• Oak

• 2.7m length

• Lacquered finish

• Wood flooring stair nose

• Long oak profile for finishing exposed stair edges

Finished Oak Profile for Wood Flooring Stairs

This 2.7m oak stair nose is designed to create a more complete finish where wood flooring meets the exposed front edge of a stair tread. It provides a defined transition around the step and helps cover the unfinished edge that may otherwise remain visible after the flooring has been installed.

The natural appearance of oak makes the profile suitable for interiors where the stair trim needs to complement timber flooring rather than contrast with it. As oak is a natural material, variations in grain pattern and shade may be visible along the length.

What the Lacquered Surface Provides

The profile is supplied with a lacquered finish, so the visible oak surface has already received a coating. This can reduce the preparation required compared with completely unfinished timber and gives the nosing a more complete appearance before installation.

The exact sheen, colour tone and lacquer specification are not stated in the supplied information. The profile should therefore be compared with the existing floor in natural and artificial light, particularly where a close colour match is important.

Making Practical Use of the 2.7m Length

A total length of 2.7 metres provides enough material to cut several stair-width sections in many domestic installations. The actual number of steps covered will depend on the width of each tread and the amount of material lost during measuring and cutting.

Each step should be measured separately because staircase widths are not always identical from top to bottom. Planning the cuts before shortening the profile can help reduce waste and make better use of the available length.

Checking Compatibility with the Stair Edge

The supplied details do not state the width, height or cross-sectional shape of the stair nose. These dimensions are important because the profile must fit the flooring thickness and sit correctly around the front of the tread.

Before ordering, check the depth of the installed wood flooring, the shape of the stair edge and the available fitting area. A technical drawing or confirmed profile measurement may be needed where the staircase has a rounded edge, an overhang or limited clearance.

Cutting, Installation and Ongoing Care

Oak can generally be cut using a fine-tooth saw suitable for timber. The profile should be measured accurately and supported securely while cutting to reduce splintering. Any rough fibres at the cut ends can be smoothed carefully before fitting.

No fixing method or included installation materials are confirmed in the supplied details. The appropriate adhesive or mechanical fixing will depend on the profile design and the stair substrate. Once installed, the lacquered surface should be cleaned with products suitable for coated wood, avoiding excessive moisture and abrasive cleaners.

Frequently Asked Questions

Is this stair nose made from oak?

The supplied product information lists the material as oak. It has therefore been described as an oak stair nosing rather than as an oak-effect profile. The available details do not state whether the construction is one solid piece, engineered timber or another oak-based format, so no more specific construction claim has been made.

Is the oak stair nosing already finished?

Yes, the product title identifies the oak as lacquered, which indicates that a surface coating has already been applied. However, the lacquer type, sheen level and exact colour are not specified. It is sensible to compare the profile with the intended wood floor before installation because lacquer can make oak appear darker or warmer.

How many steps can be covered with a 2.7m length?

The number of steps depends entirely on the width of the staircase. A 2.7m profile may provide several individual sections after cutting, but allowances should be made for trimming and possible errors. Measure each tread separately, add the required widths together and compare that total with the full profile length before cutting.

What are the width and height of the stair nose?

The supplier information confirms the 2.7m length but does not provide the width, height or cross-sectional dimensions. These measurements are essential for confirming compatibility with the flooring thickness and stair edge. They should be checked before purchase where the fit must match an existing installation precisely.

Are adhesive or screws supplied?

The supplied specifications do not confirm that adhesive, screws or any other installation materials are included. They also do not identify the required fixing method. The correct installation approach will depend on the shape of the profile, the type of staircase and the condition of the underlying surface.

Can the profile be cut to match individual steps?

Oak profiles can generally be shortened using an appropriate fine-tooth timber saw. Each section should be measured and marked carefully before cutting, and the profile should be supported to reduce movement and splintering. The cut end can be smoothed lightly so it sits neatly against the side of the staircase.

Can additional stain or lacquer be applied?

The profile is already described as lacquered, so an additional coating may not bond correctly without suitable surface preparation. Applying another stain, oil or lacquer could also change the appearance. Check compatibility with the existing coating and test any intended treatment on an offcut or concealed area before treating the full profile.

At Rubber Fit Floors, we are committed to delivering your orders efficiently and securely to your doorstep. Here’s everything you need to know about our shipping process:

1. Shipping Destinations
We currently ship to the United Kingdom, covering all regions including mainland UK, Northern Ireland, and the Scottish Highlands. If you’re located outside the UK, please get in touch with us to discuss custom shipping options.

2. Processing Time

An order confirmation email does not constitute acceptance of your order. Acceptance occurs only when the order has been dispatched. All orders are processed within 1–2 business days.
Orders placed on weekends or holidays will be processed on the next working day.

3. Delivery Time
Standard Delivery: 3–5 business days.
Express Delivery: 1–2 business days (available at an additional charge).
Delivery times are estimates only and not guaranteed. We are not liable for delays caused by couriers or external factors.

4. Shipping Charges
Standard Delivery: £7.99 (Free for orders over £100).
Express Delivery: £24.95.
For bulky or custom orders, shipping charges will be calculated based on the weight and dimensions of your package.

5. Tracking Your Order
Once your order is dispatched, you will receive an email with a tracking link to monitor your shipment. If you do not receive this information, please contact our support team.

6. Damaged or Lost Shipments
If your order arrives damaged or is delayed beyond the expected delivery time, kindly reach out to us immediately. We will assist you with replacements, refunds, or further inquiries.

7. Contact Us
For any shipping-related questions, feel free to contact our customer support:
📧 Email: procurement@rubberfitfloors.co.uk
📞 Phone: 07404270642
Address: 9 Fiveacre Close, Thornton Heath, CR7 6AS