• 0.9m Length

• Interior Use

• Aluminium Profile

• Self-Adhesive Stair Trim

• Wood or Metal Effect Finish for Interior Stair Edges

A Neat Edge Profile for Interior Stair Finishes

This 0.9m aluminium stair nosing provides a defined finish where an interior floor covering meets the front edge of a step. The profile can help cover the exposed transition between the tread and riser, creating a more consistent appearance around an area that often shows wear before the rest of the flooring. Its retro-fit format makes it relevant for completed interiors where the stair surface is already installed and an additional finishing profile is required. The product is listed as both a stair nosing and a threshold, so its suitability will depend on the shape of the intended edge. It should not be used to conceal structural damage, loose flooring or an unstable stair base.

Wood and Metal Effects for Different Interiors

The decorative surface is available in wood-effect and metal-effect options, allowing the profile to coordinate with different flooring and interior styles. A wood-effect finish may complement timber or wood-look floors, while a metal-effect option can provide a more contemporary transition around the stair edge. The exact colours, grains and metallic tones are not identified in the supplied specifications, so the selected variation should be reviewed carefully before ordering. Decorative finishes may also appear different under natural light, artificial lighting or different screen settings. The profile should therefore be chosen as a coordinating finish rather than assuming it will provide an exact match with an existing floor.

Self-Adhesive Fitting Without Visible Screws

The stair nosing is described as self-adhesive, allowing it to be fitted without visible screw heads across the finished profile. Successful installation depends on careful preparation of the underlying surface. The stair edge should be clean, completely dry, level and free from dust, grease, polish, loose paint or unstable flooring. Position the full 0.9m strip before removing the protective backing so its alignment can be checked across the tread. Once the adhesive makes contact, repeated lifting and repositioning may weaken the bond. The source does not confirm whether additional adhesive or mechanical fixings are required for certain surfaces, so the instructions supplied with the product should be followed.

Measuring the Stair Before Installation

The profile measures 0.9m in length, which may suit many standard domestic steps, but stair widths can vary considerably between properties. Each intended tread should be measured individually rather than assuming every step is identical. The supplied information does not state the profile width, height, angle or depth, so these measurements should be confirmed from the selected product before installation. They determine how much of the tread and riser the nosing will cover and whether it will sit correctly over the existing floor transition. No approved cutting method is provided either, so the profile should not be shortened until the manufacturer’s or package guidance has been reviewed.

Maintaining the Decorative Aluminium Finish

Routine cleaning can help preserve the appearance of the wood-effect or metal-effect aluminium surface. Loose grit should be removed using a soft cloth, brush or suitable vacuum attachment because abrasive particles may gradually mark the decorative finish. The profile can then be wiped with a lightly damp cloth and a mild cleaner that is compatible with finished aluminium. Harsh chemicals, scouring pads and excessive moisture should be avoided unless specifically permitted by the care instructions. The adhesive edges should also be inspected regularly, especially at both ends of the profile. Any lifting, movement or damage should be corrected promptly so the trim does not become uneven around the stair edge.

Frequently Asked Questions

Is this product a stair nosing or a threshold?

The product title identifies it as a stair nosing, while the listed type is “threshold,” so it is best understood as an interior edge or transition profile. It should be used only where its shape matches the intended stair edge. Because the exact cross-section is not supplied, compare the physical profile with the tread and riser before fitting.

How is the aluminium stair profile installed?

The product is described as self-adhesive, which means the fitting surface should be clean, dry, level and free from dust, grease, polish or loose material. Position the profile first and confirm the alignment before removing the backing. The source does not confirm whether extra adhesive or mechanical fixings are recommended, so follow the package instructions supplied with the item.

Which wood-effect and metal-effect colours are available?

The title refers to wood-effect and metal-effect finishes, but the available product information does not identify the exact colours, grain patterns or metallic tones. Select the required variation carefully and compare it with nearby flooring under normal room lighting. Images and screen settings can make finishes appear slightly different from the physical product.

Will the 0.9m profile fit a standard staircase?

The profile length is listed as 0.9m, which may suit many standard domestic stair widths, but staircase dimensions vary. Measure each intended step before ordering rather than assuming all treads are identical. The source does not provide the profile width, height or an approved cutting method, so those details should be confirmed before trimming or installation.

Which flooring types can be used with this stair nosing?

The aluminium construction is intended for interior use, but the source does not name specific compatible floor coverings. It may work with suitable wood, laminate, vinyl or other finished surfaces only where the adhesive can form secure contact and the profile sits correctly. Do not apply it over loose flooring, unstable edges or heavily uneven surfaces.

How should the decorative aluminium surface be cleaned?

Remove loose grit with a soft cloth, brush or suitable vacuum attachment, then wipe the aluminium gently with a mild cleaner that is compatible with the selected decorative finish. Avoid abrasive pads and aggressive chemicals that may mark the wood-effect or metal-effect surface. Inspect the adhesive edges regularly and address any lifting before continued use.

At Rubber Fit Floors, we are committed to delivering your orders efficiently and securely to your doorstep. Here’s everything you need to know about our shipping process:

1. Shipping Destinations
We currently ship to the United Kingdom, covering all regions including mainland UK, Northern Ireland, and the Scottish Highlands. If you’re located outside the UK, please get in touch with us to discuss custom shipping options.

2. Processing Time

An order confirmation email does not constitute acceptance of your order. Acceptance occurs only when the order has been dispatched. All orders are processed within 1–2 business days.
Orders placed on weekends or holidays will be processed on the next working day.

3. Delivery Time
Standard Delivery: 3–5 business days.
Express Delivery: 1–2 business days (available at an additional charge).
Delivery times are estimates only and not guaranteed. We are not liable for delays caused by couriers or external factors.

4. Shipping Charges
Standard Delivery: £7.99 (Free for orders over £100).
Express Delivery: £24.95.
For bulky or custom orders, shipping charges will be calculated based on the weight and dimensions of your package.

5. Tracking Your Order
Once your order is dispatched, you will receive an email with a tracking link to monitor your shipment. If you do not receive this information, please contact our support team.

6. Damaged or Lost Shipments
If your order arrives damaged or is delayed beyond the expected delivery time, kindly reach out to us immediately. We will assist you with replacements, refunds, or further inquiries.

7. Contact Us
For any shipping-related questions, feel free to contact our customer support:
📧 Email: procurement@rubberfitfloors.co.uk
📞 Phone: 07404270642
Address: 9 Fiveacre Close, Thornton Heath, CR7 6AS