1.5m Width, 3mm Thickness and Flooring Dimensions

This heavy-duty rubber flooring matting has a 1.5m width and a 3mm thickness, making these key measurements useful when planning floor coverage. The supplied information does not specify the roll length, so check the required coverage before ordering. Available finish descriptions include chequer, coin, 5-bar and fine ribbed patterns.

Heavy-Duty Rubber Flooring for Garages and Workshops

Rubber flooring matting can provide a practical surface covering for areas that experience regular everyday use. This 3mm rubber matting is listed for garage floors, workshops, shops and concrete surfaces, offering a versatile option for suitable indoor flooring projects. Its black colour and matt finish can suit utility spaces where a straightforward, functional appearance is preferred.

When choosing flooring for a garage or workshop, consider the existing floor condition, the activities carried out in the space and the level of coverage required. The 1.5m width is useful when planning how the matting will sit across the floor, while the 3mm thickness should be considered in relation to the intended application and any height differences around doorways or adjoining surfaces.

Chequer, Coin, 5-Bar and Fine Ribbed Surface Finishes

The product title references several surface patterns: chequer, coin, 5-bar and fine ribbed. These textured finishes offer different visual appearances, so it is important to confirm which specific pattern is supplied with the selected listing or variation before ordering.

A suitable surface pattern can help create a floor finish that matches the appearance and practical requirements of a workspace. However, the supplied details do not establish that every pattern is available in every variation, nor do they provide a tested slip-resistance rating. Check the selected option carefully if the surface design is important to your project.

Moisture-Resistant Rubber Matting for Practical Spaces

The supplied product information describes the matting as hard-wearing and moisture resistant. These characteristics may be relevant in garages, workshops and other utility areas where floors can encounter routine dirt or occasional moisture. The listing does not, however, specify waterproof performance, chemical resistance or suitability for prolonged exposure to standing water.

Before installation, assess the floor conditions and the type of use expected in the room. Cleaning requirements, vehicle traffic, equipment loads and exposure to liquids can all influence the suitability of a flooring material. Where more demanding performance is required, confirm the relevant limits with the seller rather than assuming that general moisture resistance covers every condition.

Glue-Down, Adhesive and Loose-Lay Installation Options

The listed installation methods include glue down, adhesive and loose lay. The appropriate approach depends on the condition of the subfloor, the layout of the room and the intended use of the flooring. A clean, stable and suitably prepared surface is an important starting point for achieving a neat installation.

For adhesive installation, check that the chosen adhesive is compatible with the rubber material and the subfloor. If loose laying is being considered, assess whether the matting can remain suitably positioned under the expected conditions. The supplied information does not specify whether adhesive is included, so confirm any additional materials required before beginning the project.

Planning Coverage for Garage and Workshop Floors

The 1.5m width is an important measurement when calculating the amount of flooring required. Measure the area carefully and confirm the roll length before estimating the total coverage, because the length is not included in the supplied listing details. For larger rooms, also consider how separate sections will meet and whether the layout will create visible joins.

Check the thickness where the matting meets doorways, floor transitions or fixed equipment. At 3mm, the matting adds a layer over the existing surface, but the suitability of that thickness depends on the site requirements. Careful preparation and measurement can help reduce waste and make installation planning more straightforward.

Frequently Asked Questions

What is the thickness of this rubber flooring matting?

The supplied item specifications state a thickness of 3mm. This measurement can help when assessing floor-height changes, door clearances and transitions to adjoining surfaces. Check the requirements of your installation area before ordering, particularly where the flooring needs to fit beneath doors or around fixed equipment.

How wide is the rubber flooring roll?

The listed item width is 1.5m. This is useful when calculating how the matting may cover a garage, workshop or shop floor. The roll length has not been provided in the supplied details, so confirm the available length before calculating the total area covered by an order.

Which surface patterns are mentioned?

The product title mentions chequer, coin, 5-bar and fine ribbed finishes. These refer to different surface patterns, but the information supplied does not confirm whether all patterns are available in one product variation. Check the selected listing option to ensure you receive the finish you require.

Is this rubber matting suitable for a garage floor?

The listing identifies the garage as a suitable room and includes garage floors among the intended applications. Suitability will still depend on the floor condition, expected traffic, moisture exposure and installation method. Check the requirements of your garage before selecting the matting.

Can the matting be installed on concrete?

Concrete is included in the supplied suitable-surface information. Before installation, make sure the concrete floor is stable and prepared according to the instructions for the chosen fitting method. If adhesive is used, confirm that it is compatible with both the rubber matting and the concrete surface.

Is the rubber matting moisture resistant?

The listing describes the matting as moisture resistant. However, it does not provide a specific waterproof rating or confirm suitability for standing water, prolonged dampness or every type of liquid exposure. Review the intended conditions and seek further product information if moisture performance is a critical requirement.

What installation methods are listed?

The supplied specifications list glue-down, adhesive and loose-lay installation. The most suitable option depends on the subfloor, room layout and expected use. Confirm the recommended method before installation and check whether separate adhesive or other fitting materials must be purchased.

Is adhesive included with the flooring?

The supplied information lists adhesive-related installation methods but does not state whether adhesive is included with the product. Check the full listing or ask the seller what is supplied. This helps you plan the installation and budget for any additional materials that may be required.

Is this flooring suitable for workshops and shops?

The listing identifies workshop floors and shops among the suitable applications. Before using the matting in a particular workspace, consider foot traffic, equipment, cleaning practices and the condition of the subfloor. For unusually demanding environments, confirm the product's performance limits before purchase.

What should I check before ordering?

Confirm the 1.5m width, 3mm thickness, desired surface pattern and intended installation method. You should also establish the roll length, which is not specified in the supplied details, and calculate the area you need to cover. Checking these details helps you choose a suitable quantity and plan the project more accurately.

At Rubber Fit Floors, we are committed to delivering your orders efficiently and securely to your doorstep. Here’s everything you need to know about our shipping process:

1. Shipping Destinations
We currently ship to the United Kingdom, covering all regions including mainland UK, Northern Ireland, and the Scottish Highlands. If you’re located outside the UK, please get in touch with us to discuss custom shipping options.

2. Processing Time

An order confirmation email does not constitute acceptance of your order. Acceptance occurs only when the order has been dispatched. All orders are processed within 1–2 business days.
Orders placed on weekends or holidays will be processed on the next working day.

3. Delivery Time
Standard Delivery: 3–5 business days.
Express Delivery: 1–2 business days (available at an additional charge).
Delivery times are estimates only and not guaranteed. We are not liable for delays caused by couriers or external factors.

4. Shipping Charges
Standard Delivery: £7.99 (Free for orders over £100).
Express Delivery: £24.95.
For bulky or custom orders, shipping charges will be calculated based on the weight and dimensions of your package.

5. Tracking Your Order
Once your order is dispatched, you will receive an email with a tracking link to monitor your shipment. If you do not receive this information, please contact our support team.

6. Damaged or Lost Shipments
If your order arrives damaged or is delayed beyond the expected delivery time, kindly reach out to us immediately. We will assist you with replacements, refunds, or further inquiries.

7. Contact Us
For any shipping-related questions, feel free to contact our customer support:
📧 Email: procurement@rubberfitfloors.co.uk
📞 Phone: 07404270642
Address: 9 Fiveacre Close, Thornton Heath, CR7 6AS