• Solid oak

• 0.9m length

• 30mm x 30mm profile

• L-shaped hardwood stair trim

• Wide corner nosing for neat tread edge finishing

Wider Coverage for Exposed Stair Corners

This solid oak stair nosing is designed to finish the exposed front corner of a timber stair tread. Its L-shaped construction covers both the upper tread surface and the vertical front edge, creating a cleaner transition where the two sections meet.

The 30mm profile provides more coverage than narrower 20mm or 25mm trims. This can make it useful where a broader section is required to conceal the underlying joint, protect the edge or create a more noticeable timber border around the step.

Understanding the 30mm x 30mm Profile

The profile consists of two sections positioned at a right angle, with each side measuring approximately 30mm. One section sits across the top of the tread, while the second section extends down the front face of the stair.

Both surfaces should be measured before ordering. The profile needs firm and even support across its full width, and it should not create an excessive raised area or reduce the usable depth of the stair tread.

Natural Hardwood Appearance and Variation

Oak is a hardwood valued for its visible grain and natural character. Individual profiles may show differences in shade, grain direction and small natural markings, so the appearance may not be completely uniform along the full length or between separate pieces.

These natural variations can help the nosing blend with genuine timber stairs and other interior woodwork. Where a close match is required, the profile should be compared with the surrounding timber before any permanent surface treatment is applied.

Measuring and Cutting the 0.9m Length

The 0.9m profile is suitable for many domestic stair widths and can be shortened when a narrower section is needed. Every step should be measured separately because tread widths may vary slightly across the same staircase.

A fine-tooth saw intended for hardwood can help produce a cleaner cut with less risk of splintering. The profile should be supported securely while cutting, and the exposed end can be sanded lightly to remove rough fibres and improve the finished appearance.

Installation and Surface Finishing

The supplied product details do not confirm whether adhesive, screws, pins or other installation materials are included. The fixing method should therefore be selected according to the construction of the staircase and whether visible fixings are acceptable.

The stair edge should be dry, stable, clean and level before fitting. No oil, stain, lacquer or varnish is specified, so any intended treatment should first be tested on an offcut or concealed area to confirm the resulting colour and finish.

Frequently Asked Questions

Is this stair nosing made from solid oak?

The product title identifies the profile as solid oak, while the supplied specifications list oak as both the wood species and timber type. As a natural hardwood product, it may display differences in grain, tone and markings. These variations are expected and help distinguish genuine timber from a printed wood-effect trim.

What does the 30mm x 30mm measurement mean?

The measurement refers to the two sides forming the right-angle profile. One side extends approximately 30mm across the upper tread surface, while the other covers approximately 30mm of the front face. Both areas should be measured carefully to confirm that the profile provides suitable coverage without obstructing normal stair use.

How does this differ from a smaller L-nose profile?

A 30mm x 30mm stair nosing covers a wider area on both sides of the corner than narrower alternatives. This may make it more suitable where additional coverage is required around the edge. The wider profile also needs more clear space, so it may not be appropriate where the tread surface or front drop is limited.

Can the 0.9m profile be cut shorter?

Yes, oak profiles can generally be shortened using a fine-tooth saw suitable for hardwood. The stair should be measured before each cut because individual tread widths can differ. Supporting the profile firmly during cutting helps reduce movement, while light sanding can remove rough fibres from the exposed end.

Are adhesive or screws supplied?

The available information does not state that adhesive, screws, pins or other fixing materials are included. The most suitable method will depend on the underlying stair material and the intended appearance. Any fixing should hold both sides of the L-shaped profile securely without splitting the oak or leaving gaps beneath it.

Can the oak nosing be stained or varnished?

No surface treatment is confirmed in the supplied specifications. Before applying stain, oil, wax, varnish or lacquer, inspect the timber and test the selected finish on a concealed area where possible. Oak can change noticeably in colour after treatment, so testing helps confirm whether it will match the surrounding staircase.

Can this profile cover a damaged stair edge?

The 30mm x 30mm profile may conceal minor marks, uneven joints or small cosmetic imperfections. It should not be used as a substitute for repairing loose, cracked or structurally damaged timber. The underlying tread and front face must be stable and level so the nosing has firm support after installation.

At Rubber Fit Floors, we are committed to delivering your orders efficiently and securely to your doorstep. Here’s everything you need to know about our shipping process:

1. Shipping Destinations
We currently ship to the United Kingdom, covering all regions including mainland UK, Northern Ireland, and the Scottish Highlands. If you’re located outside the UK, please get in touch with us to discuss custom shipping options.

2. Processing Time

An order confirmation email does not constitute acceptance of your order. Acceptance occurs only when the order has been dispatched. All orders are processed within 1–2 business days.
Orders placed on weekends or holidays will be processed on the next working day.

3. Delivery Time
Standard Delivery: 3–5 business days.
Express Delivery: 1–2 business days (available at an additional charge).
Delivery times are estimates only and not guaranteed. We are not liable for delays caused by couriers or external factors.

4. Shipping Charges
Standard Delivery: £7.99 (Free for orders over £100).
Express Delivery: £24.95.
For bulky or custom orders, shipping charges will be calculated based on the weight and dimensions of your package.

5. Tracking Your Order
Once your order is dispatched, you will receive an email with a tracking link to monitor your shipment. If you do not receive this information, please contact our support team.

6. Damaged or Lost Shipments
If your order arrives damaged or is delayed beyond the expected delivery time, kindly reach out to us immediately. We will assist you with replacements, refunds, or further inquiries.

7. Contact Us
For any shipping-related questions, feel free to contact our customer support:
📧 Email: procurement@rubberfitfloors.co.uk
📞 Phone: 07404270642
Address: 9 Fiveacre Close, Thornton Heath, CR7 6AS