A Curved Aluminium Edge for LVT Stairs

Give LVT-covered stairs a clean and practical finishing detail with this curved aluminium bullnose stair nosing. Designed around a 35 x 3mm profile, it provides a structured edge for stair projects where the front of each step needs a neat, consistent finish.

The curved bullnose shape creates a rounded transition across the exposed stair edge, making it particularly suitable where a softer profile is preferred over a sharp square-edged trim. Its aluminium construction also provides a firm profile that can be incorporated into suitable LVT stair installations.

With a 2.7m length, the profile offers useful coverage for larger stair projects and can be measured and cut to suit individual step sections. Accurate planning before installation helps reduce unnecessary joints and material waste.

Aluminium AA 6063 T6 with Bronze Finish

Made from Aluminium AA 6063 T6, this stair nosing combines a rigid metal profile with a warm bronze appearance. The bronze finish offers an alternative to conventional silver aluminium, making it suitable for stair designs where the edge detail needs to complement wood-effect, neutral or darker LVT finishes.

The metal construction gives the profile a defined shape along the stair edge, while the curved bullnose design provides a visually smoother transition from the tread to the front edge of the step.

For the best result, the colour and profile dimensions should be considered alongside the chosen LVT, stair substrate and surrounding interior finishes.

Planning the Fit Before Installation

Before fitting the stair nosing, measure each stair section carefully rather than assuming every tread is identical. Stair dimensions can vary, particularly on older or individually constructed staircases.

The 35 x 3mm profile size should be checked against the thickness and installation arrangement of the LVT being used. The available stair build-up and substrate should also provide enough space for the selected profile to sit correctly without creating an unwanted transition.

Because the supplied specifications do not state a particular fixing system, the appropriate installation method should be selected according to the stair construction and LVT installation requirements. Cutting should be completed accurately so the profile follows the full width of the intended stair section.

Making Better Use of the 2.7m Length

The long 2.7m aluminium profile is useful when working across multiple stair sections. Depending on the width of your steps, a single length may provide enough material for several individual pieces after careful measurement and cutting.

Planning the cutting pattern before starting can help make better use of the profile. Measure the required lengths, mark each cut clearly and check the orientation of the bullnose before making permanent adjustments.

For larger installations, it is worth checking the number of steps, individual tread widths and any areas where additional joins may be required. This helps ensure that enough material is available to complete the project consistently.

A Bronze Detail for Finished Stair Edges

This curved aluminium stair nosing is suited to LVT stair projects where a bronze-coloured bullnose edge profile is preferred. Its combination of a 35 x 3mm profile, curved front edge and 2.7m length provides a practical option for both individual stair improvements and larger installation projects.

The finished appearance will depend on accurate measurement, suitable preparation and correct installation alongside the selected LVT. Before purchasing, confirm the profile dimensions, stair measurements and compatibility with your specific LVT system.

Frequently Asked Questions

Is this stair nosing suitable for LVT?

Yes. The profile is intended for LVT stair installations and provides a neat aluminium edge around the step. Check that the 35 x 3mm profile suits your specific LVT thickness and stair detail before installation.

What size is the stair nosing?

The stated profile size is 35 x 3mm. The listing also identifies it as a 2.7m product, making it suitable for covering longer stair sections with fewer joins.

What material is it made from?

It is made from Aluminium AA 6063 T6, a commonly used aluminium grade for formed profiles. This gives the nosing a rigid metal construction for practical stair-edge finishing.

What colour is the profile?

The profile is supplied in a bronze finish. This can provide a warmer alternative to standard silver or black aluminium and can complement wood-effect or neutral LVT designs.

Is the profile curved?

Yes. The product is described as a curved bullnose stair nosing, giving the exposed front edge of the step a rounded profile rather than a sharp square finish.

How is this stair nosing installed?

The supplied information identifies the product as a stair nosing but does not specify a fixing method. Installation should therefore follow the requirements of your stair build-up, substrate and LVT system.

Can one 2.7m length cover several steps?

Potentially, yes. A 2.7m length can be cut to suit individual stair sections, depending on the width of each step. Measure every tread carefully and allow for accurate cuts before installation.

Is it suitable for indoor stairs?

Yes, it is appropriate for interior LVT stair projects where an aluminium bullnose edge is required. Always confirm the profile dimensions and installation method against the existing stair construction.

Does it come with a warranty?

The listing states a 30-day manufacturer warranty. Keep your order details and inspect the profile on arrival so any issue can be raised within the stated warranty period.

What should I check before buying?

Confirm the 35 x 3mm profile, bronze colour, 2.7m length and compatibility with your LVT thickness. Also check the fixing method, stair measurements and clearance.

At Rubber Fit Floors, we are committed to delivering your orders efficiently and securely to your doorstep. Here’s everything you need to know about our shipping process:

1. Shipping Destinations
We currently ship to the United Kingdom, covering all regions including mainland UK, Northern Ireland, and the Scottish Highlands. If you’re located outside the UK, please get in touch with us to discuss custom shipping options.

2. Processing Time

An order confirmation email does not constitute acceptance of your order. Acceptance occurs only when the order has been dispatched. All orders are processed within 1–2 business days.
Orders placed on weekends or holidays will be processed on the next working day.

3. Delivery Time
Standard Delivery: 3–5 business days.
Express Delivery: 1–2 business days (available at an additional charge).
Delivery times are estimates only and not guaranteed. We are not liable for delays caused by couriers or external factors.

4. Shipping Charges
Standard Delivery: £7.99 (Free for orders over £100).
Express Delivery: £24.95.
For bulky or custom orders, shipping charges will be calculated based on the weight and dimensions of your package.

5. Tracking Your Order
Once your order is dispatched, you will receive an email with a tracking link to monitor your shipment. If you do not receive this information, please contact our support team.

6. Damaged or Lost Shipments
If your order arrives damaged or is delayed beyond the expected delivery time, kindly reach out to us immediately. We will assist you with replacements, refunds, or further inquiries.

7. Contact Us
For any shipping-related questions, feel free to contact our customer support:
📧 Email: procurement@rubberfitfloors.co.uk
📞 Phone: 07404270642
Address: 9 Fiveacre Close, Thornton Heath, CR7 6AS