• Solid oak

• 0.9m length

• 20mm x 20mm profile

• L-shaped stair tread nosing

• Hardwood corner trim for neat exposed stair edges

Solid Oak Protection for Exposed Stair Edges

This solid oak stair nosing provides a practical way to finish the front edge of a timber stair tread. The hardwood profile covers the exposed corner, helping create a more complete transition between the horizontal tread and the vertical face of the step. Its natural timber construction makes it particularly suitable for staircases where a metal or plastic trim would look out of place.

How the L-Shaped Profile Fits the Tread

The right-angle design is formed to sit across two adjoining surfaces. One 20mm section rests over the top of the stair tread, while the second 20mm section covers the front edge. This L-shaped arrangement creates a defined corner and can help conceal minor imperfections where two timber surfaces meet, provided the underlying edge is straight and properly prepared.

Understanding the 20mm x 20mm Dimensions

Both sides of the profile measure 20mm, producing a compact corner trim rather than a wide stair covering. These dimensions should be compared with the available tread space and front drop before ordering. The profile is intended to finish a defined edge, but it may not provide enough coverage where the existing staircase has extensive damage, a thick floor covering or an unusually rounded front.

Cutting the 0.9m Oak Profile to Size

The 0.9m length is suitable for many standard domestic stair widths and can be shortened when a narrower section is required. Every tread should be measured individually because stair widths can vary slightly, even within the same staircase. A fine-tooth saw suitable for hardwood will normally produce a cleaner cut, while light sanding can be used to smooth the cut end before installation.

Preparing, Fitting and Finishing the Timber

The available product information does not specify an installation method or confirm whether fixings are included. The appropriate adhesive, pins or screws will therefore depend on the stair construction and the desired appearance. Both bonding surfaces should be dry, level and free from dust. As no coating is stated, any oil, stain, lacquer or protective finish should be tested on a small area first to confirm the preferred colour and appearance.

Frequently Asked Questions

Is this profile made from solid oak?

The supplied product details identify the material as wood, the wood species as oak and the timber classification as hardwood. It is therefore presented as a solid oak profile rather than an oak-effect or laminated trim. Natural variations in grain, shade and pattern should be expected because timber does not have the completely uniform appearance of manufactured plastic or metal edging.

What does a 20mm x 20mm L-nose measurement mean?

The measurement refers to the two sides forming the right-angle profile. One section extends approximately 20mm across the upper surface, while the other drops approximately 20mm down the front edge. These dimensions should be checked against the actual staircase because the trim must sit evenly across both surfaces without interfering with normal foot placement.

Can the 0.9m length be shortened?

Yes, solid oak can generally be cut to the required width using a fine-tooth saw intended for hardwood. The profile should be supported securely during cutting to reduce movement and minimise splintering. Measure the individual tread before making each cut, then smooth the exposed end carefully with fine abrasive paper to create a neat edge.

Are adhesive or fixing screws supplied?

The available specifications do not state that adhesive, screws, pins or any other installation materials are included. Suitable fixings will need to be selected according to the underlying stair material and the preferred finish. A timber staircase may accept pins or screws, while some installations may use a suitable construction adhesive to avoid visible fixings.

Can this oak nosing be stained or varnished?

The supplied information does not confirm whether the timber is unfinished or already treated. Before applying any stain, oil, varnish or lacquer, inspect the surface and test the chosen product on an offcut or concealed area. Oak can change colour noticeably when treated, so testing helps confirm the final shade and compatibility before the entire profile is finished.

Is this suitable for covering a badly damaged stair edge?

The 20mm x 20mm profile can cover a defined corner and may conceal small marks or minor irregularities. It should not be relied upon to repair loose, broken or structurally damaged timber. Any unstable area should be repaired and levelled first, as the stair nosing requires firm, even support across both sides to achieve a secure and visually consistent installation.

Can it be used for purposes other than stair treads?

Its right-angle shape may also suit selected interior woodworking applications where a solid oak corner bead is required. Compatibility will depend on the dimensions, surface condition and intended fixing method. The primary described use remains stair tread edging, so measurements and installation requirements should be assessed carefully before using it for another project.

At Rubber Fit Floors, we are committed to delivering your orders efficiently and securely to your doorstep. Here’s everything you need to know about our shipping process:

1. Shipping Destinations
We currently ship to the United Kingdom, covering all regions including mainland UK, Northern Ireland, and the Scottish Highlands. If you’re located outside the UK, please get in touch with us to discuss custom shipping options.

2. Processing Time

An order confirmation email does not constitute acceptance of your order. Acceptance occurs only when the order has been dispatched. All orders are processed within 1–2 business days.
Orders placed on weekends or holidays will be processed on the next working day.

3. Delivery Time
Standard Delivery: 3–5 business days.
Express Delivery: 1–2 business days (available at an additional charge).
Delivery times are estimates only and not guaranteed. We are not liable for delays caused by couriers or external factors.

4. Shipping Charges
Standard Delivery: £7.99 (Free for orders over £100).
Express Delivery: £24.95.
For bulky or custom orders, shipping charges will be calculated based on the weight and dimensions of your package.

5. Tracking Your Order
Once your order is dispatched, you will receive an email with a tracking link to monitor your shipment. If you do not receive this information, please contact our support team.

6. Damaged or Lost Shipments
If your order arrives damaged or is delayed beyond the expected delivery time, kindly reach out to us immediately. We will assist you with replacements, refunds, or further inquiries.

7. Contact Us
For any shipping-related questions, feel free to contact our customer support:
📧 Email: procurement@rubberfitfloors.co.uk
📞 Phone: 07404270642
Address: 9 Fiveacre Close, Thornton Heath, CR7 6AS