• Solid oak

• 0.9m length

• Five size options

• Hardwood L-shaped corner bead

• Edge nosing for stairs, trims and interior joinery projects

Natural Oak Finishing for Exposed Corners

This solid oak cushion corner L bead provides a natural timber finish where two surfaces meet at an exposed right angle. Its L-shaped construction covers both sides of the corner, helping create a cleaner transition while protecting the underlying edge from everyday knocks, scuffs and contact.

The oak construction makes the profile particularly suitable for interiors where plastic or metal edging would not complement the surrounding timber. Natural grain, colour and markings will vary between pieces because solid wood does not have the completely uniform appearance of a printed or manufactured finish.

Choosing the Correct Profile Size

The profile is available in 20mm, 25mm, 30mm, 40mm and 45mm size options. A smaller option may suit compact corners and narrow trim work, while a wider profile provides more coverage across each side of the underlying edge.

The supplied information does not include a technical drawing showing whether the selected measurement applies equally to both sides of the L-shaped profile. Measure the top and front surfaces carefully and compare them with the selected option before ordering, especially where the bead must fit around a stair tread or existing timber feature.

Suitable Uses Around Stairs and Interior Woodwork

The cushion corner profile can be used as stair edge nosing, a corner angle bead or a finishing trim for selected joinery projects. It may be suitable for covering exposed timber edges, defining the front of a tread or creating a more complete appearance where two wooden surfaces meet.

The term “cushion corner” describes the profile style, but the exact radius and curvature of the outer edge are not stated in the available specifications. Where a precise rounded shape is required, the profile should be checked against the intended project before cutting or permanently fixing it.

Measuring and Cutting the 900mm Length

The 900mm length is suitable for many domestic stair widths and smaller interior finishing projects. It can be shortened where the installation requires a narrower piece, although each stair or corner should be measured separately because dimensions can vary across the same property.

A fine-tooth saw intended for hardwood will generally produce a cleaner result with less risk of tearing the oak fibres. The profile should be supported securely while cutting, and any roughness or sharp fibres at the cut end can be removed carefully with fine abrasive paper.

Fixing, Finishing and Maintaining the Oak

The supplied details do not confirm that adhesive, screws, pins or other installation materials are included. The fixing method should therefore be selected according to the underlying surface, the intended use and whether visible fixings are acceptable. Both sides of the corner must be clean, dry, stable and level before fitting.

No oil, stain, lacquer or varnish is specified. Any decorative or protective treatment should be tested on a concealed section or offcut first because oak can darken or change tone after finishing. Routine care should avoid excessive moisture and harsh abrasives that could affect the timber surface.

Frequently Asked Questions

Is this corner bead made from solid oak?

The product title and supplied specifications identify the profile as solid oak, with oak also stated as the wood species and timber type. As a natural hardwood product, each length may display slightly different grain patterns, markings and colour tones. These natural variations should be expected and can help the trim blend with other genuine timber features.

Which size should I choose for my project?

Choose a size that provides enough coverage across both sides of the corner without extending too far onto the surrounding surfaces. Measure the upper and front faces of the edge before ordering. Because the supplied information does not include a detailed cross-section drawing, avoid assuming that every listed measurement refers to a specific internal or external dimension.

Can this profile be used as stair nosing?

It is described as an edge nosing and may be used to finish selected stair tread corners where its dimensions and shape match the staircase. The underlying tread must be stable and level, and the profile should not reduce usable tread space or create an awkward raised edge. Confirm the selected size and fixing method before installation.

What does cushion corner mean?

Cushion corner generally refers to the outer shape or softened appearance of the edge rather than a completely sharp square corner. However, the exact radius and degree of rounding are not supplied in the product information. Where the precise shape is important, particularly for matching existing joinery, it should be checked before the material is cut.

Can the 0.9m oak bead be cut shorter?

Yes, solid oak profiles can generally be shortened using a fine-tooth saw suitable for hardwood. Measure and mark the required length carefully, then support the bead securely during cutting to reduce movement and splintering. The cut end can be sanded lightly to remove rough fibres and create a cleaner finish against the side of the installation.

Are screws or adhesive included?

The available product details do not state that screws, pins, adhesive or other installation materials are supplied. A suitable fixing method will need to be selected according to the substrate and application. The chosen fixing should secure both sides of the L profile without splitting the oak or leaving unsupported gaps underneath it.

Can the solid oak be stained or varnished?

The supplied information does not confirm whether the timber has already received a surface treatment. Inspect the profile before applying stain, oil, wax, lacquer or varnish, and test the chosen finish on a concealed area first. Oak can become noticeably darker or warmer after treatment, so testing helps confirm the final appearance.

At Rubber Fit Floors, we are committed to delivering your orders efficiently and securely to your doorstep. Here’s everything you need to know about our shipping process:

1. Shipping Destinations
We currently ship to the United Kingdom, covering all regions including mainland UK, Northern Ireland, and the Scottish Highlands. If you’re located outside the UK, please get in touch with us to discuss custom shipping options.

2. Processing Time

An order confirmation email does not constitute acceptance of your order. Acceptance occurs only when the order has been dispatched. All orders are processed within 1–2 business days.
Orders placed on weekends or holidays will be processed on the next working day.

3. Delivery Time
Standard Delivery: 3–5 business days.
Express Delivery: 1–2 business days (available at an additional charge).
Delivery times are estimates only and not guaranteed. We are not liable for delays caused by couriers or external factors.

4. Shipping Charges
Standard Delivery: £7.99 (Free for orders over £100).
Express Delivery: £24.95.
For bulky or custom orders, shipping charges will be calculated based on the weight and dimensions of your package.

5. Tracking Your Order
Once your order is dispatched, you will receive an email with a tracking link to monitor your shipment. If you do not receive this information, please contact our support team.

6. Damaged or Lost Shipments
If your order arrives damaged or is delayed beyond the expected delivery time, kindly reach out to us immediately. We will assist you with replacements, refunds, or further inquiries.

7. Contact Us
For any shipping-related questions, feel free to contact our customer support:
📧 Email: procurement@rubberfitfloors.co.uk
📞 Phone: 07404270642
Address: 9 Fiveacre Close, Thornton Heath, CR7 6AS