• V1 Profile

• 900mm Length

• 46mm x 30mm Size

• Screw-Down Aluminium Nosing

• Anti-Slip Stair Edge Trim in Silver, Grey or Black Options

Protecting Exposed Stair Edges

The front edge of a step receives repeated contact from footwear and can gradually become marked, chipped or worn. This aluminium stair nosing provides a defined covering around the edge while adding a contrasting pad across the main contact area.

Its practical profile makes it suitable for finishing new stairs or updating existing steps where additional edge protection is required. The aluminium construction creates a neat, structured appearance that can work with a variety of domestic flooring and staircase finishes.

Understanding the 46mm x 30mm V1 Profile

The nosing measures approximately 46mm across the upper section and 30mm down the front face. These dimensions allow it to cover both the top edge and the visible vertical section at the front of the step.

Each profile is 900mm, or approximately 3ft, long. The staircase width should be measured before ordering to confirm whether the profile can be installed at its supplied length or needs to be cut for a more accurate fit.

The V1 shape is designed to sit around the step edge rather than covering the entire tread. This preserves the appearance of the existing flooring while creating a clearly defined transition at the front of each stair.

Anti-Slip Pad and Available Colours

An anti-slip pad is positioned across the upper section of the nosing to provide additional surface texture where the foot is likely to make contact with the stair edge. The pad should be kept clean and free from dust, moisture and loose debris to support consistent traction.

Silver, grey and black colour options allow the profile to be coordinated with different staircase materials and interior finishes. Silver offers a traditional metallic appearance, while grey and black can provide stronger contrast against lighter flooring.

The exact appearance may vary according to the selected option and surrounding lighting. Colour should therefore be chosen according to both the staircase finish and the level of visual contrast required.

Screw-Down and Adhesive Installation Options

This stair nosing is designed primarily for screw-down installation, and screws are supplied with the product. Mechanical fixing can provide a secure connection when the underlying stair material is suitable for drilling and the profile is correctly aligned.

The profile may also be stuck down when required. The appropriate adhesive will depend on the flooring surface, stair construction and expected level of use. Any adhesive used should be compatible with both aluminium and the material underneath.

Before installation, the step should be clean, level and structurally sound. The profile should be measured and positioned carefully before drilling, cutting or applying adhesive. Professional fitting may be advisable where the stair material or fixing requirements are uncertain.

Suitable Use and Routine Maintenance

The aluminium profile is intended for stair edges and can be used in different rooms where a compatible step surface is present. Its compact 900mm format makes it particularly suitable for standard domestic stair widths, although measurements should always be checked before purchase.

Cleaning should be carried out using methods suitable for aluminium and the anti-slip pad. Abrasive tools or aggressive chemicals may affect the surface appearance and should be avoided unless confirmed as compatible.

The screws, profile and pad should be checked periodically for signs of movement or damage. A loose stair nosing can create an uneven edge, so any movement should be addressed before the staircase continues to receive regular use.

Frequently Asked Questions

What are the dimensions of this stair nosing?

The complete profile measures approximately 900mm long, 46mm across the upper section and 30mm down the front face. These measurements should be compared with the width and shape of the intended step before ordering, as staircase dimensions can vary between properties and installations.

Are installation screws supplied?

Yes, screws are supplied for the primary screw-down installation method. The underlying stair surface must be suitable for drilling and mechanical fixing. Always check for concealed pipes, cables or unsuitable materials before drilling into an existing staircase or floor structure.

Can the aluminium nosing be installed with adhesive?

The product information states that it can also be stuck down when required. The adhesive is not confirmed as included, and the correct product will depend on the aluminium profile and the underlying flooring material. The surface must be clean, dry, level and compatible with the chosen adhesive.

Does the profile need to be cut before fitting?

That depends on the width of the staircase. Each profile is supplied at 900mm, or approximately 3ft, long. Measure every relevant step before cutting because widths may vary slightly. Cutting should be completed using equipment suitable for aluminium to avoid damaging or distorting the profile.

What is the purpose of the anti-slip pad?

The pad adds surface texture across the upper contact area of the stair nosing. It should be kept free from dust, grease, water and loose material because contamination can affect traction. The nosing does not remove the need for careful installation and routine staircase maintenance.

Which colour should I choose?

Silver creates a visible metallic finish that can coordinate with modern fittings, while grey provides a softer neutral appearance. Black usually creates stronger contrast against pale flooring. The most appropriate option depends on the surrounding floor colour, interior design and visibility required.

Can this nosing be fitted over any stair covering?

The supplied information confirms general suitability for stairs but does not identify every compatible flooring material. Installation will depend on the stability, thickness and construction of the existing surface. Check that the profile sits evenly and that the selected fixing method is appropriate before fitting.

At Rubber Fit Floors, we are committed to delivering your orders efficiently and securely to your doorstep. Here’s everything you need to know about our shipping process:

1. Shipping Destinations
We currently ship to the United Kingdom, covering all regions including mainland UK, Northern Ireland, and the Scottish Highlands. If you’re located outside the UK, please get in touch with us to discuss custom shipping options.

2. Processing Time

An order confirmation email does not constitute acceptance of your order. Acceptance occurs only when the order has been dispatched. All orders are processed within 1–2 business days.
Orders placed on weekends or holidays will be processed on the next working day.

3. Delivery Time
Standard Delivery: 3–5 business days.
Express Delivery: 1–2 business days (available at an additional charge).
Delivery times are estimates only and not guaranteed. We are not liable for delays caused by couriers or external factors.

4. Shipping Charges
Standard Delivery: £7.99 (Free for orders over £100).
Express Delivery: £24.95.
For bulky or custom orders, shipping charges will be calculated based on the weight and dimensions of your package.

5. Tracking Your Order
Once your order is dispatched, you will receive an email with a tracking link to monitor your shipment. If you do not receive this information, please contact our support team.

6. Damaged or Lost Shipments
If your order arrives damaged or is delayed beyond the expected delivery time, kindly reach out to us immediately. We will assist you with replacements, refunds, or further inquiries.

7. Contact Us
For any shipping-related questions, feel free to contact our customer support:
📧 Email: procurement@rubberfitfloors.co.uk
📞 Phone: 07404270642
Address: 9 Fiveacre Close, Thornton Heath, CR7 6AS