• Solid oak

• 0.9m length

• Planed timber finish

• 25mm x 25mm L-shaped profile

• Hardwood stair nosing for neat tread and corner finishing

Planed Solid Oak Finish for Exposed Stair Edges

This solid oak stair nosing provides a natural timber finish for the exposed front edge of a stair tread. The L-shaped profile covers the upper corner and front face, creating a more complete transition between the horizontal tread and the vertical section of the step.

The oak is described as planed, giving the visible surfaces a smoother and more consistent finish than rough-sawn timber. Natural differences in grain, tone and pattern should still be expected because each piece of solid wood has its own appearance.

How the 25mm x 25mm L-Nose Profile Fits

The profile has two 25mm sections positioned at a right angle. One side sits across the upper surface of the tread, while the second section covers the front edge. This design can help conceal the joint between two surfaces and provide a defined border around the step.

Both dimensions should be checked against the existing staircase before ordering. The profile must sit evenly across the corner without rocking, leaving unsupported gaps or creating an uncomfortable obstruction near the front of the tread.

Cutting the 0.9m Length for Individual Steps

The 0.9m length is suitable for many domestic stair widths and can be shortened where a narrower section is required. Each tread should be measured separately because small width differences are common across the same staircase.

A fine-tooth saw suitable for hardwood will usually provide a cleaner cut with less risk of splintering. The profile should be supported securely while cutting, and the exposed end can be lightly sanded to remove rough fibres and achieve a neater side finish.

Selecting a Suitable Installation Method

The supplied information does not confirm whether adhesive, screws, pins or other fixings are included. The most appropriate installation method will depend on the stair material, the condition of the tread and whether visible fixings are acceptable.

Both sides of the stair corner should be firm, dry, clean and level before installation. Loose timber, damaged flooring or uneven edges should be repaired first because the oak profile needs consistent support across its full length to remain secure.

Finishing and Maintaining Natural Oak

No stain, oil, varnish or other surface coating is specified in the product details. The timber should therefore be inspected before applying a decorative or protective finish. Testing the chosen treatment on a small concealed area or offcut will help confirm how it changes the colour and grain.

Routine care should use methods suitable for interior oak. Excess water should be avoided, and harsh abrasive products may mark the planed surface. Periodic inspection is also recommended to identify movement, loosened fixings or damage around the tread edge.

Frequently Asked Questions

Is this stair nosing made from solid oak?

The product title and supplied specifications identify the profile as solid oak, with oak also listed as the wood species and timber type. As a natural hardwood product, variations in grain direction, shade and visible markings are normal. These differences are part of the timber rather than defects associated with a printed or artificial wood-effect finish.

What does the 25mm x 25mm measurement represent?

The measurement refers to the two sides that form the right-angle profile. One section extends approximately 25mm across the top of the stair tread, while the second section covers approximately 25mm of the front face. Both areas should be measured before purchase to ensure the trim provides enough coverage and sits flat against the stair edge.

Can the 0.9m oak profile be shortened?

Yes, solid oak can generally be cut to match the width of an individual tread. A fine-tooth saw designed for hardwood can help reduce rough edges and splintering. Each stair should be measured separately before cutting, and the profile should be supported firmly so the cut remains straight and the finished section fits neatly between the staircase sides.

Are installation fixings included with the nosing?

The available product information does not state that screws, pins, adhesive or other fixing materials are supplied. A suitable method will need to be selected for the underlying staircase. The chosen fixing should hold both sides of the L-shaped profile securely without splitting the oak or leaving unsupported areas beneath the trim.

Can the oak nosing be stained, oiled or varnished?

The specifications do not confirm whether the oak has already received a protective coating. Inspect the surface before applying any treatment and test the chosen product on a concealed area where possible. Oils and stains can deepen the natural oak colour, while varnish may alter the sheen, so testing helps confirm the final appearance before full application.

Is this profile suitable for repairing a damaged stair edge?

The nosing can cover a defined corner and may hide small surface marks or minor imperfections. It should not be used as the only repair for loose, cracked or structurally damaged timber. The underlying tread and front face must first be made stable and level so the profile has adequate support and can be fixed securely across both surfaces.

Can this L-shaped oak trim be used for other woodworking projects?

The 25mm x 25mm right-angle profile may suit selected interior joinery and corner-finishing applications where a solid oak bead is required. Suitability will depend on the required coverage, fixing method and surrounding materials. The main intended purpose remains stair tread edging, so alternative uses should be assessed individually before cutting or finishing the timber.

At Rubber Fit Floors, we are committed to delivering your orders efficiently and securely to your doorstep. Here’s everything you need to know about our shipping process:

1. Shipping Destinations
We currently ship to the United Kingdom, covering all regions including mainland UK, Northern Ireland, and the Scottish Highlands. If you’re located outside the UK, please get in touch with us to discuss custom shipping options.

2. Processing Time

An order confirmation email does not constitute acceptance of your order. Acceptance occurs only when the order has been dispatched. All orders are processed within 1–2 business days.
Orders placed on weekends or holidays will be processed on the next working day.

3. Delivery Time
Standard Delivery: 3–5 business days.
Express Delivery: 1–2 business days (available at an additional charge).
Delivery times are estimates only and not guaranteed. We are not liable for delays caused by couriers or external factors.

4. Shipping Charges
Standard Delivery: £7.99 (Free for orders over £100).
Express Delivery: £24.95.
For bulky or custom orders, shipping charges will be calculated based on the weight and dimensions of your package.

5. Tracking Your Order
Once your order is dispatched, you will receive an email with a tracking link to monitor your shipment. If you do not receive this information, please contact our support team.

6. Damaged or Lost Shipments
If your order arrives damaged or is delayed beyond the expected delivery time, kindly reach out to us immediately. We will assist you with replacements, refunds, or further inquiries.

7. Contact Us
For any shipping-related questions, feel free to contact our customer support:
📧 Email: procurement@rubberfitfloors.co.uk
📞 Phone: 07404270642
Address: 9 Fiveacre Close, Thornton Heath, CR7 6AS