A Practical Profile for Defined Stair Edges

The front edge of a staircase is one of the areas most exposed to repeated foot contact. A properly fitted stair nosing provides a dedicated profile across this section, helping create a cleaner edge while adding a non-slip surface where people naturally place their feet.

This 900mm anodised aluminium stair nosing has a 35 x 35mm profile and is designed for stair-edge applications where a structured, modern finish is required. The aluminium construction provides a firm profile, while the anodised finish gives the surface a more refined appearance suitable for a range of interior stair designs.

The 900mm length makes the profile suitable for individual stair sections that can be covered within this measurement. Before installation, measure the complete stair width to confirm the required coverage and determine whether additional sections are needed.

Anodised Aluminium for a Clean Modern Appearance

Anodised aluminium is well suited to stair edging where both appearance and a rigid profile are important. The anodised surface gives the aluminium a finished exterior while maintaining the clean appearance associated with metal stair trims.

The 35 x 35mm dimensions provide a substantial profile around the leading edge of the step. This makes accurate measurement particularly important because the profile needs to sit correctly against the stair without creating an unsuitable projection.

The modern styling also allows the nosing to work alongside contemporary stair finishes. For refurbishment projects, the existing tread and riser should be checked first to ensure the dimensions and appearance of the profile complement the staircase.

Non-Slip Support Along the Step Front

A stair's leading edge receives regular foot placement as people move between levels. This profile is specified as non-slip, providing a grip-focused surface along the front of the step.

Correct positioning is important for achieving a consistent result. The nosing should run evenly across the stair edge and be firmly secured so that it remains properly aligned during normal use.

The non-slip profile is particularly relevant for frequently used interior stairs where maintaining a clearly finished and practical step edge is part of the overall refurbishment or installation project.

900mm Length and Screw-Fixed Installation

The 900mm length provides a practical section for individual stair edges that fall within this measurement. Measure the full width of each step before installation rather than assuming that one section will suit every staircase.

Screws are supplied with the product, allowing the profile to be mechanically fixed to a suitable stair substrate. Before fitting, the installation area should be clean, dry and stable, with loose or damaged material addressed beforehand.

Position the nosing carefully along the front edge and mark the fixing points before securing it. Maintaining an even position across the full 900mm length helps produce a cleaner finished appearance.

The suitability of the supplied screws should be considered alongside the construction of the staircase. Different substrates may require different preparation methods, so the fixing process should be adapted to the actual stair structure.

Suitable for Stair Refurbishment and Interior Projects

This anodised aluminium stair nosing can be considered for domestic and suitable commercial interior stair applications where a modern non-slip edge profile is required. It provides a practical option for refurbishment projects as well as new stair installations.

When choosing a stair nosing, the profile dimensions, stair width, substrate and fixing method should all be considered together. The 35 x 35mm profile is relatively substantial, so checking the available tread area is especially important before ordering.

The aluminium construction, anodised finish, non-slip profile and supplied screws combine to provide a straightforward stair-edge solution where the dimensions match the requirements of the project.

For the best installation result, ensure the stair surface is stable and accurately measured before fixing. A properly aligned profile not only gives the staircase a cleaner appearance but also helps maintain consistent coverage along the entire step edge.

Frequently Asked Questions

What are the dimensions of this stair nosing?

The stair nosing measures 900mm in length with a 35 x 35mm profile. These dimensions determine the length and edge coverage provided by each section, so the stair should be measured before purchasing.

Is this stair nosing made from aluminium?

Yes. The profile is manufactured from aluminium and has an anodised finish. This provides a rigid metal stair-edge profile with a clean appearance suitable for appropriate interior stair applications.

Is the profile non-slip?

Yes. The product is specified as a non-slip stair edge nosing. It is designed to provide a grip-focused surface along the leading section of the stair tread.

Are screws supplied?

Yes. Screws are included with the product. The appropriate fixing approach should still be assessed according to the material and construction of the individual staircase.

What does anodised aluminium mean for this stair trim?

Anodising provides a finished surface to the aluminium profile and gives it a clean, modern appearance. It is commonly used where an aluminium trim needs a more refined surface finish.

Can one 900mm profile cover a complete stair?

It depends on the width of the individual stair. If the stair edge is 900mm or less, one section may provide the required length, subject to the installation layout and desired coverage.

Is the 35 x 35mm profile suitable for every staircase?

Not necessarily. The 35 x 35mm dimensions should be compared with the available tread and stair-edge area before purchase. Measuring the staircase helps confirm whether the profile will sit correctly.

Can this be used for stair refurbishment?

Yes. It can be considered for suitable refurbishment projects where an existing stair requires a new edge profile. The condition of the substrate should be checked before installation.

What should I check before installing the nosing?

Check the stair width, profile dimensions, substrate condition and fixing requirements. The installation area should be clean, dry and stable so the profile can be positioned accurately.

Is this stair nosing suitable for commercial areas?

It may be suitable for appropriate interior commercial applications where the profile dimensions and fixing method match the staircase. The expected traffic level and substrate should be assessed before installation.

At Rubber Fit Floors, we are committed to delivering your orders efficiently and securely to your doorstep. Here’s everything you need to know about our shipping process:

1. Shipping Destinations
We currently ship to the United Kingdom, covering all regions including mainland UK, Northern Ireland, and the Scottish Highlands. If you’re located outside the UK, please get in touch with us to discuss custom shipping options.

2. Processing Time

An order confirmation email does not constitute acceptance of your order. Acceptance occurs only when the order has been dispatched. All orders are processed within 1–2 business days.
Orders placed on weekends or holidays will be processed on the next working day.

3. Delivery Time
Standard Delivery: 3–5 business days.
Express Delivery: 1–2 business days (available at an additional charge).
Delivery times are estimates only and not guaranteed. We are not liable for delays caused by couriers or external factors.

4. Shipping Charges
Standard Delivery: £7.99 (Free for orders over £100).
Express Delivery: £24.95.
For bulky or custom orders, shipping charges will be calculated based on the weight and dimensions of your package.

5. Tracking Your Order
Once your order is dispatched, you will receive an email with a tracking link to monitor your shipment. If you do not receive this information, please contact our support team.

6. Damaged or Lost Shipments
If your order arrives damaged or is delayed beyond the expected delivery time, kindly reach out to us immediately. We will assist you with replacements, refunds, or further inquiries.

7. Contact Us
For any shipping-related questions, feel free to contact our customer support:
📧 Email: procurement@rubberfitfloors.co.uk
📞 Phone: 07404270642
Address: 9 Fiveacre Close, Thornton Heath, CR7 6AS