• 10m Roll

• Black Finish

• Self-Adhesive Fit

• Flexible Vinyl Rubber Profile

• Non-Slip Stair Edge Protection for Tile, Wood and Concrete

Continuous Stair Edge Coverage from a 10m Roll

This black stair nosing is supplied as a 10m unit, making it practical for projects involving several steps rather than a single short profile. A continuous roll allows the required stair edges to be planned from one matching length, helping maintain a consistent appearance throughout the staircase. The profile is intended to cover and define the exposed area where the tread meets the riser, which commonly experiences repeated contact from footwear. Its modern black finish can coordinate with a wide range of flooring colours while creating a clearly visible border along each step. Before installation, calculate the total length required across all intended steps and allow for any fitting adjustments specified in the supplied instructions.

Flexible PVC and Vinyl Rubber Construction

The profile is described as being made from PVC, rubber and vinyl rubber, creating a flexible stair-edge protector rather than a rigid metal nosing. This flexibility can make the trim easier to position against compatible stair profiles, provided the surface underneath is stable and correctly prepared. The supplier also describes the product as adjustable, although no specific adjustment or cutting method is provided in the available details. Any alteration should therefore be completed only after checking the instructions included with the product. The trim should sit evenly across the edge without twisting, stretching or leaving raised sections that could affect the finished appearance or create an unwanted obstruction.

A Defined Non-Slip Contact Area at the Step Edge

The non-slip finish creates a more distinct contact surface at the front of each tread, where footwear commonly lands during normal stair use. It can also make the stair edge easier to identify against tile, wood or concrete, particularly where the black profile contrasts with the surrounding floor. This feature should not be interpreted as making the staircase completely slip-proof. Water, dust, loose debris, unsuitable footwear and poor installation can still affect grip. Regular cleaning and inspection remain important, and any section that begins to lift, move or become damaged should be corrected before the staircase returns to normal use.

Preparing Tile, Wood and Concrete for Adhesive Fitting

The stair nosing is described as self-adhesive and recommended for tile, wood and concrete surfaces. For effective contact, the stair edge should be firm, level, clean and completely dry before the protective backing is removed. Grease, polish, dust, crumbling concrete, loose paint and unstable floor coverings can prevent the adhesive from forming consistent contact. Position the profile first and check the alignment before pressing it onto the surface, as repeated lifting may weaken the adhesive. The supplied information also states that fixings are included but does not identify their type or explain how they should be used alongside the adhesive, so the package instructions should be reviewed before fitting begins.

Measuring the Profile and Maintaining the Finished Edge

Accurate measurement is especially important because the supplier specifications contain different width figures. One entry lists the roll dimensions as 10m x 7.5cm, while another gives an item width of 1.97 inches and a height of 1 inch. These measurements are not equivalent and should be confirmed against the selected product variation before purchase. Once installed, the trim can be maintained by removing loose dirt and wiping it with a mild cleaner suitable for PVC and rubber. Avoid harsh solvents or abrasive tools unless permitted by the care instructions. Periodic checks around the adhesive edges and any supplied fixing points will help identify movement before it develops into a larger fitting problem.

Frequently Asked Questions

Is this stair nosing suitable for tiled steps?

Yes, tile is listed as one of the recommended surfaces. The tile should be firmly fixed, level, clean and completely dry before installation. Dust, grease, polish or moisture can reduce adhesive contact. Because tile finishes vary, test positioning first and confirm that the profile sits flat without rocking across grout lines or uneven edges.

Can it be used on wooden and concrete stairs?

Wood and concrete are also listed as suitable stair surfaces. On wood, remove dust, wax and loose coatings before fitting. Concrete should be sound, smooth enough for consistent contact and free from crumbling material. The condition of the base matters as much as the adhesive, so do not apply the trim over unstable, damp or contaminated stair edges.

Does the non-slip finish prevent every possible slip?

No stair edging can make a staircase completely slip-proof. The textured, non-slip finish is intended to improve contact at the tread edge, but performance can still be affected by water, dust, loose debris, footwear and incorrect fitting. Keep the profile clean, inspect it for lifting or damage and correct any movement before the step is used again.

How is the 10m stair edging installed?

The product is described as self-adhesive, so the fitting surface should be measured, cleaned and dried before the backing is pressed into place. Check alignment before making contact because repeated repositioning can weaken the bond. The supplied information also states that fixings are included, but it does not identify their type, so review the package instructions before use.

What width and height does the profile have?

The supplied specifications are not fully consistent. One entry lists dimensions of 10m x 7.5cm, while another lists an item width of 1.97 inches and a height of 1 inch. These figures should not be treated as interchangeable. Confirm the exact cross-section shown for the selected variation before ordering, particularly where clearance around the tread and riser is limited.

Can the roll be shortened for individual steps?

The product is supplied as a 10m unit and is described as adjustable, but the source details do not state an approved cutting method or name a suitable tool. Check the instructions included with the product before shortening it. Any cut edge should remain straight, neat and securely fitted so it does not create a raised corner or an obstruction on the staircase.

How should the black stair edge trim be cleaned?

Remove loose grit regularly with a soft brush, cloth or suitable vacuum attachment. Wipe the surface using a mild cleaner that is compatible with PVC and rubber, then dry it thoroughly. Avoid harsh solvents or abrasive tools unless the care instructions specifically permit them. Inspect the adhesive edges and any supplied fixings during cleaning for early signs of movement.

At Rubber Fit Floors, we are committed to delivering your orders efficiently and securely to your doorstep. Here’s everything you need to know about our shipping process:

1. Shipping Destinations
We currently ship to the United Kingdom, covering all regions including mainland UK, Northern Ireland, and the Scottish Highlands. If you’re located outside the UK, please get in touch with us to discuss custom shipping options.

2. Processing Time

An order confirmation email does not constitute acceptance of your order. Acceptance occurs only when the order has been dispatched. All orders are processed within 1–2 business days.
Orders placed on weekends or holidays will be processed on the next working day.

3. Delivery Time
Standard Delivery: 3–5 business days.
Express Delivery: 1–2 business days (available at an additional charge).
Delivery times are estimates only and not guaranteed. We are not liable for delays caused by couriers or external factors.

4. Shipping Charges
Standard Delivery: £7.99 (Free for orders over £100).
Express Delivery: £24.95.
For bulky or custom orders, shipping charges will be calculated based on the weight and dimensions of your package.

5. Tracking Your Order
Once your order is dispatched, you will receive an email with a tracking link to monitor your shipment. If you do not receive this information, please contact our support team.

6. Damaged or Lost Shipments
If your order arrives damaged or is delayed beyond the expected delivery time, kindly reach out to us immediately. We will assist you with replacements, refunds, or further inquiries.

7. Contact Us
For any shipping-related questions, feel free to contact our customer support:
📧 Email: procurement@rubberfitfloors.co.uk
📞 Phone: 07404270642
Address: 9 Fiveacre Close, Thornton Heath, CR7 6AS