Extended LVT Stair Nosing for a Clean Edge Finish

A staircase finished with LVT needs careful attention at the exposed front of each tread. Without an appropriate edge profile, the transition between the stair surface and front edge can look incomplete and may be more difficult to finish consistently.

This 2.7m C31 stair nosing is an anodised aluminium profile intended for suitable LVT stair applications. Its extended length provides 270cm of material, giving installers more flexibility when planning longer sections or several stair edges from one profile.

The 28 x 28 x 5mm size provides a structured edge detail, while the matt, low-gloss finish gives the profile a modern appearance. It is supplied as an individual length and uses screw fixing.

Before installation, check the LVT construction, stair dimensions and available edge space to make sure the profile is compatible with the intended application.

Anodised Aluminium with a Modern Matt Finish

The anodised aluminium construction gives the profile a clean architectural appearance that can complement contemporary LVT stair designs. Unlike a highly reflective finish, the matt and low-gloss surface provides a more understated visual detail along the step edge.

The profile is available in colour options listed as silver, gold, champagne and black. This gives installers flexibility when selecting a finish that works with the surrounding stair surface and interior design.

Its 28mm width and 28mm height create a balanced edge profile, while the stated 5mm size dimension should also be considered when checking the relationship between the trim and the LVT installation.

Because stair coverings vary in thickness and construction, the profile should be checked against the specific LVT product before installation rather than assuming universal compatibility.

Planning Around the 2.7m Profile Length

The 2.7m length provides 270cm of coverage in one continuous profile. This extended format can be useful when several stair edges need to be planned from a limited number of lengths.

Accurate measurement is essential before cutting. Measure the width of the individual stair treads and consider how the 2.7m length can be divided across the project. On existing staircases, individual steps may not always have exactly the same dimensions.

Planning the cuts beforehand can help reduce unnecessary waste and make it easier to achieve consistent alignment. It is also worth considering where joins will occur if more than one section is required.

The profile should be positioned carefully so that the finished edge follows a consistent line across the stair. A clean layout is particularly noticeable when using a contrasting aluminium finish against LVT.

Screw-Fix Installation for LVT Stair Edges

The C31 profile uses screw fixing, making preparation an important part of the installation process. The stair edge and supporting surface should be checked to ensure they can accommodate the intended fixing arrangement.

Before fitting, remove loose material and make sure the installation area is stable and appropriately prepared. The LVT should also be positioned correctly so that the profile can sit consistently against the stair edge.

The supplied information describes the profile as easy to install and hard-wearing, but the quality of the finished result will still depend on accurate measurement, suitable fixing and careful alignment.

For multiple steps, maintain the same positioning from one tread to the next where the staircase construction allows. This creates a more uniform appearance and helps the long aluminium profile integrate naturally with the overall stair design.

Suitable LVT Stair Refurbishment Projects

This extended aluminium stair nosing can be considered for suitable residential and interior refurbishment projects using LVT. The modern styling and range of listed finishes make it adaptable to different decorative schemes.

It can be particularly useful when a project requires a longer profile rather than several short trims. The 2.7m format provides flexibility for planning material across multiple steps, although the actual number of treads covered will depend on their width.

The product information lists applications across areas such as hallways, kitchens, bedrooms, bathrooms, conservatories and other interior spaces. The suitability of the stair itself should always be assessed before installation, particularly where moisture or unusual substrate conditions are present.

For the best result, confirm the 28 x 28 x 5mm dimensions, LVT compatibility and screw-fixing requirements before ordering.

Frequently Asked Questions

What length is the C31 stair nosing?

The profile measures 2.7m, equivalent to 270cm or approximately 8.86ft. This extended length can provide useful coverage for several stair edges depending on the width of each individual tread.

What material is this LVT stair profile made from?

It is manufactured from anodised aluminium. The material provides a structured metal edge profile with a modern appearance suitable for appropriate LVT stair applications.

What are the profile dimensions?

The listed size is 28 x 28 x 5mm, with an item width of 28mm. Check these measurements against the LVT and stair-edge construction before installation.

How is the profile installed?

The C31 profile uses screw fixing. The supporting stair edge should be suitable for the selected fixing method, and the profile should be aligned carefully before securing it.

Is it suitable for LVT stairs?

Yes. The product is listed as an LVT profile and is intended for suitable LVT stair installations. Always check the specific LVT thickness and edge arrangement for compatibility.

What finish does the profile have?

It has a matt, low-gloss finish. This gives the aluminium a relatively subtle appearance that can complement modern LVT stair designs.

What colours are available?

The supplied specifications list silver, gold, champagne and black as available colour or wood-tone options. Availability can vary, so select the required finish when purchasing.

Can the 2.7m length be cut?

The long profile can be planned and cut to suit individual stair sections where required. Measurements should be taken carefully before cutting to minimise waste and maintain accurate joins.

Is it suitable for refurbishment work?

Yes. It can be considered for suitable LVT stair refurbishment projects where the profile dimensions and screw-fix installation method are compatible with the existing staircase.

What should I check before ordering?

Check the stair width, LVT construction, profile dimensions, available fixing area and required finish. Planning the 2.7m length around the staircase can also help determine the quantity needed.

At Rubber Fit Floors, we are committed to delivering your orders efficiently and securely to your doorstep. Here’s everything you need to know about our shipping process:

1. Shipping Destinations
We currently ship to the United Kingdom, covering all regions including mainland UK, Northern Ireland, and the Scottish Highlands. If you’re located outside the UK, please get in touch with us to discuss custom shipping options.

2. Processing Time

An order confirmation email does not constitute acceptance of your order. Acceptance occurs only when the order has been dispatched. All orders are processed within 1–2 business days.
Orders placed on weekends or holidays will be processed on the next working day.

3. Delivery Time
Standard Delivery: 3–5 business days.
Express Delivery: 1–2 business days (available at an additional charge).
Delivery times are estimates only and not guaranteed. We are not liable for delays caused by couriers or external factors.

4. Shipping Charges
Standard Delivery: £7.99 (Free for orders over £100).
Express Delivery: £24.95.
For bulky or custom orders, shipping charges will be calculated based on the weight and dimensions of your package.

5. Tracking Your Order
Once your order is dispatched, you will receive an email with a tracking link to monitor your shipment. If you do not receive this information, please contact our support team.

6. Damaged or Lost Shipments
If your order arrives damaged or is delayed beyond the expected delivery time, kindly reach out to us immediately. We will assist you with replacements, refunds, or further inquiries.

7. Contact Us
For any shipping-related questions, feel free to contact our customer support:
📧 Email: procurement@rubberfitfloors.co.uk
📞 Phone: 07404270642
Address: 9 Fiveacre Close, Thornton Heath, CR7 6AS