A Simple Way to Finish Existing Stair Edges

This 15mm stair nosing provides a straightforward finishing option for stairs and steps where a compact edge profile is required. Measuring 3ft, or approximately 0.9 metres, in length, it can be compared directly with the width of the intended step before installation.

The profile is designed as a self-adhesive, stick-down stair nosing. This makes it particularly useful where a cleaner installation method is preferred without automatically relying on visible screws or other mechanical fixings.

Before fitting, the staircase should be measured carefully so the 15mm depth and 0.9m length can be checked against the actual edge.

Why the 15mm Depth Matters

The approximate 15mm depth is one of the most important measurements to consider when assessing compatibility. Stair nosing should sit appropriately against the existing edge rather than being selected on overall length alone.

A relatively compact profile can be useful where the aim is to add a finishing edge without introducing an unnecessarily deep section around the stair nose. The exact suitability will depend on the construction and dimensions of the existing step.

Measure the fitting area before ordering, particularly if several stairs are being covered. Even within the same staircase, individual tread widths can sometimes vary slightly.

Self-Adhesive Fitting for Prepared Surfaces

The stick-down installation method allows the nosing to be applied directly to a suitable stair or step surface. Proper preparation is important because adhesive performance depends heavily on the condition of the surface beneath the profile.

The fitting area should be clean, dry and free from dust, grease or loose material. Positioning the nosing before removing the adhesive backing can also help confirm alignment and coverage before permanent contact is made.

Once correctly positioned, even pressure should be applied along the profile so the adhesive has consistent contact with the intended surface.

Suitable for Stairs and Steps

The supplied product information specifies suitability for stairs and steps, making this profile a practical option for applications where the leading edge requires a more finished appearance.

Stair edges experience repeated contact during normal use, so a fitted nosing can provide an additional layer around this exposed part of the step. It can also create a cleaner transition between the tread surface and the front edge.

Compatibility should still be checked according to the existing stair material and surface condition. A self-adhesive profile should not be fitted over loose, damaged or contaminated areas without addressing the underlying issue first.

Maintaining the Stick-Down Stair Trim

Routine cleaning helps prevent dirt and debris from building up around the stair edge. A soft cloth, brush or other suitable non-abrasive cleaning method can be used according to the material and finish of the actual profile.

The adhesive connection should also be checked periodically, especially on stairs receiving frequent foot traffic. Any lifting or movement should be addressed rather than allowing the profile to remain partially detached.

Keeping the surrounding stair surface clean and dry can also help maintain a tidy installation and reduce unnecessary stress around the fitted edge.

Frequently Asked Questions

What is the length of this stair nosing?

The stair nosing measures approximately 3ft, which is equivalent to 0.9 metres. Measure the width of the intended stair before installation so you can confirm whether the supplied length is suitable or requires adjustment.

What is the depth of the stair nosing?

The stated depth is approximately 15mm. This measurement should be checked against the existing stair edge because profile compatibility depends on how the nosing sits around the intended fitting area.

Is this stair nosing self-adhesive?

Yes. The product is described as self-adhesive and stick-down, allowing it to be fitted to a suitable prepared surface without assuming that additional screw fixings are required.

What surfaces can it be used on?

The supplied information confirms suitability for stairs and steps but does not specify individual surface materials. Check the actual staircase surface and adhesive compatibility before fitting the profile permanently.

Does the surface need preparation before fitting?

Yes. The intended area should be clean, dry and free from grease, dust and loose debris. Proper preparation gives the adhesive a better opportunity to make consistent contact with the stair surface.

Should I measure every stair separately?

Yes. Measuring each step can be useful because widths may vary slightly, particularly on older staircases. Accurate measurements also help determine whether cutting or adjustment will be required.

Can the 0.9m profile be cut shorter?

The supplied information does not provide specific cutting instructions. If shortening is required, inspect the actual profile first and use an appropriate method for its construction rather than assuming how it should be cut.

Is this suitable for both stairs and individual steps?

Yes. The supplied specifications list stairs and steps as the intended applications. Final suitability still depends on the dimensions, condition and surface of the area where the nosing will be installed.

How should the stair nosing be maintained?

Keep the profile and surrounding edge free from dust and debris using suitable non-abrasive cleaning methods. Periodically check that the adhesive remains secure and address any lifting or movement promptly.

Is the product supplied new?

Yes. The stated condition is new, meaning the item is unused and undamaged. Packaging may differ depending on how the product is supplied, including the possibility of plain non-retail packaging.

At Rubber Fit Floors, we are committed to delivering your orders efficiently and securely to your doorstep. Here’s everything you need to know about our shipping process:

1. Shipping Destinations
We currently ship to the United Kingdom, covering all regions including mainland UK, Northern Ireland, and the Scottish Highlands. If you’re located outside the UK, please get in touch with us to discuss custom shipping options.

2. Processing Time

An order confirmation email does not constitute acceptance of your order. Acceptance occurs only when the order has been dispatched. All orders are processed within 1–2 business days.
Orders placed on weekends or holidays will be processed on the next working day.

3. Delivery Time
Standard Delivery: 3–5 business days.
Express Delivery: 1–2 business days (available at an additional charge).
Delivery times are estimates only and not guaranteed. We are not liable for delays caused by couriers or external factors.

4. Shipping Charges
Standard Delivery: £7.99 (Free for orders over £100).
Express Delivery: £24.95.
For bulky or custom orders, shipping charges will be calculated based on the weight and dimensions of your package.

5. Tracking Your Order
Once your order is dispatched, you will receive an email with a tracking link to monitor your shipment. If you do not receive this information, please contact our support team.

6. Damaged or Lost Shipments
If your order arrives damaged or is delayed beyond the expected delivery time, kindly reach out to us immediately. We will assist you with replacements, refunds, or further inquiries.

7. Contact Us
For any shipping-related questions, feel free to contact our customer support:
📧 Email: procurement@rubberfitfloors.co.uk
📞 Phone: 07404270642
Address: 9 Fiveacre Close, Thornton Heath, CR7 6AS