Rubber Matting in 3mm or 5mm Thickness, 0.5m to 10m Lengths

This black rubber matting is available in 3mm or 5mm thicknesses, with listed lengths ranging from 0.5m to 10m. It provides a choice of flooring options for garages, parking pads, shops and offices, with concrete also listed as a suitable surface.

Choose the thickness, length and surface style to suit your intended layout. Width is equally important when calculating coverage, so check the dimensions of the selected option before ordering.

Choosing Between 3mm and 5mm Rubber Matting

The 3mm option has a lower profile, making it worth considering where clearance beneath doors or at adjoining floor levels is limited. Check the complete installation height, including any fixing materials, rather than relying on the matting thickness alone.

The 5mm option provides an additional 2mm of material. This may influence your choice where a thicker covering is preferred, but thickness alone does not establish load capacity, cushioning or suitability for vehicle use. Those requirements should be checked against the selected product’s performance information.

For either option, consider how the space will be used. Covering a pedestrian walkway presents different demands from flooring beneath a parked vehicle or heavy equipment.

Selecting a Length That Matches Your Layout

Lengths from 0.5m to 10m allow buyers to consider smaller sections or longer runs. Before selecting a length, measure the area and decide where joins will sit, particularly around doorways, workbenches and fixed fittings.

Calculate coverage using both width and length. For example, a 2m length would cover 2m² only if the selected width were 1m. The supplied specifications do not state the width, so length alone is insufficient to determine how much matting you need.

For larger areas, plan the arrangement before purchasing. Check whether your chosen dimensions are supplied as a single piece and allow for any trimming needed around the perimeter.

Smooth, Plain, Checker and Coin Style Options

The supplied listing names smooth, plain, checker and coin styles. Confirm which finish is included in your selected variant, as the title does not establish that every style is available in every thickness and length.

A smoother surface and a patterned surface differ in appearance and cleaning considerations. Raised patterns can collect debris around their contours, while a plain surface has fewer recesses to clean. Neither description, by itself, confirms a tested slip-resistance rating.

The specifications also list both “medium gloss” and “matt”. Check the selected variant’s photographs or finish details if the surface appearance is important to your purchase.

Planning Matting for a Garage, Shop or Office

Garages, parking pads, shops and offices are among the listed applications. Match the chosen option to the actual conditions in your space rather than assuming every application has the same requirements.

For garage use, confirm suitability for vehicle weight, tyre contact and any likely exposure to oil or other fluids. The supplied information does not establish oil resistance, chemical resistance or a vehicle load rating.

In a shop or office, pay attention to edges, joins and transitions between floor coverings. Matting should lie flat and remain securely positioned so it does not obstruct doors or create raised edges along walking routes.

Preparing the Surface and Confirming Installation

Before fitting, check that the underlying surface is clean, dry and free from loose debris. Inspect concrete for uneven areas that could prevent the matting from sitting flat.

The supplied details do not specify whether this product should be loose laid or bonded. Confirm the recommended installation method before purchasing adhesive or beginning the work. If bonding is required, use a fixing system suitable for both the rubber and the underlying surface.

Garage walls are also listed as an application, but vertical fitting requires separate consideration. Confirm the appropriate fixing method rather than assuming the flooring installation method applies to a wall.

Cleaning and Routine Checks

Remove loose dirt regularly and follow the product’s care instructions for deeper cleaning. Check cleaner compatibility before using solvents, degreasers or concentrated cleaning products on the rubber.

Periodically inspect exposed edges and joins for movement or lifting. Where moisture reaches the area, check beneath the matting and allow the underlying floor to dry as needed.

Frequently Asked Questions

What thicknesses are available?

The listed thickness options are 3mm and 5mm. Check that the required thickness is available with your chosen length and surface style.

What lengths can I choose?

The supplied listing gives a length range of 0.5m to 10m. Confirm the individual options available before ordering.

How do I calculate the amount of matting required?

Measure the area and calculate coverage using the selected width and length. Width has not been provided in the supplied specifications, so confirm it before calculating quantities.

Can this rubber matting be placed over concrete?

Concrete is listed as a suitable surface. Check its condition and follow the recommended preparation and fitting instructions.

Is it suitable beneath a parked car?

Garage floors and parking pads are listed applications, but no vehicle load or tyre-contact rating has been supplied. Confirm these details for the chosen variant before purchasing.

Is the rubber resistant to oil and chemicals?

Oil and chemical resistance have not been confirmed. Do not assume these properties from the material description or garage-use listing.

Does it need adhesive?

The installation method is not stated. Confirm whether the selected option requires bonding or permits loose laying.

Which surface patterns are listed?

The listing names smooth, plain, checker and coin styles. Check the selected variant to confirm its exact surface and finish.

At Rubber Fit Floors, we are committed to delivering your orders efficiently and securely to your doorstep. Here’s everything you need to know about our shipping process:

1. Shipping Destinations
We currently ship to the United Kingdom, covering all regions including mainland UK, Northern Ireland, and the Scottish Highlands. If you’re located outside the UK, please get in touch with us to discuss custom shipping options.

2. Processing Time

An order confirmation email does not constitute acceptance of your order. Acceptance occurs only when the order has been dispatched. All orders are processed within 1–2 business days.
Orders placed on weekends or holidays will be processed on the next working day.

3. Delivery Time
Standard Delivery: 3–5 business days.
Express Delivery: 1–2 business days (available at an additional charge).
Delivery times are estimates only and not guaranteed. We are not liable for delays caused by couriers or external factors.

4. Shipping Charges
Standard Delivery: £7.99 (Free for orders over £100).
Express Delivery: £24.95.
For bulky or custom orders, shipping charges will be calculated based on the weight and dimensions of your package.

5. Tracking Your Order
Once your order is dispatched, you will receive an email with a tracking link to monitor your shipment. If you do not receive this information, please contact our support team.

6. Damaged or Lost Shipments
If your order arrives damaged or is delayed beyond the expected delivery time, kindly reach out to us immediately. We will assist you with replacements, refunds, or further inquiries.

7. Contact Us
For any shipping-related questions, feel free to contact our customer support:
📧 Email: procurement@rubberfitfloors.co.uk
📞 Phone: 07404270642
Address: 9 Fiveacre Close, Thornton Heath, CR7 6AS