• Five Slats

• 900mm Length

• Champagne Finish

• 46mm x 30mm Profile

• Rubber-Insert Stair Nosing Set for Five Coordinated Step Edges

A Matching Finish Across Multiple Steps

This pack contains five stair nosing slats, making it suitable for updating several steps with a consistent edge finish. Each slat has a champagne-coloured appearance and a contrasting rubber insert positioned along the main contact area.

Using matching profiles across a staircase can create a more coordinated result than replacing individual stair edges with different trims. The five-piece pack may also reduce the need to order each nosing separately when several steps have similar dimensions.

The profiles are supplied in new condition and measure 900mm long. Every step should still be measured individually, as widths can differ slightly across the same staircase.

Understanding the 46mm x 30mm Profile

Each stair nosing measures approximately 46mm across the upper section and 30mm down the front face. This shape allows the slat to cover the outer corner of the step while leaving most of the existing tread visible.

The 900mm length is suitable for many standard domestic stairs, but it should not be assumed to fit every staircase without adjustment. The width of the step, surrounding skirting and any uneven side edges should be considered before installation.

Where shortening is required, the profile and rubber insert should be cut carefully using tools appropriate for their construction. The supplied information does not confirm the main profile material, so this should be checked before selecting cutting equipment.

Champagne Colour with a Rubber Insert

The champagne finish offers a softer alternative to standard silver, grey or black stair trims. It can coordinate with warm-toned interiors, neutral floor coverings and decorative fittings without creating an excessively dark edge around the step.

A rubber insert runs along the profile and creates a distinct contact area at the front of the stair. It also provides a clear visual break between the champagne-coloured profile and the surrounding floor covering.

No independently verified slip-resistance rating has been supplied for the insert. The rubber section should therefore be kept clean, dry and free from grease or loose debris, while the staircase should continue to be used with normal care.

Check the Stair and Fixing Method Before Installation

The supplier information does not confirm whether screws, adhesive or another fitting system is included. The appropriate installation method should therefore be established by checking the profile construction, packaging instructions and material beneath the existing floor covering.

Before fitting, each step should be clean, level and structurally sound. Loose carpet, damaged wood, uneven flooring or unstable step edges should be repaired rather than concealed beneath the nosing.

The profile should be positioned without fixing it first so that its fit can be checked along the full width of the step. Professional installation may be appropriate where the stair structure, fixing method or compatibility of the existing flooring is uncertain.

Cleaning and Long-Term Care

Loose dust and grit should be removed regularly from the rubber insert because accumulated debris may affect its appearance and surface contact. A soft brush, vacuum or lightly damp cloth can normally be used for routine maintenance.

Cleaning products should first be checked for compatibility with both the rubber insert and the champagne-coloured profile. Abrasive pads, harsh solvents and excessive water may mark the finish or affect the surrounding floor covering.

Once installed, each slat should be inspected periodically for movement, lifting or damage. Any loose profile should be secured promptly because an unstable stair edge can create an uneven transition underfoot.

Frequently Asked Questions

How many stair nosing slats are included?

The pack contains five individual stair nosing slats. This quantity is useful when several steps require the same champagne-coloured profile and rubber insert. Count the number of steps and measure each one before ordering, as one pack may not be sufficient for a complete staircase.

What are the dimensions of each profile?

Each slat measures approximately 900mm long, 46mm across the upper section and 30mm down the front face. These dimensions should be compared with the width and shape of the intended step before fitting because staircase sizes, coverings and edge profiles can vary between properties.

Can the 900mm slats be shortened?

The profiles may need to be shortened where the stair is narrower than 900mm. However, the main profile material is not confirmed in the supplied information, so its construction should be checked before choosing a cutting tool. Measure carefully and ensure the finished ends are smooth before installation.

What material is the main stair profile made from?

The supplied specifications confirm that the insert is made from rubber but do not identify the material used for the main champagne-coloured profile. It should not be described as aluminium, PVC or another material without further confirmation from the packaging or product documentation.

Are screws or adhesive included?

The seller information does not state whether screws, adhesive or other fixings are supplied. Check the packaging and fitting instructions before installation. The correct fixing method will also depend on whether the profile is being installed over wood, carpet, laminate or another stair covering.

Does the rubber insert make the profile anti-slip?

The rubber insert adds a separate contact surface along the stair edge, but no tested slip-resistance rating has been supplied. It should not be treated as a guarantee against slipping. Secure installation, regular cleaning, suitable lighting and keeping the stairs dry remain important.

Is the five-piece pack suitable for a full staircase?

That depends on the number and width of the steps. The pack contains five profiles, so several packs may be required for a complete staircase. Measure every step and calculate the total quantity before ordering, including any additional piece needed to allow for cutting errors or unusual stair widths.

How should the profiles be maintained?

Remove dust and loose grit regularly using a soft brush or vacuum. Marks may be wiped with a lightly damp cloth and a cleaner compatible with the profile and rubber insert. Avoid harsh chemicals, abrasive pads and excessive moisture, and check periodically that every slat remains secure.

At Rubber Fit Floors, we are committed to delivering your orders efficiently and securely to your doorstep. Here’s everything you need to know about our shipping process:

1. Shipping Destinations
We currently ship to the United Kingdom, covering all regions including mainland UK, Northern Ireland, and the Scottish Highlands. If you’re located outside the UK, please get in touch with us to discuss custom shipping options.

2. Processing Time

An order confirmation email does not constitute acceptance of your order. Acceptance occurs only when the order has been dispatched. All orders are processed within 1–2 business days.
Orders placed on weekends or holidays will be processed on the next working day.

3. Delivery Time
Standard Delivery: 3–5 business days.
Express Delivery: 1–2 business days (available at an additional charge).
Delivery times are estimates only and not guaranteed. We are not liable for delays caused by couriers or external factors.

4. Shipping Charges
Standard Delivery: £7.99 (Free for orders over £100).
Express Delivery: £24.95.
For bulky or custom orders, shipping charges will be calculated based on the weight and dimensions of your package.

5. Tracking Your Order
Once your order is dispatched, you will receive an email with a tracking link to monitor your shipment. If you do not receive this information, please contact our support team.

6. Damaged or Lost Shipments
If your order arrives damaged or is delayed beyond the expected delivery time, kindly reach out to us immediately. We will assist you with replacements, refunds, or further inquiries.

7. Contact Us
For any shipping-related questions, feel free to contact our customer support:
📧 Email: procurement@rubberfitfloors.co.uk
📞 Phone: 07404270642
Address: 9 Fiveacre Close, Thornton Heath, CR7 6AS