• 9mm Depth

• 0.9m Length

• Modern Colour Options

• Peel-and-Stick Fitting

• Designed for Wood and Carpet Stair Edges

A Discreet Finish for Indoor Stair Edges

This self-adhesive stair nosing trim is designed to create a cleaner finish along the exposed edge of an indoor step. It covers the transition between the horizontal tread and the front face, helping make unfinished or worn stair edges appear more consistent without requiring a prominent metal profile.

The modern colour options allow the edging to be coordinated with different staircase finishes and interior schemes. The available colours depend on the selected product variation, so the chosen finish should be checked carefully before ordering.

Understanding the 0.9m Length and 9mm Depth

The trim is supplied in a 3ft length, which is approximately 0.9 metres. This length may suit many standard residential stair widths, although every step should be measured because staircase dimensions can differ between properties and even between individual treads.

The listed depth is approximately 9mm. The supplier details do not confirm the full profile width, material thickness, or vertical coverage, so these measurements should be checked where available before installation. This is especially important when the trim must meet an existing carpet, wooden tread, or adjoining floor covering.

Peel-and-Stick Installation Without Visible Screws

The self-adhesive installation method is designed for straightforward application. The backing can be peeled away before the trim is positioned along the stair edge, removing the need for visible screw heads or drilled fixing holes under suitable installation conditions.

Adhesive performance depends heavily on preparation. The application area should be clean, dry, smooth, and free from dust, grease, wax, polish, or loose material. The exact adhesive type, curing time, and bond-strength rating are not provided, so the trim should be pressed firmly into place and checked before the staircase returns to regular use.

Compatibility with Wood and Carpeted Steps

The product is promoted for use with wood and carpet stair finishes. On wooden steps, the surface should be sealed, stable, and sufficiently smooth for the adhesive to make consistent contact. Damaged coatings, dust, or uneven edges may reduce the effectiveness of the bond.

Carpet compatibility may depend on the carpet thickness, pile, edge construction, and the amount of solid surface available beneath the trim. Adhesive products do not bond equally well to every textile surface, so suitability should be confirmed before fitting across a complete staircase. The product is listed for domestic use rather than non-domestic applications.

Care, Inspection and Long-Term Positioning

Routine cleaning can help keep the stair edge looking neat and prevent debris from collecting around the trim. A soft brush, vacuum attachment, or lightly damp cloth may be suitable, depending on the confirmed surface material. Cleaning products that leave an oily or slippery residue should be avoided around steps.

The edging should be inspected periodically for lifting, curling, or movement, particularly at the ends and front corners. Any loose section should be addressed promptly. No commercial traffic classification, adhesive durability test, or independent slip-resistance rating is included in the supplied product information.

Frequently Asked Questions

Does this stair edging require screws?

No screws are listed as part of the intended installation method. The trim uses a self-adhesive backing that is peeled away before the profile is positioned along the stair edge. The surface must be clean, dry, smooth, and stable because dust, grease, loose finishes, or uneven areas may prevent the adhesive from forming a consistent bond.

Can the trim be installed on wooden stairs?

The product is promoted for wood stair edges, but compatibility can depend on the condition and finish of the timber. Sealed, clean, and level wooden surfaces are more likely to provide reliable adhesive contact than dusty, damaged, waxed, or highly textured finishes. A small area should be checked before fitting the trim across every step.

Is this edging suitable for carpeted steps?

Carpet is included in the listed applications, although results may vary according to the carpet pile, thickness, edge construction, and available bonding surface. Adhesive may not hold equally well on loose, deep, or heavily textured carpet. Confirm that enough firm and stable surface is available before applying the strip to the complete staircase.

Will the 0.9m length fit a standard step?

The 3ft length, approximately 0.9 metres, may suit many domestic stair treads, but there is no universal stair width. Each step should be measured individually before ordering, particularly on older or custom-built staircases. The supplied information does not confirm a cutting service or provide instructions for shortening the profile.

What does the approximate 9mm depth refer to?

The listing provides an approximate depth of 9mm but does not include a detailed profile diagram explaining every measurement. Buyers should not assume this represents the total tread coverage, vertical drop, or material thickness. Confirm the complete profile dimensions where possible, especially when matching the trim to an existing floor covering.

How should the adhesive stair trim be maintained?

Keep the profile clear of dust and debris using a soft brush, vacuum, or suitable lightly damp cloth. Avoid soaking the adhesive area or using cleaning products that leave a slippery residue. The strip should also be checked regularly for lifted ends, curled corners, or movement so any weakening of the adhesive bond can be addressed promptly.

At Rubber Fit Floors, we are committed to delivering your orders efficiently and securely to your doorstep. Here’s everything you need to know about our shipping process:

1. Shipping Destinations
We currently ship to the United Kingdom, covering all regions including mainland UK, Northern Ireland, and the Scottish Highlands. If you’re located outside the UK, please get in touch with us to discuss custom shipping options.

2. Processing Time

An order confirmation email does not constitute acceptance of your order. Acceptance occurs only when the order has been dispatched. All orders are processed within 1–2 business days.
Orders placed on weekends or holidays will be processed on the next working day.

3. Delivery Time
Standard Delivery: 3–5 business days.
Express Delivery: 1–2 business days (available at an additional charge).
Delivery times are estimates only and not guaranteed. We are not liable for delays caused by couriers or external factors.

4. Shipping Charges
Standard Delivery: £7.99 (Free for orders over £100).
Express Delivery: £24.95.
For bulky or custom orders, shipping charges will be calculated based on the weight and dimensions of your package.

5. Tracking Your Order
Once your order is dispatched, you will receive an email with a tracking link to monitor your shipment. If you do not receive this information, please contact our support team.

6. Damaged or Lost Shipments
If your order arrives damaged or is delayed beyond the expected delivery time, kindly reach out to us immediately. We will assist you with replacements, refunds, or further inquiries.

7. Contact Us
For any shipping-related questions, feel free to contact our customer support:
📧 Email: procurement@rubberfitfloors.co.uk
📞 Phone: 07404270642
Address: 9 Fiveacre Close, Thornton Heath, CR7 6AS