12mm thick

Black PVC tile

47cm square format

Textured non-slip surface

Interlocking garage flooring for workshops and gyms

A Practical Floor Upgrade for Garages and Workshops

These 12mm interlocking garage flooring tiles provide a practical way to cover worn, marked or unfinished floors without committing to a permanently fixed flooring system. Each tile measures 47cm x 47cm and connects with adjoining pieces to create a continuous modular surface.

The recycled PVC construction is designed for demanding areas such as domestic garages, workshops, utility spaces and home exercise rooms. Its matt black finish creates a clean, functional appearance while helping everyday dirt and tyre marks appear less prominent than they may on lighter flooring.

Individual tiles can be removed and replaced when necessary. This is particularly useful in working environments where one section may experience more wear, staining or accidental damage than the rest of the floor.

How the 12mm Construction Supports Everyday Use

At 12mm thick, the tile provides a more substantial surface than thin decorative floor coverings. It is intended for areas where regular foot traffic, tools, storage equipment and general workshop activity may place additional demands on the flooring.

The thickness also helps separate equipment and footwear from the original concrete or tiled surface underneath. However, the supplier has not provided a maximum weight or point-load rating. Suitability for vehicle jacks, heavy machinery or concentrated equipment loads should therefore be assessed before installation.

Where heavy equipment has narrow feet or wheels, suitable load-distribution boards may be needed to reduce pressure on individual sections of the floor.

Textured Surface for Better Footing

The textured finish is designed to provide useful traction during normal garage, workshop and exercise-room use. This can make the surface more practical than smooth PVC flooring in areas where dust or occasional moisture may be present.

No flooring surface can eliminate every slipping risk. Oil, grease, chemicals and standing water should be cleaned promptly because contamination can reduce surface grip regardless of the texture.

The matt finish contributes to the tile’s practical appearance and avoids the highly reflective look associated with polished flooring. It can work well in functional areas where durability and straightforward maintenance are more important than a decorative finish.

Interlocking Installation Without a Complicated Floor Build

Each square tile connects through its interlocking edges, allowing the floor to be assembled section by section. The modular design makes it possible to cover a complete room or create a defined working area around storage, benches or gym equipment.

Installation should begin on a clean, dry and level subfloor. Loose material, raised concrete, damaged tiles or significant floor unevenness may prevent the interlocking edges from aligning correctly.

Planning the layout before installation can reduce unnecessary cuts. Starting from a straight wall or a clearly marked centre line helps maintain consistent rows. Edge tiles may need to be trimmed around door frames, pillars, cabinets and other fixed objects.

The flooring can normally be assembled without permanent adhesive, although the final installation method should reflect the room dimensions, edge conditions and expected level of movement.

Moisture and Chemical Resistance in Working Areas

The recycled PVC material is described as waterproof, moisture resistant and chemical resistant. These characteristics make the tiles suitable for garages and workshops where occasional spills or damp footwear may affect the floor.

The interlocking joints should not be treated as a sealed waterproof membrane. Liquids may still reach the subfloor through tile joins or uncovered perimeter edges, particularly when spills are not removed quickly.

Chemical resistance can vary according to the substance, concentration and contact time. Unknown chemicals should be tested on a spare or concealed section, and spills should be cleaned according to appropriate safety guidance.

Using the Tiles in a Home Gym

The 12mm PVC tiles may also be used to create a defined home exercise area. Their modular format makes them useful beneath general fitness equipment, exercise benches and low-impact training zones.

PVC flooring is firmer than many specialist rubber gym mats. For areas where heavy free weights will be dropped repeatedly, a purpose-made weightlifting surface may provide more appropriate impact and vibration control.

Equipment should be positioned carefully, particularly where narrow feet or wheels create concentrated pressure. Protective pads may help distribute equipment weight and reduce localised marking.

Cleaning and Replacing Individual Tiles

Routine dust and loose debris can be removed with a vacuum, broom or soft brush. The surface may then be wiped or mopped using a mild cleaning solution suitable for PVC flooring.

Strong solvents or unsuitable chemical cleaners should be avoided unless compatibility has been confirmed. Excess liquid should also be removed rather than left to settle around the interlocking joints.

One advantage of modular flooring is that a damaged or heavily marked tile can be disconnected and replaced without removing the entire installation. Keeping spare matching tiles can be helpful where the floor will receive frequent workshop or garage use.

Frequently Asked Questions

Are these tiles suitable for a domestic garage?

Yes. They are designed for garage flooring and provide a modular surface over a suitable concrete or existing floor. The subfloor should be level, clean and structurally sound before installation.

Can a vehicle be parked on the tiles?

The product is listed for garage use, but the supplier has not provided a maximum vehicle weight or point-load rating. Vehicle type, tyre pressure and the condition of the subfloor should be considered before installation.

Do the tiles require adhesive?

The tiles use an interlocking installation system and are intended to connect without a complicated permanent fitting process. Adhesive requirements may vary where the floor has open edges, uneven areas or unusual movement.

Is the finished floor completely waterproof?

The PVC material is described as waterproof, but the interlocking joins do not create a sealed tanking system. Standing water and spills should be removed promptly to reduce the possibility of moisture reaching the subfloor.

Can damaged tiles be replaced separately?

Yes. The modular design allows individual tiles to be disconnected and replaced without lifting the complete floor, provided compatible replacement tiles are available.

Are these tiles suitable for a workshop?

Yes. Their textured, hard-wearing and chemical-resistant construction makes them relevant for general workshop flooring. Spills should still be cleaned quickly to maintain grip and surface condition.

Can the tiles be installed in a home gym?

They can be used in general home exercise areas and beneath suitable fitness equipment. A specialist impact-absorbing surface should be considered where heavy weights will be dropped regularly.

How should the floor be cleaned?

Vacuuming, sweeping and damp mopping with a mild PVC-compatible cleaner should be sufficient for routine maintenance. Strong solvents should only be used when material compatibility has been confirmed.

At Rubber Fit Floors, we are committed to delivering your orders efficiently and securely to your doorstep. Here’s everything you need to know about our shipping process:

1. Shipping Destinations
We currently ship to the United Kingdom, covering all regions including mainland UK, Northern Ireland, and the Scottish Highlands. If you’re located outside the UK, please get in touch with us to discuss custom shipping options.

2. Processing Time

An order confirmation email does not constitute acceptance of your order. Acceptance occurs only when the order has been dispatched. All orders are processed within 1–2 business days.
Orders placed on weekends or holidays will be processed on the next working day.

3. Delivery Time
Standard Delivery: 3–5 business days.
Express Delivery: 1–2 business days (available at an additional charge).
Delivery times are estimates only and not guaranteed. We are not liable for delays caused by couriers or external factors.

4. Shipping Charges
Standard Delivery: £7.99 (Free for orders over £100).
Express Delivery: £24.95.
For bulky or custom orders, shipping charges will be calculated based on the weight and dimensions of your package.

5. Tracking Your Order
Once your order is dispatched, you will receive an email with a tracking link to monitor your shipment. If you do not receive this information, please contact our support team.

6. Damaged or Lost Shipments
If your order arrives damaged or is delayed beyond the expected delivery time, kindly reach out to us immediately. We will assist you with replacements, refunds, or further inquiries.

7. Contact Us
For any shipping-related questions, feel free to contact our customer support:
📧 Email: procurement@rubberfitfloors.co.uk
📞 Phone: 07404270642
Address: 9 Fiveacre Close, Thornton Heath, CR7 6AS