existing stair edge. This is especially important when replacing an old nosing profile or installing a new LVT or vinyl finish.

Because the profile is screw mounted, installation can be planned around the structure of the existing step. Accurate measuring and careful positioning are important for achieving a neat finished edge.

Suitable for a Range of Interior Rooms

This aluminium stair nosing can be considered for stairs located in a variety of interior environments, including bedrooms, kitchens, living rooms, bathrooms, basements and other rooms.

Its matt aluminium appearance provides a neutral finish that can complement different LVT and vinyl surfaces. The profile is supplied new and includes one item, making it suitable for individual stair-edge installation projects.

For the best result, always check the dimensions, stair construction and fixing requirements before installation. With its 900mm length, 44mm width, 17.5mm profile and screw-mounted design, this C25 stair nosing provides a practical solution for finishing LVT and vinyl stair edges.

Frequently Asked Questions

What is this stair nosing designed for?

This aluminium stair nosing is designed to finish the front edge of stairs covered with LVT or vinyl. It provides a clean, rigid profile around the leading edge and helps create a consistent finished appearance.

What are the dimensions of the profile?

The profile measures 900mm long and 44mm wide, with a listed profile dimension of 17.5mm. These measurements should be compared with your stair edge before installation.

What material is the stair nosing made from?

It is made from aluminium. This provides a rigid profile suitable for projects where a firm stair-edge trim is preferred over flexible vinyl or PVC alternatives.

What type of finish does it have?

The profile has a matt finish, giving it a subtle and understated appearance that can complement different LVT and vinyl stair surfaces.

How is this stair nosing installed?

It is designed for screw-mounted installation. The profile should be positioned accurately and fixed using suitable screws appropriate for the existing stair construction and substrate.

Can it be used with LVT?

Yes. The product is intended for stair edges where LVT or vinyl finishes are being used. Always check the profile measurements against the completed stair construction before fitting.

Is the profile suitable for bathrooms?

The listed room suitability includes bathrooms, along with bedrooms, kitchens, living rooms, basements and other interior areas. The suitability of the complete installation also depends on the substrate and surrounding materials.

Can one profile cover one complete stair?

The profile is 900mm long, so coverage depends on the width of the individual stair. Measure each step before installation to determine whether one length provides sufficient coverage.

What should I check before installation?

Check the stair width, 44mm profile width, 17.5mm profile dimension and fixing surface. Accurate measurements help ensure the profile sits correctly and remains aligned across the stair edge.

Is this product supplied new?

Yes. The supplied item is listed as new and the specification states that the number of items is one. The profile is suitable for individual stair-edge installation or replacement projects.

A Longer Profile for Consistent Stair Edge Finishing

This 2.7m aluminium stair nosing is designed for stair projects where a practical edge trim is required across carpet or wood finished steps. The longer profile provides useful coverage for larger stair areas while allowing the section to be measured and cut to suit individual tread widths.

Made from aluminium, the profile provides a rigid structure around the front edge of a stair. Its 36mm width and 20mm height create a noticeable edge treatment without relying on a bulky construction. This makes it suitable for projects where the stair covering needs a defined transition at the front of each tread.

The modern profile can also provide a more consistent appearance when several steps are finished using the same trim. Rather than treating every stair edge as a separate detail, the 2.7m length allows the installation to be planned as part of the wider staircase design.

36mm Width and 20mm Height for Practical Coverage

The dimensions are an important consideration when choosing stair nosing. At 36mm wide and 20mm high, this profile provides coverage around the stair edge while creating a visible front section.

The width should be compared with the available tread area before ordering. This is particularly important where carpet, timber or another stair covering has already been installed, as the finished surface can affect how the profile sits against the step.

The 20mm height also needs to be considered alongside the existing stair construction. A correct dimensional match helps the trim sit neatly and reduces the need for adjustments during installation.

For a staircase with multiple steps, measuring each tread before cutting is worthwhile. Even small differences between steps can affect the final appearance, particularly when profiles meet at corners or side edges.

Designed Around Carpet and Wood Stair Applications

This aluminium stair edging profile is suitable for staircases incorporating carpet or wood finishes. These materials can create different edge conditions, so the profile should be selected according to the finished tread rather than simply the underlying subfloor.

On carpeted stairs, the nosing can provide a structured edge around the front of the tread. On wood stairs, it can introduce a contrasting aluminium detail while helping create a consistent finish along the stair edge.

The profile can work particularly well where the staircase requires a modern, straightforward appearance. Aluminium has a clean visual character that can complement both contemporary interiors and practical stair installations.

Before fitting, the stair edge should be checked for loose material, uneven surfaces or other conditions that could affect the profile's position. A clean and properly prepared surface gives the installation a better starting point.

Planning Cuts and Sections Across the Staircase

The 2.7m length offers flexibility when planning a staircase with several individual treads. Depending on the width of the steps, one section can be measured and cut into suitable lengths, helping reduce unnecessary material joins.

Accurate measurement is important because each cut contributes to the finished appearance. The required length should be marked carefully, with attention given to side edges and any areas where two pieces meet.

The aluminium construction also makes the profile suitable for projects where a rigid stair-edge trim is preferred over softer edging materials. However, the installation method should always be selected according to the stair substrate and the requirements of the specific project.

Where multiple profiles are required, planning the layout before installation can help maintain consistent positioning from the first step to the last.

A Practical Choice for Residential and Light Commercial Stairs

This stair nosing can be considered for a variety of residential and light commercial staircase projects where carpet or wood finishes require an additional edge profile. Its modern appearance and longer 2.7m format make it suitable for both individual stair improvements and larger installations.

For domestic staircases, the profile can provide a more finished appearance around frequently used step edges. In offices and other light commercial interiors, it can form part of a consistent stair-edge treatment where appearance and practical finishing both matter.

The supplied specifications identify the profile as aluminium, with a 36mm width, 20mm height and 2.7m length. These measurements should be checked carefully against the actual staircase before purchase, particularly when replacing an existing nosing or matching another profile.

Frequently Asked Questions

Is this stair nosing suitable for carpet and wood?

Yes. It is suitable for stair edges finished with carpet or wood where the 36mm width and 20mm height fit the step. Check the finished tread dimensions before installation.

What is the benefit of the 2.7m length?

The 2.7m length can reduce the number of joins across longer stair runs. It is useful when a consistent appearance is preferred across several steps and accurate cutting can be planned.

What are the profile dimensions?

This stair nosing is supplied at 2.7m long, with a 36mm width and 20mm height. Check these measurements against the finished stair edge before ordering to ensure suitable coverage.

Is aluminium suitable for busy stairs?

Aluminium provides a rigid, hard-wearing profile for regularly used stair edges. Its performance will depend on correct installation, traffic levels and the condition of the supporting stair surface.

Can the profile improve stair-edge visibility?

The raised profile creates a distinct line along the front of the step. This can make the tread edge easier to identify, particularly where the stair covering has limited contrast with surrounding surfaces.

Can this profile be cut to individual step lengths?

The 2.7m section can be cut to suit individual steps when suitable cutting tools are used. Measure carefully, allow for clean end finishing, and confirm the required length before cutting.

Is 2.7m better than shorter stair nosing?

A 2.7m section is useful for longer runs and can reduce joins. Shorter sections may be easier to handle in smaller projects, so the best choice depends on stair width, layout and installation requirements.

Can it be used in homes and offices?

Yes. It can suit residential and light commercial stair projects when the dimensions and construction match the application. Always assess the substrate, finished stair covering and fixing requirements before installation.

How should I check fit before installation?

Measure the stair width, tread edge and available fixing area. Confirm that the 36mm width and 20mm height suit the finished step, then plan cuts and joins before fitting the profile.

Does the product include a brand name?

 The product content is kept brand-neutral. The supplied specification identifies an aluminium stair edging profile with a modern style and a 2.7m length, without adding the supplier's brand to the product content.

Extended LVT Stair Nosing for a Clean Edge Finish

A staircase finished with LVT needs careful attention at the exposed front of each tread. Without an appropriate edge profile, the transition between the stair surface and front edge can look incomplete and may be more difficult to finish consistently.

This 2.7m C31 stair nosing is an anodised aluminium profile intended for suitable LVT stair applications. Its extended length provides 270cm of material, giving installers more flexibility when planning longer sections or several stair edges from one profile.

The 28 x 28 x 5mm size provides a structured edge detail, while the matt, low-gloss finish gives the profile a modern appearance. It is supplied as an individual length and uses screw fixing.

Before installation, check the LVT construction, stair dimensions and available edge space to make sure the profile is compatible with the intended application.

Anodised Aluminium with a Modern Matt Finish

The anodised aluminium construction gives the profile a clean architectural appearance that can complement contemporary LVT stair designs. Unlike a highly reflective finish, the matt and low-gloss surface provides a more understated visual detail along the step edge.

The profile is available in colour options listed as silver, gold, champagne and black. This gives installers flexibility when selecting a finish that works with the surrounding stair surface and interior design.

Its 28mm width and 28mm height create a balanced edge profile, while the stated 5mm size dimension should also be considered when checking the relationship between the trim and the LVT installation.

Because stair coverings vary in thickness and construction, the profile should be checked against the specific LVT product before installation rather than assuming universal compatibility.

Planning Around the 2.7m Profile Length

The 2.7m length provides 270cm of coverage in one continuous profile. This extended format can be useful when several stair edges need to be planned from a limited number of lengths.

Accurate measurement is essential before cutting. Measure the width of the individual stair treads and consider how the 2.7m length can be divided across the project. On existing staircases, individual steps may not always have exactly the same dimensions.

Planning the cuts beforehand can help reduce unnecessary waste and make it easier to achieve consistent alignment. It is also worth considering where joins will occur if more than one section is required.

The profile should be positioned carefully so that the finished edge follows a consistent line across the stair. A clean layout is particularly noticeable when using a contrasting aluminium finish against LVT.

Screw-Fix Installation for LVT Stair Edges

The C31 profile uses screw fixing, making preparation an important part of the installation process. The stair edge and supporting surface should be checked to ensure they can accommodate the intended fixing arrangement.

Before fitting, remove loose material and make sure the installation area is stable and appropriately prepared. The LVT should also be positioned correctly so that the profile can sit consistently against the stair edge.

The supplied information describes the profile as easy to install and hard-wearing, but the quality of the finished result will still depend on accurate measurement, suitable fixing and careful alignment.

For multiple steps, maintain the same positioning from one tread to the next where the staircase construction allows. This creates a more uniform appearance and helps the long aluminium profile integrate naturally with the overall stair design.

Suitable LVT Stair Refurbishment Projects

This extended aluminium stair nosing can be considered for suitable residential and interior refurbishment projects using LVT. The modern styling and range of listed finishes make it adaptable to different decorative schemes.

It can be particularly useful when a project requires a longer profile rather than several short trims. The 2.7m format provides flexibility for planning material across multiple steps, although the actual number of treads covered will depend on their width.

The product information lists applications across areas such as hallways, kitchens, bedrooms, bathrooms, conservatories and other interior spaces. The suitability of the stair itself should always be assessed before installation, particularly where moisture or unusual substrate conditions are present.

For the best result, confirm the 28 x 28 x 5mm dimensions, LVT compatibility and screw-fixing requirements before ordering.

Frequently Asked Questions

What length is the C31 stair nosing?

The profile measures 2.7m, equivalent to 270cm or approximately 8.86ft. This extended length can provide useful coverage for several stair edges depending on the width of each individual tread.

What material is this LVT stair profile made from?

It is manufactured from anodised aluminium. The material provides a structured metal edge profile with a modern appearance suitable for appropriate LVT stair applications.

What are the profile dimensions?

The listed size is 28 x 28 x 5mm, with an item width of 28mm. Check these measurements against the LVT and stair-edge construction before installation.

How is the profile installed?

The C31 profile uses screw fixing. The supporting stair edge should be suitable for the selected fixing method, and the profile should be aligned carefully before securing it.

Is it suitable for LVT stairs?

Yes. The product is listed as an LVT profile and is intended for suitable LVT stair installations. Always check the specific LVT thickness and edge arrangement for compatibility.

What finish does the profile have?

It has a matt, low-gloss finish. This gives the aluminium a relatively subtle appearance that can complement modern LVT stair designs.

What colours are available?

The supplied specifications list silver, gold, champagne and black as available colour or wood-tone options. Availability can vary, so select the required finish when purchasing.

Can the 2.7m length be cut?

The long profile can be planned and cut to suit individual stair sections where required. Measurements should be taken carefully before cutting to minimise waste and maintain accurate joins.

Is it suitable for refurbishment work?

Yes. It can be considered for suitable LVT stair refurbishment projects where the profile dimensions and screw-fix installation method are compatible with the existing staircase.

What should I check before ordering?

Check the stair width, LVT construction, profile dimensions, available fixing area and required finish. Planning the 2.7m length around the staircase can also help determine the quantity needed.

A Clean Edge Profile for Click Vinyl Stairs

The front edge of an LVT staircase needs a finishing detail that works with the surrounding surface while providing a neat visual transition. An appropriate stair nosing can help complete the exposed edge and create a more consistent appearance across the steps.

This C24 push-in stair nosing is manufactured from aluminium and supplied as a 900mm profile. It is intended for suitable LVT stair applications and features a straight-edge design with a modern matt finish.

The push-in format is particularly relevant to installations where a profile is required to integrate with the edge of the LVT surface without relying on a visually prominent trim design. Before selecting the profile, the stair edge, LVT thickness and available installation area should be checked carefully.

Aluminium Construction with a Modern Matt Appearance

Aluminium provides a practical material choice for stair edge profiles where a firm, contemporary finishing detail is required. The matt finish gives this profile a low-gloss appearance that can sit comfortably alongside modern interior surfaces.

The straight-edge configuration keeps the profile visually simple. Rather than introducing a heavily decorative feature, it creates a defined line along the front of the stair where the LVT meets the exposed edge.

The supplied product information identifies the profile as suitable for LVT flooring applications. Compatibility should still be checked against the particular LVT product being installed, as thicknesses and edge arrangements can vary between systems.

Careful measurement is especially important when using a push-in profile. The profile needs to correspond with the available edge space and the construction of the stair so that it can be positioned correctly.

Push-In Design for LVT Stair Edges

The C24 profile uses a push-in installation approach, making the installation method an important consideration when planning the project. The stair edge should be prepared correctly so the profile can sit consistently along the intended section.

Before installation, inspect the LVT edge and surrounding substrate. Any loose material, uneven sections or damaged areas should be addressed before fitting the profile.

The 900mm length is equivalent to 90cm or 0.9m and provides a practical size for many individual stair sections. Measure the width of each step rather than assuming that every tread is identical, particularly when working with older or refurbished staircases.

The profile should be aligned carefully across the front edge to maintain a consistent appearance. A clean installation also depends on the condition of the LVT and the accuracy of the underlying stair construction.

Matching the Profile to Click Vinyl LVT

Click vinyl installations can create a clean, contemporary stair finish, but the exposed edges need to be considered as part of the overall installation. A dedicated stair nosing provides a finishing option for the front of the tread and can help connect the LVT surface with the stair edge.

The modern matt aluminium appearance can work with a variety of LVT designs, particularly where a simple metal accent is preferred. Its low-gloss finish avoids creating an overly reflective detail in the stair area.

When choosing a profile, consider more than appearance. The LVT thickness, edge construction, stair dimensions and available space all influence whether a particular nosing will be suitable.

This is especially relevant with push-in profiles, as the fit depends on the relationship between the profile and the stair edge.

Suitable for Modern Stair Refurbishment

This 900mm LVT stair nosing can be considered for residential stair refurbishment and other suitable interior projects using click vinyl or LVT surfaces. Its aluminium construction, straight edge and matt finish provide a contemporary approach to finishing the exposed front of the step.

It can also be useful where an existing stair installation requires a more consistent edge treatment. The individual pack format allows the required number of profiles to be selected according to the project.

Before ordering, measure the stair width and inspect the edge where the profile will be positioned. Confirm that the LVT construction is compatible with a push-in stair nosing and that the available space corresponds with the profile dimensions.

A properly prepared installation area and accurate alignment are important for achieving a neat result across multiple steps.

Frequently Asked Questions

What is the C24 stair nosing made from?

The C24 stair nosing is made from aluminium. It provides a practical metal edge profile for suitable LVT stair installations and has a modern matt appearance.

What length is the profile?

The profile measures 900mm, which is equivalent to 90cm or 0.9m. Measure the width of the intended stair section before ordering to confirm suitable coverage.

What type of installation does it use?

This profile uses a push-in installation method. The stair edge should be prepared correctly and checked for compatibility before the profile is positioned.

Is this profile suitable for LVT?

Yes. The supplied product information lists it as suitable for LVT applications. The specific LVT thickness and edge construction should still be checked before installation.

Does the profile have a straight edge?

Yes. The product is specified with a straight-edge design, giving the stair a simple and structured finishing detail along the exposed front edge.

What finish does the C24 have?

The profile has a matt finish with a low-gloss appearance. This provides a relatively understated aluminium look that can complement modern interior stair designs.

Can it be used with click vinyl?

It can be considered for suitable click vinyl stair installations where the LVT construction is compatible with the push-in profile. Check the edge arrangement before purchase.

Is this suitable for residential stair projects?

Yes. It can be considered for suitable residential stair refurbishment and installation projects where LVT or click vinyl is being used on the steps.

Should each stair be measured separately?

It is advisable, particularly on existing or older staircases. Small differences between individual treads can occur, so measuring helps confirm that the 900mm profile is appropriate.

What should I check before installing it?

Check the stair width, LVT thickness, edge construction and available installation space. The surface should also be stable and properly prepared before fitting the push-in profile.

A Clean Internal Corner Profile for LVT Stair Areas

When LVT is installed around stairs, the internal corners and exposed transitions require careful finishing. A suitable edge profile can help create a cleaner connection between the stair surface and adjoining areas while giving the installation a more consistent appearance.

This C31 stair nosing and internal corner profile is manufactured from aluminium and measures 28 x 28mm. With a 900mm length, it provides a practical profile size for individual stair sections and suitable refurbishment projects.

The matt finish and modern styling allow the profile to complement a range of LVT surfaces without creating an overly reflective detail. Its straight-edge design is intended for applications where a clean, structured transition is required.

Before installation, measure the stair area and check the profile dimensions against the existing LVT and substrate. This helps ensure the profile sits correctly without creating an unsuitable step or exposed gap.

Aluminium Construction with a Low-Gloss Matt Finish

Aluminium is a practical choice for stair edging because it provides a firm profile while maintaining a relatively clean and contemporary appearance. This profile has a matt, low-gloss finish that can work well with modern residential and commercial interiors.

The 28mm width and 28mm height create a balanced profile around the intended stair edge or internal corner. These dimensions should be considered alongside the thickness of the LVT and the existing stair construction before installation.

The profile is also listed as 2mm thick, giving buyers an additional measurement to consider when planning how it will meet the surrounding surface. Matching the profile to the actual installation conditions is important for achieving a neat result.

Designed Around LVT Stair Transitions

Stair installations can involve several adjoining surfaces, particularly where LVT continues from a landing or hallway onto the staircase. The C31 profile provides an edge treatment for suitable applications where a defined transition is needed around the stair area.

Its internal corner configuration makes it particularly relevant where two surfaces meet at an inside corner. Instead of leaving the junction visually unfinished, an appropriate profile can provide a more consistent edge detail.

The profile is suitable for both residential and commercial applications according to the supplied product information. However, suitability should always be considered in relation to the specific stair construction, LVT thickness and installation method.

The straight-edge design gives the finished installation a simple, modern appearance that can work alongside contemporary stair and hallway schemes.

Planning the 900mm Profile Installation

The 900mm length, equivalent to 90cm, 0.9m or approximately 3ft, should be compared with the width of the intended stair section before installation. If the area is shorter than the profile, the required length can be assessed during preparation.

The installation surface should be clean, stable and properly prepared. Existing LVT should be securely positioned, and any loose or damaged areas should be addressed before fitting the edge profile.

This product is listed with a nail-down installation method. The selected fixing approach should be suitable for the underlying substrate and installed carefully to maintain a consistent profile position.

Because the profile is only 2mm thick, the surrounding surface levels should also be considered. A well-prepared installation reduces the likelihood of an uneven transition between the profile and adjoining LVT surfaces.

Suitable for Residential and Commercial Stair Projects

This aluminium stair edge profile can be considered for residential and commercial stair areas where LVT requires a neat internal corner or finishing detail. It can work in areas such as stairs, landings and adjoining hallways where multiple surfaces meet.

Its modern matt appearance provides a relatively understated finish, making it suitable for installations where the edge trim should complement rather than dominate the surrounding design.

The profile may also be useful during refurbishment when an existing stair junction needs a more structured finishing treatment. Before ordering, check the 28 x 28mm dimensions, 900mm length, LVT thickness and substrate to ensure the profile is compatible with the project.

A careful measurement and preparation process is particularly important around stairs, where even small differences in surface height or alignment can affect the finished appearance.

Frequently Asked Questions

What is this profile used for?

This aluminium profile is intended for suitable LVT stair applications, particularly internal corners and edge transitions. It provides a structured finishing detail where adjoining stair surfaces meet.

What size is the C31 profile?

The profile measures 28 x 28mm and has a 900mm length. The overall dimensions should be compared with the available stair area before purchase and installation.

What material is the profile made from?

The profile is manufactured from aluminium. It provides a firm metal edge treatment with a modern appearance suitable for appropriate residential and commercial stair projects.

Is this profile suitable for LVT?

Yes. It is intended for LVT-related stair edging and internal corner applications. The LVT thickness and surrounding surface levels should still be checked for compatibility.

What finish does the profile have?

The product has a matt finish with a low-gloss appearance. This gives it a relatively understated look that can complement modern stair and hallway interiors.

How long is the profile?

The profile is 900mm long, which is equivalent to 90cm, 0.9m or approximately 3ft. Measure the installation area to confirm the length is suitable for the intended section.

How is this profile installed?

The supplied specification lists a nail-down installation method. The fixing approach should be appropriate for the underlying substrate and carried out according to the installation conditions.

Can it be used in commercial areas?

Yes. The product information states that it is suitable for commercial and residential applications. Actual suitability depends on the installation environment and surface construction.

Does it require underlay?

The supplied specifications state that no underlayment is required. The existing substrate and LVT installation should nevertheless be prepared correctly before fitting the profile.

Where can this stair profile be used?

It is listed for stairs, hallways, landings and kitchens. The profile should be selected according to the specific surface arrangement, dimensions and intended installation location.