• 2.5m Length

• 35mm Tread Width

• Satin Aluminium Finish

• Black or Grey PVC Insert

• Slip-Resistant Stair Profile for Tiled Interior and Exterior Steps

Long-Length Protection for Tiled Stair Edges

This aluminium stair nosing is supplied in a 2.5m length, allowing it to be measured and prepared for tiled stair installations where several edges or a wider continuous section must be covered. The profile is designed to protect the exposed tile edge while creating a defined transition between the tread and riser. This is particularly useful because an uncovered tile corner can be vulnerable to repeated impact, chipping and visible wear. The longer format can also help maintain a consistent finish across a staircase when sections are planned from the same profile. Accurate measurements should be taken before ordering or altering the length, including the width of every step and the quantity required for the complete project.

Aluminium Carrier with a 35mm PVC Tread

The profile consists of an aluminium carrier combined with a PVC tread section measuring 35mm in width. The concealed base is described as hard PVC, while the visible contact surface uses softer PVC to create the slip-resistant tread. This combination gives the stair nosing a firm underlying structure with a more defined surface beneath footwear. Black and grey insert options allow the visible tread to coordinate with different tiles, stone effects and surrounding interior finishes. Two profile-depth options are listed, although their exact measurements are not included in the supplied details. The selected depth should therefore be confirmed against the tile thickness and stair construction before purchase.

R10 Slip Resistance for Frequently Used Steps

The available product information states that the PVC tread has an R10 slip-resistance classification. This makes the profile relevant for staircases in domestic, public and commercial areas where a clearly defined contact surface is required. The rating should not be treated as a guarantee that slips cannot occur, because traction can still be affected by water, grease, dust, footwear and poor maintenance. The tread must also be installed correctly and kept free from loose debris. The combination of a visible insert and a 35mm contact width can help make the stair edge more recognisable while providing practical grip along the area most frequently contacted during normal stair use.

Profile Selection for Tiles and Compatible Stone

The detailed product information confirms suitability for tiled staircases, while the product title also refers to stone applications. Tile or stone thickness, edge shape and substrate condition should all be considered when choosing between the available profile depths. The nosing should fit neatly around the finished edge without forcing the tile out of position or leaving unsupported gaps beneath the aluminium carrier. Any cracked tiles, loose stone, uneven adhesive beds or damaged stair structures should be repaired before installation begins. The supplied details do not identify the required fixing adhesive or installation process, so fitting should follow the instructions provided with the selected profile and the recommendations for the surrounding flooring material.

Interior and Exterior Care Requirements

The stair nosing is listed for both interior and exterior use, making it suitable for compatible tiled steps in homes, public buildings and commercial settings. Exterior installations require particular attention to moisture, drainage, temperature changes and the condition of the underlying stair. Once installed, loose grit should be removed regularly from the PVC tread because accumulated debris can reduce surface contact and mark the satin finish. The aluminium and PVC sections can be wiped using a mild cleaner suitable for both materials and then dried thoroughly. The profile should also be checked periodically for movement, worn tread areas or separation from the tile edge so any issue can be corrected before it becomes more extensive.

Frequently Asked Questions

Is this profile suitable for tiled staircases?

Yes. The profile is specifically described for tiled stairs and is intended to protect the exposed tile edge while creating a defined 35mm tread surface. The exact fixing method and required adhesive are not included in the supplied details, so installation should follow the product instructions and suit the tile, substrate and selected profile depth.

Can it be used with stone stair finishes?

The product title refers to tiles and stone, while the detailed description specifically confirms suitability for floor tiles. Use with natural or engineered stone should therefore be confirmed against the selected profile and installation system before fitting. Stone thickness, edge shape and adhesive compatibility can all affect whether the profile sits correctly.

What does the 35mm measurement refer to?

The 35mm measurement is listed as the width of the visible tread section. This is the contact area formed by the aluminium carrier and PVC surface at the stair edge. The product is available in two depth options, but their exact measurements are not supplied here, so the chosen variation should be checked against the tile thickness before ordering.

Is the stair nosing suitable for outdoor steps?

The product information states that the profile is suitable for both interior and exterior use. Outdoor installation still requires a sound substrate, correct drainage and an installation method appropriate for changing temperatures and moisture. The PVC tread and aluminium carrier should also be inspected regularly for movement, dirt build-up or weather-related damage.

What does the R10 slip-resistance rating mean for this product?

The listing states that the stair nosing carries an R10 slip-resistance classification. This indicates a tested level of surface grip under the relevant assessment method, but it does not make stairs completely slip-proof. Water, grease, loose debris, footwear, installation quality and maintenance can still affect traction, so the tread must be kept clean and secure.

How should the aluminium and PVC tread be cleaned?

Remove loose grit with a soft brush, cloth or suitable vacuum attachment, then wipe the satin aluminium and PVC tread with a mild cleaner compatible with both materials. Avoid harsh solvents or abrasive pads that could damage the finish or soften the insert. Inspect the profile regularly and address any lifting, movement or worn tread sections promptly.

At Rubber Fit Floors, we are committed to delivering your orders efficiently and securely to your doorstep. Here’s everything you need to know about our shipping process:

1. Shipping Destinations
We currently ship to the United Kingdom, covering all regions including mainland UK, Northern Ireland, and the Scottish Highlands. If you’re located outside the UK, please get in touch with us to discuss custom shipping options.

2. Processing Time

An order confirmation email does not constitute acceptance of your order. Acceptance occurs only when the order has been dispatched. All orders are processed within 1–2 business days.
Orders placed on weekends or holidays will be processed on the next working day.

3. Delivery Time
Standard Delivery: 3–5 business days.
Express Delivery: 1–2 business days (available at an additional charge).
Delivery times are estimates only and not guaranteed. We are not liable for delays caused by couriers or external factors.

4. Shipping Charges
Standard Delivery: £7.99 (Free for orders over £100).
Express Delivery: £24.95.
For bulky or custom orders, shipping charges will be calculated based on the weight and dimensions of your package.

5. Tracking Your Order
Once your order is dispatched, you will receive an email with a tracking link to monitor your shipment. If you do not receive this information, please contact our support team.

6. Damaged or Lost Shipments
If your order arrives damaged or is delayed beyond the expected delivery time, kindly reach out to us immediately. We will assist you with replacements, refunds, or further inquiries.

7. Contact Us
For any shipping-related questions, feel free to contact our customer support:
📧 Email: procurement@rubberfitfloors.co.uk
📞 Phone: 07404270642
Address: 9 Fiveacre Close, Thornton Heath, CR7 6AS