A Compact Aluminium Ramp for Floor Transitions

This 900mm aluminium transition ramp is designed to create a cleaner junction where adjoining flooring areas meet at a change in level. Its 41mm width and 16mm height give the profile a compact shape that can help cover exposed floor edges without introducing an unnecessarily wide transition bar.

The aluminium construction provides a firm profile across the transition, while the anodised finish gives the surface a neat metallic appearance suitable for modern interior flooring. Its 900mm length also makes the trim practical for individual doorways and other relatively narrow floor transition areas.

Because transition dimensions need to match the actual flooring arrangement, the 41mm width and 16mm height should be checked carefully against the intended installation area before fitting.

Why the 16mm Ramp Height Matters

The height of a flooring transition profile determines whether it can create a practical connection between two adjoining levels. At 16mm high, this ramp is intended for transitions where one flooring surface sits noticeably above the other.

Using a profile that is too high or too low can leave the transition unsupported or create an awkward edge. Measuring the difference between both floor surfaces before installation therefore matters just as much as checking the overall length.

The 41mm width provides space for the profile to form a gradual ramp across the level change while remaining relatively slim. This can be useful around doorways and other areas where a broad transition strip would look excessive.

Self-Adhesive Installation Without Visible Screws

The trim uses a self-adhesive installation method, helping create a cleaner finished appearance without visible screw heads. This can also simplify fitting where drilling into the floor surface is undesirable.

Adhesive performance depends heavily on preparation. The intended installation area should be clean, dry, firm and reasonably smooth, with dust, grease, moisture and loose debris removed before the backing is applied.

The profile should first be positioned and checked for alignment before it is permanently pressed into place. Once correctly located, consistent pressure along the length helps establish more even contact with the underlying floor surface.

Anodised Aluminium for Modern Interior Floors

The aluminium profile features an anodised coating that gives the trim a clean, finished appearance. This makes it particularly suitable for visible flooring transitions where both function and presentation matter.

The neutral metallic surface can work alongside a variety of flooring finishes without becoming overly decorative. It is suitable for interior spaces including living rooms, kitchens, bedrooms, bathrooms and other rooms where a defined transition is required.

The aluminium construction is rigid compared with flexible rubber trims, so the supporting floor area beneath the profile should be reasonably even. Proper alignment helps the ramp sit consistently along its full 900mm length.

Measuring, Cleaning and Long-Term Care

Before installation, measure the doorway or floor opening carefully and compare it with the supplied 900mm length. If the opening is narrower, aluminium profiles can generally be shortened using suitable cutting equipment, although careful measuring is essential before any cut is made.

Once installed, routine cleaning should be straightforward. Dust and loose debris can be removed with a soft cloth, while mild non-abrasive cleaning can be used for surface marks.

Avoid coarse pads or aggressive cleaning tools that may scratch the anodised finish. It is also useful to inspect the transition occasionally for lifting around the adhesive edges, particularly in areas receiving frequent foot traffic.

Frequently Asked Questions

Is this transition ramp self-adhesive?

Yes. The profile uses a self-adhesive installation method, so visible screws are not normally required. For better adhesion, fit it to a clean, dry, stable surface free from dust, grease and loose material.

What are the exact dimensions of the profile?

The transition ramp measures 900mm long, 41mm wide and 16mm high. Check these dimensions against the doorway, floor edge or level change before installation to confirm suitable coverage.

What material is the floor trim made from?

The profile is manufactured from aluminium and has an anodised coating. This provides a firm transition strip with a clean metallic finish suitable for a range of indoor flooring areas.

Where can this transition ramp be installed?

It is listed for living rooms, kitchens, bedrooms, bathrooms and other indoor rooms. Actual suitability depends on the flooring surfaces, level difference and condition of the installation area.

Does the 16mm height suit every floor transition?

No. The 16mm height will not suit every application. Measure the difference between adjoining floor surfaces first, as an incorrect height may leave the transition uneven or poorly supported.

Can the 900mm aluminium profile be shortened?

Yes. Aluminium profiles can generally be cut to suit narrower doorways or openings. Measure carefully before cutting and finish the edge neatly so the installed transition maintains a clean appearance.

How should the surface be prepared before fitting?

The floor should be firm, smooth, clean and dry. Remove dust, grease, moisture and loose debris before applying the profile because contamination can reduce the quality of adhesive contact.

Is this profile suitable for bathroom use?

Bathroom use is included in the supplied room suitability. The fitting surface should still be dry during installation, and the adhesive area should not be treated as waterproof unless separately confirmed.

What does the anodised coating add?

The anodised finish gives the aluminium a cleaner, more refined surface and creates a modern appearance. It is useful in visible transition areas where both function and finish matter.

How should the transition ramp be cleaned?

Use a soft cloth and a mild, non-abrasive cleaning method to remove dust and marks. Avoid coarse pads or aggressive tools that could scratch the anodised surface or affect its appearance.

At Rubber Fit Floors, we are committed to delivering your orders efficiently and securely to your doorstep. Here’s everything you need to know about our shipping process:

1. Shipping Destinations
We currently ship to the United Kingdom, covering all regions including mainland UK, Northern Ireland, and the Scottish Highlands. If you’re located outside the UK, please get in touch with us to discuss custom shipping options.

2. Processing Time

An order confirmation email does not constitute acceptance of your order. Acceptance occurs only when the order has been dispatched. All orders are processed within 1–2 business days.
Orders placed on weekends or holidays will be processed on the next working day.

3. Delivery Time
Standard Delivery: 3–5 business days.
Express Delivery: 1–2 business days (available at an additional charge).
Delivery times are estimates only and not guaranteed. We are not liable for delays caused by couriers or external factors.

4. Shipping Charges
Standard Delivery: £7.99 (Free for orders over £100).
Express Delivery: £24.95.
For bulky or custom orders, shipping charges will be calculated based on the weight and dimensions of your package.

5. Tracking Your Order
Once your order is dispatched, you will receive an email with a tracking link to monitor your shipment. If you do not receive this information, please contact our support team.

6. Damaged or Lost Shipments
If your order arrives damaged or is delayed beyond the expected delivery time, kindly reach out to us immediately. We will assist you with replacements, refunds, or further inquiries.

7. Contact Us
For any shipping-related questions, feel free to contact our customer support:
📧 Email: procurement@rubberfitfloors.co.uk
📞 Phone: 07404270642
Address: 9 Fiveacre Close, Thornton Heath, CR7 6AS